9 Best
12 Volt Fan For Stereo Receivers
-
Product Highlights- 【fast cooling】provides maximum cooling performance while keeping noise to a minimum， airflow up to 11.89 cfm will provide you with fast cooling.
- 【versatile】square frame with excellent airflow and pressure properties， ideal replacement for noisy or broken 12v 5cm fans in 3d printers, dvd players, dvrs, switches, other network and storage devices, great for water cooling radiators or as case fans.
- 【silent brushless cooling fan】9 blade design for excellent running quietness， use these 23 db cooling fans to get near-silent operation., 12v, 4200 rpm, 11.89 cfm.
- 【long service life】they are durable and you don't need to buy another small fan in the next 20,000 hours.the coil temperature is low during operation and the service life is extended.
- ▶you will need a battery pack/power supply that supplies 12vdc and has a capacity sufficient to provide 80ma to make the fans run. a 2.5mm pitch 2-pin connector makes it compatible with your computer motherboard or 3d printer power system.
SHOWview product -
Product Highlights
- 【ac plug】dual-ball bearings have a lifespan of 50,000 hours and allows the 120mm fan 120v to be laid flat or stand upright. the usb computer fan power adapter increases maximum fan speed and enables the fan to be powered through an ac outlet. just plug it into a socket and start the fan
- 【parameter】120 x 120 x 25 mm ( 4.72 x 4.72 x 0.98 inches. ) | rated voltage: 12v | airflow: 95.8 ±10%cfm | rated current: 0.3a | bearings: dual ball | speed: 700rpm to 2800rpm | power: 3.3w | noise: ＜41db
- 【noise controllable】easy cloud 120mm usb fan with 3v to 12v multi-speed controller, you can adjust the fan speed to set the noise and airflow level to the best(maximum speed is 2800 rpm). even if used on a computer, it will not feel too noisy
- 【applicability】this computer cooling fan is designed to quietly cool pc, xboxs, playtations, ps4, receivers, cabinets, rokus, fridges, refrigerators, incubators, tvs, routers, dvrs, computers, aquariums, ham radios and more that requires cooling or ventilation; or as a replacement fan
- 【customer support】we strive to offer the excellent services out of your expectations. if you have any problems with our product, please feel free to contact us at anytime.
SHOWview product -
Product Highlights
- 【dual ball 】 premium quality for long-lasting performance, ideal for computer and mini-box fans.
- 【upgrade your 3d printer】ender 3 fan upgrade for better performance and quieter operation. easy to install with improved airflow for superior cooling. fits a range of 3d printers.
- 【efficient cooling】40mm 12v dc fan with dual ball bearings for long-lasting, reliable performance. upgraded for superior cooling of small appliances, rv fridges, and 3d printers.
- 【compact & powerful】12v dc fan with small size and powerful airflow. ideal for use in cars, electric vehicles, and other small spaces.
- 【versatile & reliable】12v dc brushless fan for a range of applications. ideal for use in small appliances, dvrs. ated | voltage:12v 0.08a | speed: 6500rpm | air flow: 7.13cfm | noise:27dba | air pressure (in h2o):0.16
SHOWview product -
Product Highlights
- Dual ball bearing allows continuous operation 24/7 without dust and high temperature concern and have a lifespan of 65,000 hours compare to sleeve bearing. even more it allows the fans to be laid flat or stand.
- Airflow: 52cfm noise: 18dba speed: 1300rpm voltage: 12vdc bearings: dual ball
- Ultra quiet fan with great volume air flow. ideal for cooling devices or cabinets that requires minimal noise. in addition, the fan's speed can be adjusted by using a different voltage (5-12v), which means that it can work at a lower voltage to achieve a silent effect.
- Can be used in both two-wire connection and three-wire connection. it is perfect for noise sensitive applications like case cooling, home theater cabinet cooling, audio video equipments cooling etc.
SHOWview product -
Product Highlights
- ❤ demension: 12v 90x90x25mm(3.62*3.62*0.98inch)dc fan 0.28a at noise level around 36dba ,speed 3000rpm airflow around 59cfm can satisfied with daily cooling but not noisy.
- ❤ voltage specification:the 90mm fan can be worked from 7v-12v ,if with 7v , speed at 2000rpm whisper quiet ,at 12v ,full speed at 3000rpm ,high aifrflow but little noisy.
- ❤ moisture proof: 90mm 9cm moisture-proof fan designed for humidity area or electronics equipment cooling,especially for some diy cooling in green house,wet place or device fan replacement.
- ❤ 2pin 2wire connector: 92mm 12v dc fan with 2pin xh2.54 connector(can not work for pc case unless you do some revision),easy installation and operation.
- ❤value 2-pack: it comes with 2pcs 80mm 8025 fan ,you will get 2pcs fans for replacement.
SHOWview product -
Product Highlights
- When working at high power, the system will detect the temperature rise and run the fan by itself.
- The intelligent cooling fan is used for chip cooling control. under the condition of low power operation, the low heat generating fan does not need to operate, avoiding noise and saving electric energy.
- Use tda7498 power amplifier chip. 100w+100w class d audio amplifier. crystal shell, beautiful and generous.
SHOWview product -
Product Highlights
- Specification: the 12v dc brushless fan is 120mm x 120mm x 32mm 4.72inch x 4.72inch x 1.26inch current: 1.2a 2pin xh2.54 connector , speed:3000rpm±10% around 31.62cfm, noise level: 60dba.
- Noise level: this 120mm high speed blower fan with very powerful airflow and also will be noisy,if working at 12v voltage,noise level is 60dba (like a stand pedestal fan working)
- ☔ moisture-proof: 120mm blower fan with ip44 rating moisture-proof technology designed for humidity or outdoor area exhaust cooling.verified test immersed into 4cm water for 4 hours under 70% -80% humidity.
- ⚡︎ 5-12v voltage : 12v high speed blower fan airflow can be adjusted by voltage,5v :1500rpm airflow:15cfm noise:48dba, 7v:2000rpm airflow:20cfm noise:53dba,9v: 2300rpm airflow:25cfm noise: 57dba.
- Wide application: the blower fan can be widely used in refrigerator cooling, av receiver & media cabinet,xbox,wifi router, stereo amplifier ,car seat cover cooling and diy inflatable decoration cooling.
SHOWview product -
Product Highlights
- 【superior cooling efficiency】designed for projects in high humidity environments or hot confined spaces that requires cooling or ventilation; circulate fresh air; popular used in rv fridge, inclosed stereo cabinet, small mushroom fruiting chamber, vivariums, terrariums, solar inverter heat sink, oil burning heaters, compressor, diy solar generator
- 【easy to installation】includes a 12v dc 80mm x 25mm small waterproof ip67 fan; 2pcs metal grills for full protection, and 4pcs screws & nuts; additionally, you are not restricted in how you install the waterproof fan; choose between laid flat or stand upright; help to keep the air circulating in your internal components and make it cooler
- 【waterproof ip67 rating】gdstime small waterproof dc axial fans are built to withstand the humid/dust-exist harshest outdoor environments; use your equipment without worrying about rain, splashes, dusty conditions, or brief submersion; idea for any outdoor electronic equipment cabinet or diy project
- 【waterproof motor long-lasting up to 50000hrs】all our 120mm ip67 fans feature a brushless motor with precision dual ball bearings; the pcb board and whole motor of the fan iscoated with a cured layer of adhesive film for protection against moisture, water and dust; even during rainy weather, without worrying about water damage
- 【fan spec】size (l x w x h): 3.15 x 3.15 x 0.98 in / 80 x 80 x 25 mm | fan speed: 2800 rpm | rated voltge: 12v | power: 0.16a 1.8w | airflow: 43.6 cfm | noise: 31dba | static pressure: 0.31 in h2o | connector: xh2.54-2pin | cable length: 15.75 in / 400 mm (red wire "+" black wire "-")
SHOWview product -
Product Highlights
- Operating voltage range：5.5v to 13.8v. (overtake to 13.8v, it can also work. but not safe, and seriously affects lifespan of fan.)
- Speed: 4500rpm ; air flow: 179.2cfm ; noise: 54.2dba; bearing type: dual ball bearing
- Dimension of outer the frame is 120mm(l) x 120mm(w) x 38mm(h) / the size of fan in inch is 4.72in(l) x 4.72in(w) x 1.5in(h); the center to center distance beween the mountiong holes is 105±0.3mm/4.13in.
- High speed: this model is designed to maximize airflow and can be too loud for some applications.
- Please comfirm the fan size, voltage, connector and other parameters before purchase.
SHOWview product
Coupon copied
