10 Best
3 Stage Snow Blowers
-
Product Highlights- Rubber paddle 1/4" thick(2"w x 5"l), made from styrene butadiene rubber (sbr rubber) ,sbr rubber with minimum tensile strength of 725 psi (5 mpa),hard rubber with a durometer of 65-75 ; metal strap with holes - 1 3/8" w x 3 3/4"l ,punched flat bar stainless steel materials, 1/16" thick
- The purpose of the kit : this kit reduces the existing “gap” between the snow blower's impeller blades and the impeller chamber wall. the smaller the gap, the greater your machine's operational efficiency and snow throwing capability will be, and the less likely that your machine will clog up with snow.
- Product includs:3-rubber paddle , 3-metal straps , 9-bolts & lock nuts , 3-self-tapping screws;premium 304 stainless steel reinforcement plate & hardware
- Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; hex bolts,hex lock nuts nylon inser,self-tapping screw (#14 x 1),sheet metal screw, hex washer head self drilling, stainless steel materials
- Note: not compatible with ariens compact 24 snow blower. purchase notes: pleases make sure the part number of new replacement matches your original equipment before ordering. if you encounter any problem, feel free to let us know. we will be more than happy to reply your message within 24 hours.
SHOWview product -
Product Highlights
- Product information: product included 2 x snow blower rolling skid shoes please refer to the pictures for product specific size information.
- Also compatible with 31ah64eg700, 31ah64fg700, 31ah65fh700, 31am63ff752, 31as63ee700, 31as63ef700, 31as63ef729, 31ah64fg795, mp28 (31ah64fg795), 31ah65fh783, 31as63ee783, rm2410 (31as63ee783), rm2610 (31am63ff783), rm2860 (31ah66fg783), rm3060 (31ah65fh783), 31as63ee731 following snow thrower
- Replaces part number / alternative model: 490-241-0038
- Compatible with craftsman, troy-bilt, cub cadet, a-riens, mtd, yard machines, husqvarna and yard-man.
- Skid shoes improve handling and maneuverability of snow blowers and do not wear out as easily as fixed steel or plastic skids, making snow removal easier to operate and maneuver, effectively protecting driveways, sidewalks, garages and porches from scratches.
SHOWview product -
Product Highlights
- Product includes: 2* universal roller skid snow thrower shoes (roller wheel outside diameter: 1.98), 4* washers and 4 sets of bolts nuts
- Compatible with mtd models: 31ah64eg700, 31ah64fg700, 31ah64fg795, 31ah65fh700, 31ah65fh783, 31am63ff752, 31as63ee700, 31as63ee731, 31as63ee783, 31as63ef700, 31as63ef729, mp28 (31ah64fg795), rm2410 (31as63ee783), rm2610 (31am63ff783), rm2860 (31ah66fg783), rm3060 (31ah65fh783)
- Fits machines with 2-3/4" and 3" bolt centers.fits many brands of two-stage and three-stage snow throwers
- Compatible with craftsman, troy-bilt, cub cadet, ariens, mtd, mtd pro, yard machines, and yard-man
- Will not wear down like fixed steel or plastic skids, protects surfaces from scuffing and scraping, makes handling and maneuvering easier, works in temperatures down to 30 degree below zero
SHOWview product -
Product Highlights
- Fits 2-stage / 3-stage snow blowers with a 357cc 10hp/ 11hp/ 12hp engine
- This is oem huayi carburetor, the highest quality replacement carburetor.
- Fitment: fits sears craftsman 357cc snow blower throwers
- Package included: 1x carburetor as pictured
- Easy to install. manufactured to precise oe requirements for perfect fit. reliable performance
SHOWview product -
Product Highlights
- ️ wide range of application: craftsman, mtd, cub cadet a-riens most 2-stage and 3-stage snow thrower snowblowers.
- ️ durable materials: 490-241-0038 snow blower skid shoes are made of durable polyurethane material, which is durable, cold resistant and has a long service life.
- ️ suitable size model: 2-3/4" slot and 3" bolt centers.snow blower skid shoes.
- ️ compatible with craftsman, troy-bilt, cub cadet, a-riens, mtd, mtd pro, yard machines, husqvarna and yard-man.
- ️ note: please pay attention to the size of the skid shoes and compare with your original one’s size to ensure it can replace yours..️ product characteristics: the universal roller skid snow thrower shoes improves the operability of the snowblower, effectively protects driveways, sidewalks, garages and porches from scratches, and does not wear out as easily as fixed ste...
SHOWview product -
Product Highlights
- Bolts and locking nuts: hex bolts are 5/16-18 x 1inch coarse threaded with 5/16-18-locking nuts (install with 1/2inch wrench and socket). package also comes with 9 self-locking screws, all screws are made of high-quality metal materials.
- : rubber slurry is made of high-quality rubber, the size of the thick rubber paddle is 1.9inch w x 4.9inch l, with a minimum tensile strength of is 725 psi (5 mpa). metal band is approximately 1.3inch wide x 3.7inch long.
- Function: this snow blower impeller conversion kit reduces the existing "space" between the snow blower's impeller blades and the impeller chamber wall. the smaller the space, the higher the machine's operating efficiency and snow-throwing capacity, and the less likely it is that the machine will become clogged with snow.
SHOWview product -
Product Highlights
- Product dimensions: 3-rubber paddle, 3-metal straps, 9-hex bolts & hex lock nuts, 3-self-tapping screws; the size of rubber paddle: 5" length x 2" width x 3/8" thick - size of metal strap: 3-2/3" length x 1-3/8" width x 1/16" thick, the number of impeller blades your machine has will determine whether you need the three, four, five or six blade kit.
- Installation precautions: if the gap varies around the chamber wall, you must install the rubber to fit the spot where the gap is the smallest, otherwise, the rubber will fail, the rubber paddles mounted should be installed so they are barely touching. if you have a single-stage snow blower, or your gap is less than 1/4" or greater than 5/8", you probably don't need or ...
- This blade modification kit is designed to eliminate clogging issue by reducing the space between impeller blades and discharge chute; increased snow blowing efficiency and increased snow throw distances, quality durable rubber pad for long time use under extreme weathers.
- The 3/8" thick paddles are 50% thicker and so are considered to be "heavy duty". 3/8" inch thick rubber paddles will last longer and handle a heavier load of snow than the 1/4" thick paddles, generally, the heavier, wetter and deeper the snow, the thicker the rubber paddle for greater performance. tired of manually cleaning snow between the impeller blades and discharge...
- Note: please match the part number with part number on the old part to ensure fitment before purchasing. before starting the installation, remove the spark plug cable to insure your safety.
SHOWview product -
Product Highlights
- (3) 1/4" thick rubber paddle (2"w x 5"l),(3) metal strap with holes - 1 3/8" w x 3 3/4"l,(9) bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket),(3) self-tapping screw (#14 x 1)
- Included item are detailed in the product pictures
- Three blade snow blower impellers qty (3) rubber paddles qty (3) metal straps qty (9) bolts & lock nuts qty (3) self-tapping screws
- Made of superior quality raw material, stable characteristics and high reliability.
- Excellent quality, fast delivery, simple after-sales. we make every effort to provide customers with satisfactory service.
SHOWview product -
Product Highlights
- (3) 3/8" thick rubber paddle (2"w x 5"l),(3) metal strap with holes - 1 3/8" w x 3 3/4"l,(9) bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket),(3) self-tapping screw (#14 x 1)
- Included item are detailed in the product pictures
- Qty (3) rubber paddles, qty (3) metal straps,qty (9) bolts & lock nuts,qty (3) self-tapping screws.
- Made of superior quality raw material, stable characteristics and high reliability.
- Excellent quality, fast delivery, simple after-sales. we make every effort to provide customers with satisfactory service.
SHOWview product -
Product Highlights
- Product standard: rubber paddle 1/4" thick(2"w x 5"l), made from styrene butadiene rubber (sbr rubber) ,sbr rubber with minimum tensile strength of 725 psi (5 mpa),hard rubber with a durometer of 65-75 ; metal strap with holes - 1 3/8" w x 3 3/4"l ,punched flat bar stainless steel materials, 1/16" thick
- Note this modify kit is for improving the performance of two-stage blowers. for single-stage blowers or those with small (<1/4’’) or large (5/8’’) gap, this kit is probably not needed.
- Extensive use: snow blower modifies impeller kit 1/4" universal 3-blade - for modifies 2-stage machine
- Product standard: bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; hex bolts,hex lock nuts nylon inser,self-tapping screw (#14 x 1),sheet metal screw, hex washer head self drilling, stainless steel materials
- 100% quality guarantee: if you have any problems, please let us know in time. we will help you solve them within 24 hours and provide you with the best service
SHOWview product
Coupon copied
