7 Best

Auto Car Acc Fuel Pumps

of May 2024

  1. Product Highlights
    • 【safe operation】- except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. before use, be sure to heat the car engine to 104 ° f-140 ° f, avoid clogging the oil pump due to oil solidification.
    • 【accessories & precautions】- the oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*oil-proof gloves, 2*battery clips, 1*user's manual. please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. the suction power of the micro suction pump is limited. please do not connect other extension tu...
    • If the oil cannot be pumped after the oil change pump is started, please do not start it all the time to prevent overheating from damaging the oil change pump. please use the product according to the instructions
    • 【engine oil change made easy】 - dc 12v 100w has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.7l / m, oil flow 0.35l / m).
    • 【warning】: this product is not suitable for gasoline/petrol. do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc) if there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result.
  2. Product Highlights
    • 𝐈𝐍-𝐋𝐈𝐍𝐄 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: fits 5/16 "oil pipe, 5/16" joint or connector at each end, transparent plastic shell, orange inner filter, with metal brass end caps on the top and bottom of the filter, filter out impurities and precipitation in gasoline, reduce parts wear and protect the engine, direct installation, simple and convenient.
    • 𝐅𝐔𝐄𝐋 𝐋𝐈𝐍𝐄: the wall thickness is 3.2mm. the inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. oil resistant, cold-resistant and ethanol tolerance.
    • 𝐄𝐋𝐄𝐂𝐓𝐑𝐈𝐂 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: model: hep-02a; material: copper clad aluminum; voltage: 12v; current: 2a; output pressure is 3-6 psi, pressure : 0.032-0 .045 mpa; which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel.
    • 𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: you will get a universal 12v (3-6psi) electric fuel transfer pump + 2m/79-inch reinforced fuel pipe + 5/16-inch fuel filter + 10 hose clamps. the kit fit all 12 volt cars (such as toyota, ford, honda, mazda, and any other suitable car), trucks, boats & generators, lawnmower.
    • 𝐏𝐄𝐑𝐅𝐄𝐂𝐓 𝐒𝐄𝐑𝐕𝐈𝐂𝐄: if you are not satisfied with our electric fuel pump kit, please return them within 30 days for a full refund. truly hassle-free shopping experience!
Coupon copied
Opening Product name Amazon page In 05 seconds Cancel
Get exclusive articles, recommendations, shopping tips, and sales alerts
Sign up for our newsletter to receive weekly recommendations about seasonal and trendy products
Coupon copied to clipboard
We use cookies to enhance the security, performance, functionality and for analytical and promotional activities. We use cookies to personalize ads for you. By continuing to browse this site you're agreeing to our Privacy Policy. Got It
You're currently offline