10 Best
Automotive Replacement Fuel Gauges
-
Product Highlights- E, 1/4, 1/2, 3/4, and f with a 60 dial sweep
- Includes mounting hardware and 12 volt internal back lighting
- Standard 2" black dial for 2-1/16" opening
- Features a chrome bezel with removable chrome mounting panel
- Requires fuel level sender sp0f000013 and only for 12 volt negative ground systems, full: 33 ohm, empty: 240 ohm
SHOWview product -
Product Highlights
- Feature:glycerin liquid filled gauge for consistent readings hot or cold. accurately and reliably monitors fuel pressure.reads in half pound increments across a range from 0 to 15 psi
- Accuracy: +/-3-2-3%, 1-1/2" dial size
- Glycerin liquid filled gauge for consistent readings hot or cold. accurately and reliably monitors fuel pressure.reads in half pound increments across a range from 0 to 15 pounds
- Standard:1/8 inch npt male fitting supports a direct connection to any adjustable regulator. empowers you to easily make changes with an adjustable fuel pressure regulator .
- Free returns and warranty: we accept free return and replacement if it is not the correct one. and guarantee with one year limited warranty.
SHOWview product -
Product Highlights
- 8 color adjustment cycle modes： includes red, green, blue, white, yellow, yellow green, orange，purple，customizable according to personal preferences
- Product characteristics： stainless steel shell silver+white background color，high precision, long life, good shock resistance, waterproof and anti fog。
- Durable material：ip67 protection grade 100% waterproof 316 stainless steel bezel with anti fog curved glass。
- Working environment and installation：indication range: e~f，working voltage: 9-32v dc（fit 12-24v），working temperature: - 30 ~ + 75 ℃，installation size: 52 mm (2 - 1/16"），suitable for all kinds of fuel level sensors with same signal, and display liquid level of the oil tank
- Adjustable signal：the default signal of the fuel gauge is 0-190ohm, which can be adjusted by long pressing the mode key，r-value adjustable range，0-190 ohm，0-180 ohm，10-180 ohm，240-33 ohm，240-30 ohm
SHOWview product -
Product Highlights
- 2.waterwich fuel gauge diameter is 2-1/16 inch (52mm), indicating range is e-1/2-f,the fuel gauge is suitable for 240-33ohm voltage 12v fuel level sensor
- 4.auto gas gauge meter’s race proven mechanical instruments provide trusted accuracy while being simple to install and direct replacement
- 1.easily display at night:our fuel level gauge is highly visible with a white light,easy viewing at all angles during any lighting conditions,practically and safely when driving at night
- 3.material: the shell of fuel gauge is made of abs and metal material, which is scratch-resistant and wear-resistant, corrosion-resistant and has a long service life.our gauge kit includes: fuel gauge *1, instrument frame *1, nut washer *1 set, instruction manual *1
- 5.power supply: suitable for 240-33ohm fuel level sensor with voltage of 12v.diameter 2 "52mm automobile universal digital fuel tank gauge meter,wide compatibility for recreational vehicles, yachts and motorcycles.car,suv,truck,vehicle automotive etc
SHOWview product -
Product Highlights
-
2、［a fine replacement fuel guage］ the needle is smooth sweeping and surpasses the original version in the boat(the needle doesn't bounce all over the place as the boat is underway or in rough sea conditions).
it allows the user to remotely monitor the liquid level in the tank. this level gauge will work with any level sender with american standard (240-33 ohm... -
4、［good readability］ great visual contrast on gauge face. the red backlighting is not too bright or dim, looks really good during the day but even better at night lit up.
-
1、［easy to mount, convenient to wire with the plug ］mounting size: 2 1/16 inch , or 52mm the instructions is easy to follow and the installation takes less than 10 minutes.
-
3、［body material］ip67 waterproof and dustproof grade,316 stainless steel bezel signal:240-33ω | indicating range: empty-full, working voltage: 9-32v
-
5、［package included］1×fuel level gauge,1×connector cable,1×installation instruction.
SHOWview product -
2、［a fine replacement fuel guage］ the needle is smooth sweeping and surpasses the original version in the boat(the needle doesn't bounce all over the place as the boat is underway or in rough sea conditions).
-
Product Highlights
-
［easy to install and wire up ］mounting size: 2 1/16 inch , or 52mm, well illuminated and good instructions. the installation takes less than 10 minutes.
-
［body material］ip67 waterproof and dustproof grade,316 stainless steel bezel signal:240-33ω | indicating range: empty-full, working voltage: 9-32v
-
［a fine replacement fuel guage］ the needle is smooth sweeping and surpasses the original version in the boat(the needle doesn't bounce all over the place as the boat is underway or in rough sea conditions).
it allows the user to remotely monitor the liquid level in the tank. this level gauge will work with any level sender with american standard (240-33 ohms)... - ［easy to read, good fit and finish ］the red backlighting is bright enough at night.
-
［package included］1×fuel level gauge,1×connector cable,1×installation instruction.
SHOWview product -
［easy to install and wire up ］mounting size: 2 1/16 inch , or 52mm, well illuminated and good instructions. the installation takes less than 10 minutes.
-
Product Highlights
-
［a fine replacement fuel guage］ the needle is smooth sweeping and surpasses the original version in the boat(the needle doesn't bounce all over the place as the boat is underway or in rough sea conditions).
- ［easy to install and calibrate］ install diameter: φ52mm or 2-1/16'', indication range: e~f, working voltage: 9-32v dc [ fit 12v-24v vehicle or engine] the instruction is easy
-
［adjustable and wide application］100tech fuel level gauge is designed to measure & display the amount of gas or fuel in your boat or vehicle's gas tank. signal input : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm.
-
［7 color adjustment cycle modes］ includes red(default), green, blue, white, yellow, yellow green, orange, purple allow you to match your factory dashboard lights or add a custom style to the interior of your vehicle.
- ［body material］ip67 waterproof and dustproof grade,316 stainless steel bezel100tech guarantees with 1 year limited warranty & free lifetime technical support
SHOWview product -
［a fine replacement fuel guage］ the needle is smooth sweeping and surpasses the original version in the boat(the needle doesn't bounce all over the place as the boat is underway or in rough sea conditions).
-
Product Highlights
- 52mm (2") diameter:standard 52mm (2") dial for a 52.4mm (2-1/16") opening and requires 12-volt negative ground systems, and compatible with most ohm range (240 - 33 ohm) sending units.
- Durable & anti-rust:black aluminum bezel with burnished edge,scratch resistant curved glass lenses
- Measures fuel level:the fuel level gauge will accurately display fuel level remaining in your gas tank. it's ideal for anyone who is building a custom dash or looking to replace their stock fuel level gauge.(notice:if you don’t know how to install it, please see the second installation picture)
- Fltments:suitable for 240-33ohm signal fuel level sensor properly. pls confirm your sensor's signal.
- Easy to read and install:high sensitivity and easy operation.rear twist-on mounting ring is included for easy installation.but professional installation is highly recommended.
SHOWview product -
Product Highlights
- This fuel injector pressure tester is suitable for most gasoline engine fuel injection systems except: bosch, cis jetronic, throttle body systems on gm vehicles. as the scale range for the meter is only 140psi, the tester is not suitable for diesel high pressure fuel injection pump and high pressure fuel track on direct-injection engine.
- The pressure gauge uses metal gauge head with shockproof rubber cover, 3-1/2" big dial with clear dual scale range 0-140 psi and 0-10 bar. compared to a large range, this oil pressure gauge is easy to read about 1-2 bar with a short range. the 2 hoses are made of rubber nylon resin and the length are 15" 8", with working pressure is 300 psi. there is a drain hose with p...
- This fuel injection pump detector is a professional tool to test the compression in gasoline engine fuel injector system. the readings will help to diagnosis if there are kink/leak/clog on inlet/outlet side components, a detective fuel pump or fuel pressure regulator, low tank pressure. gasoline is highly flammable, please ensure no open flames nearby and operate by pro...
- There are several parts to implement 2 types connection methods. use the specialized parts and hose to connect pressure gauge directly to fuel pump's standard schrader / m6 / m8 / m10 / m12 / m14 fuel pressure test port. or use t type parts insert in-line between the fuel pump and engine for most other vehicles. no small schrader connector, do not compatible for part fo...
- The connectors are made of brass and aluminium, featured with high hardness, rustless, durable and good air sealing. also we supply 1 year warranty, please feel free to purchase. please contact us by amazon message system if there is any question, we will reply in 24 hours
SHOWview product
Coupon copied
