10 Best
Band Saw Uses
-
Band Saw HandbookBand Saw HandbookUnion Square & Co.CloseMore InfoMore Deals -
Product Highlights
- Uses a miter bar and knobs to secure the guidepro in position ideal for repetitive cuts
- Secures guidepro in a 3/4-inch (19-20mm) miter slot
- For use with the guidepro
- Extends use of the guidepro to the router or table saw
- Anchor bar includes left and right preset 13 degree angle
SHOWview product -
Product Highlights
- Exclusive use of low-tensioned , high ductile swedish silcon steel
- Unique geometric gullet designs and sets
- Legend: w = width l = length tpi = teeth per inch ts = tooth style
- Teeth are milled, not stamped or crush ground for razor sharp edges
- Electro-heat induction hardened for longer life
SHOWview product -
-
-
-
Product Highlights
- Durable.the featherboards are made of an extremely durable plastic composite body and it will stand up to years of heavy use in your woodshop.
- Widely applicable size: two widths miter bars（3/8 x 3/4 inch）and t-slot bolts are applicable for most standard miter slots. and associated with wedge-lock hardware and split rail miter bar construction provide maximum hold for bandsaw table, router fence and more.
- Easy to use.this unique featherboard can be quickly and easily connected to a miter slot or t-slot without the need for additional hardware.
- Safety and efficiency.the featherboard works to keep workpiece press up against the fence whole time when you are cutting,giving a nice and clean cut on that edge.make sure the mortise and tenons fit together.every woodworker needs a professional featherboard
- Guaranteed: we offer premium quality products with outstanding customer service. in the unlikely event you aren't 100% satisfied with your purchase, please feel free to contact us.
SHOWview product -
Product Highlights
- Each device in this kit is intentionally made in the safety orange color for high visibility when in use. this provides the user the ability to see exactly there hands are at during the cutting or milling process. being safety orange also allows for you to easily find the device when its not in its normal location.
- Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. the rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. the soles are also washable with with warm water. must let the rubber soles dry for 24 hours prior to using them again.
- This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. from the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
- The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. the push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. all five devices help prevent kickback and protect your fingers and han...
- The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.
SHOWview product -
Product Highlights
- Even cuts: measurement markings on jig are easy to read so you can make accurate cuts; ball-bearing roller keeps stock even while fed through the blade creating a smooth flow and applying consistent pressure
- Secure grip: easy-to-grip knob on the top turns the locking miter bar piece and holds its position firmly to secure guide position; dual-locking feature ensures the guide point locks jig in an optimal placement in a standard 3/4-inch x 3/8-inch miter slot for a specific job; roller on the end acts as a stop for the material and allows the wood to flow past the jig witho...
- Effortlessly cut thin rips: the dct woodworking thin rip table saw jig guide tool for router or band saw cutting wood / ripping chair slates, cabinet allows you to cut reproducible thin rip cuts on the alternate side of a saw blade for safety, accuracy, and cut repeatability; this jig maximizes worker safety, streamlines your workflow, and produces successful outcomes
- Safety first: protects your hands and fingers by preventing unnecessary hand proximity to the sharp blade; reduces dangerous kickback by keeping the stock completely on the track and preventing it from getting trapped between the fence and the blade; allows you to work on the free side of the blade thus avoiding unnecessary risk and stock binding
- Various applications: rip thin slates for chair backs, frames for cabinets, use with band saws and routers, or even use as a crosscut stop for making multiple cutoffs on the right side of a saw blade; setup and use instructions are included for your convenience
SHOWview product
Coupon copied
