10 Best
Bathtub Splash Guards
-
-
Product Highlights
- Will need to use silicone sealant to install properly (not included)
- These are non-adjustable
- White plastic bath and tub plastic splash guards (7/16 in. thick x 9 in. wide and 10-3/4 in. tall)
- Curved design will divert water back into tub and shower enclosure
- Will fit most bath and tub enclosures.clean mounting area thoroughly before installation.allow proper time amount of time for silicone sealant to cure before using tub and shower enclosure includes one right and one left directional splash guard.these splash guards are designed to redirect flow of excess water back into the tub.7/16 in. x 9 in. x 10-3/4 in.white in colo...
SHOWview product -
Product Highlights
- Upgraded scratch-resistant and more stable silicone base with professional-grade waterproof adhesive, not easy to fall off and will not damage the bathtub.
- Due to the silicone material can be finely adjusted, it is not limited to 90-degree corners. professional-grade adhesive can be reused, just keep the range dry if want to change the installation position.
- Our upgraded splash guard is effective blocks the gap between the shower curtain and the wall to keeps the water where it is supposed to be, is your reliable choice.
- The area of the acrylic baffle is upgraded enough to block most of the water and can be removed at will.
- Clean your ideal use position and keep it dry, tear off the protective layer on one side and press it tightly, continue to peel off the remaining layer while pressing the bottom firmly.includes two units for use on both sides of the bathtub, kitchen sink or vanity. no extra tools required, caulk is included for free.
SHOWview product -
Product Highlights
- Practical: the tub splash guard can prevent splashing of water on to bathroom floors, keep your bathroom floors safe and dry, no more floor damage caused by leaks outside of the shower curtain
- Easy to use: comes with 2 pieces acrylic adhesive tapes, self-adhesive, no tools or caulk required, the tub corner guard is non-handed flat design that is easy to install
- Acrylic material: this bathtub splash guard is constructed from acrylic, white appearance looks beautiful and tidy, can go well with different home style
- Dimension: the size of the tub corner splash guard is 8.7 x 7.3 inch, flat design can eliminate bath or shower spillovers
- What you will get: 2 sets acrylic bath tub splash guards, each set includes left and right sides, 2 pieces white acrylic adhesive tapes, each roll is 1 meter; convenient for you to replace and use for a long time
SHOWview product -
Product Highlights
- Sink water shield board: 🌊exquisite workmanship, reasonable structure, professional and practical, can bring you convenience.
- Kitchen splashbacks: effectively getting your clothes dirty to interrupt your work.
- Splashing guards for sinks: please clean the ring, keep dry, do not wet the splashing plate before installation.
- Frying splatter guard: special design and it is in fine craftsmanship. it is the best replacement for your old, broken one.
- Behind sink: made of high- grade pvc material, very , practical and long- term use.
SHOWview product -
Product Highlights
- Our easy-to-install guard bonds instantly to your tub and wall, providing an effective barrier against splash and keeping your shower area safe and dry.
- Easy and fast installation, no extra tools required. peel and stick application, just a few simple steps and you're good to go.
- Upgrade designed with an adjustable silicone base that fits most tubs and sinks, avoids water splashing or leaking from any corner.
- Aukeystar shower splash guard with a larger water-blocking area than other market options. with a more stable base and included adhesive to fill in tile gaps, this is the ideal choice for fulfilling your needs.
- Includes 2pcs water guards for use on bathtub, kitchen sink or vanity sides.
SHOWview product -
Product Highlights
- 【removable tub splash guard】honitra shower splash guard is composed of a panel and a frame that you can easily detach for cleaning, and also can reattach the shower corner water guard. honitra splash guard for shower is not only convenient to use, but also effective in preventing water splashes.
- 【easy installation & reusable】installing the shower splash guard only need to wipe, tape and press. honitra self-glue splash guard are also reusable. if you want to change or replace the position, you can use the new adhesive in the package. honitra ready-to-use shower shield make your bathing more convenient and enjoyable.
- 【90°- 105°shower splash guard】honitra bathtub splash guard is made of the silicone and acrylic, that allows you to adjust an angle between the bathtub and wall (up to 105°), helping you to avoid the hassle of filler. honitra splash guard for bathtub lets you and your family enjoy a comfortable bathing time.
- 【snug fit to the wall】honitra shower splash guard have a strong adhesive design that fits your bathtub perfectly, giving you a 0-seepage bathing experience. to ensure the waterproof effect of the shower splash guard for tub, honitra uses a special waterproof adhesive that is both beautiful and durable.
- 【sturdy & durable】honitra shower splash guard combines technology and aesthetics. the bathtub water guard was made of acrylic which is not easy to deform, and abandoned excessive color which is clean but transparent. honitra shower guard allows you to enjoy the comfort of bathing.
SHOWview product -
Product Highlights
- Bathtub splashing guard: crafted with highly transparent acrylic material, won't block sight or light and attract much attention.
- Acrylic corner splashing guard for bathtub: suitable for shower bathtubs, wash basins and sinks, providing effective water splashing prevention.
- Bathroom shower splashing guard: the simple installation process of this splash guard makes it suitable for diy enthusiasts who want to improve their bathroom's functionality and appearance.
- Bathtub splashing guard for bathroom: these splash guards are designed with proper size, will not affect your daily routine while stopping splashes.
- Bathtub corner splash guard: this versatile splash guard can be used for a variety of purposes, including bathtubs, washbasins, and more.
SHOWview product -
Product Highlights
- Upgrade design🚿: the splash guard for bathtub added a small baffle to prevent water to the corners of the outflow, more waterproof than another shower guard, and more practical. the package contains 2 shelves and 4 shower curtain clips.
- Easy to remove🚿: double-sided adhesive is strong and can be kept for a long time. you can also easily remove the shower corner water guard when not in use, you just need to use a hair dryer to heat the adhesive to soften it, and it can be easily removed without leaving a trace.
- High-quality material🚿: the bathtub splash guard is made of high-quality acrylic material, and the shower curtain clips are made of high-quality abs material, which is clean and beautiful, waterproof. shower splash guard corners are rounded, safe, and do not hurt the hand.
- Easy to install🚿: the tub splash guard comes with a roll of professional double-sided tape, strong and stable, and waterproof, you just need to stick it on the bath splash guard 2 side and then paste it on the place you need to install it, please keep the installation location dry before installation.
- Widely used🚿: shower splash guard you can install in the shower, bathtub, sink, etc. it fills the gap between the shower curtain and the wall, to prevent water from splashing outside and keep the bathroom dry and tidy. shower curtain clips can firmly fix the curtain on the wall, keeping the privacy of the space.
SHOWview product -
Product Highlights
- Quality design: corner shower shields feature a curved edge design and includes one left and one right-hand guard with mounting adhesive on both edges to prevent the splashing of water onto bathroom floors to keep the bathroom dry and clean
- Durable: shower leak guard is composed of heavy duty plastic for long-lasting reliability, and is corrosion free
- Shower splash shield: the ez-flo bathroom shower splash guards are designed to reduce the number of slip and fall accidents in the bathroom by keeping water off the floor whenever someone uses the shower or takes a bath
- Easy to install: bath tub and shower splash barrier is equipped with mounting adhesive on both edges of each guard for a quick and easy installation
- Specs: the shower splash guards each measure 7 inches wide x 9 inches high
SHOWview product
Coupon copied
