8 Best
Bowl Lathes
-
Product Highlights- Bowl sanders are the most effective and efficient tool used by woodworkers for coarse sanding and fine finish sanding convex and concave curved surfaces of wooden bowls or platters mounted onto wood-turning lathes. when sanding, let the sander tool do the work, as light pressure and constant sander movement will produce the best results. the sander has a sturdy 11" long...
- The mandrel pads have a 1" thick layer of firm foam and are designed to give enough flexibilty for sanding small or large convex and concave curves. use the soft interface pads to provide a surface protection cushion for delicate sanding.
- Premium quality dura-gold bowl sander tool kit. this professional sanding tool comes complete with both 1" and 2" hook & loop backing plates pads with 1/4" mandrels, 1" & 2" soft interface foam pads, and 50 high-performance sandpaper discs, 5 packs of both 1" & 2" discs in 60, 80, 120, 220, and 320-grit, the most common grits used for bowl sanding.
- Our premium bowl sander has an adjustable angle sanding head assembly that allows you to adjust to the angle that best fits your grip, project size, and its curves. the head is designed with two bearings to ensure that the mandrel spins freely with the rotation of your project on the lathe, which dramatically reduces the friction to prolong the life of your sandpaper di...
- Dura-gold offers an extensive product line of professional, high-quality automotive, industrial, and woodworking supplies and accessories. our premium product line selection includes sandpaper, backing plates, polishers, and polishing pads that provide exceptional performance, so you can get the job done fast, saving you time and money!
SHOWview product -
Product Highlights
- Rotatable head: the sander head rotates smoothly with the rotation of your workpiece. this keeps the sandpaper from digging in or causing unnecessary friction which tends to cause burning or marking your wood.
- Protective handle: the 7 1/2” handle covered with soft and durable foam, anti-skid and shockproof, protects your palms from being worn out.
- Sand on lathe: the sander is used for finish sanding and polishing of wood work pieces while your project is still spinning on your lathe.
- Angle adjustable: the head assembly can be set and locked at almost any angle.
- 4 pads in 2 sizes: comes with 4 foam padded heads, 2”, 3” in diameter, and 10 240-grit discs for each size.
SHOWview product -
Product Highlights
- The head assembly is completely adjustable so it can be set to any angle that you need depending on the size and curve of your project. unlike most other bowl sander head assembly’s, our bowl sander has two steel bearings to provide you with super smooth mandrel rotation while sanding on your lathe. this also helps to reduce the chance of marking your wood since the san...
- The head assembly is also capable of accepting other size sanders as long as the mandrel/shank size is 1/4 inch in diameter. please be aware however that some manufacturers say 1/4 inch in diameter when in actuality the diameter is either smaller or slightly larger. 3 brass bushings of varying depths are included to make fitting sanders with different length mandrels/sh...
- When you need to finish sand the inside of your wood turned bowl it can be a challenge to keep the wood from showing scuff marks. using a piece of hand held sandpaper can also be somewhat dangerous. our bowl sander essentially fixes this issue by having a dual bearing, smooth rotating head that spins with the rotation of the bowl while the bowl is rotating on the lathe....
- It’s all about the pressure, or more like, its all about the light pressure and consistent technique. when sanding with the 2 inch bowl sander, applying too much pressure will likely produce some unsightly results. by applying light pressure and consistently moving the sander, you will achieve the results you are looking for and in a fraction of the time it typically ta...
- We have included the most common diameter sanding head with the bowl sander. this sander head is made from a foam material that gives just enough to provide you with wonderful looking results each time you sand your projects. this 2” head size works well on most bowl turning projects since it can work with larger or smaller work pieces. also included 10 ea. 80 grit, 10 ...
SHOWview product -
Product Highlights
- Jaw clamping range: clamping diameter range from 2-1/2 inch to 7-3/4 inch
- Application: this large-diameter clamping flat jaws is specially designed for finishing and polishing woodturning bowl and plate bottoms. the jaw set is compatible with c-series chucks and some other chuck
- Material: the 8-1/4inch aluminum flat claw is made of cast aluminum, it can easily clamp the edges of plates, bowls and hollow forms
- 2-sets of fastening nuts: includes (8) 1/2 inch and (8) 3/4 inch fastening nuts, and 48 mounting holes, to securely hold your workpiece
- Accessories: our flat jaws has 16 rubber coated screws, a allen wrench is included
SHOWview product -
Product Highlights
- More durable: m2 hss is cryogenically treated, the hardness and wear resistance are increased by 6-8 times, can hold an edge well.
- Dimensions: usable flute length 6.9" - handle length 15.55" - overall length 25.1"；the shaft is 5/8" , flute is 1/2"
- Sharp: the bowl chisel has been pre-sharpened with a cbn grinding wheel, ready to use right out of the box.
- Extended handle: the beech wood handle is comfortable to use, non-slip and long enough
- Uf-sharp is committed to creating the best products with the best quality and service. if you have used uf-sharp cbn grinding wheels, you must know our ultimate pursuit of product quality. this wood turning tool will definitely bring you the best experience.
SHOWview product -
Product Highlights
- Hold round workpieces ranging from 2. 3 to 8. 3 inches in diameter
- Includes eight 1/2-inch rubber pins, eight 3/4-inch rubber pins, and 48 mounting holes
- Modify your current wen lathe chuck to keep bowls properly secured
- Easily adjust the holding diameter with the 6-position peg system
- Compatible with the wen la4374 3. 75-inch 4-jaw lathe chuck
SHOWview product -
Product Highlights
- 【material】m2 hss woodworking turning chisel heat treatment on 1100 degree, cryogenically treatment on -160 degree, 3 times heat treatment on 600 degree.
- 【remarkably fast and easy to sharpen】allows you to remove less material than before to produce a perfect razor sharp edge
- 【product size】usable flute length: 6.3", blade lengthen: 10.2", handle length: 15.3", overall length: 25.5"
- 【cryogenically heat treated m2 hss blades】results in an exceptionally long service life, up to 5 times longer than conventionally hardened hss 4341 material
- 【powerful function】for woodturners who prefer to turn wood rather than grind superior edge holding ability in oily abrasive woods, exotic woods and hardwoods
SHOWview product
Coupon copied
