10 Best
Brake Flushes
-
Product Highlights- Outer diameter: 7.4"; inner diameter: 6.3"; led quantity: 16 led (inner yellow 7 led + outer red 16 led); ip65 waterproof light fixture; the inner miro-flex faceted reflector design provides increased light output with a contemporary appearance
- Bright lights with durable feature,great for replacing your old led tail lights or side; each individual diode has a round pearl-shaped reflector giving the light a clean,custom look and superior light distribution
- 6 inch oval red/amber light serves as brake light, turn signal, and tail light: outer ring of leds comes with dual modes(high low beam) and function as tail brake lights; center clear/amber leds act as turn signal and parking light
- Easy installation with high quality durable oval rubber grommet, 4-wire connection system for ground, turn signal, brake light and running light: black wire - ground / red wire - brake light / yellow wire - turn signal light / white wire - running light/tail light
- Universal compatibility for vehicles equipped with dc12 power source supply, can be used in any truck, rv, trailers, trucks,camper, utes, utvs, boat, caravans etc.
SHOWview product -
Product Highlights
- Outer diameter: 7.4"; inner diameter: 6.3"; drill hole: 6.5"; led quantity: 23 led (inner white 7 led + outer red 16 led); ip65 waterproof light fixture; reccessed mount with grommet; the inner miro-flex faceted reflector design provides increased light output with a contemporary appearance
- Bright lights with durable feature,great for replacing your old led tail lights or side; each individual diode has a round pearl-shaped reflector giving the light a clean,custom look and superior light distribution
- 6.3 inch oval red/white light serves as brake light,stop light,tail light, running light, backup light and reverse light: outer ring of leds comes with dual modes(high low beam) and function as tail brake lights; center clear/white leds act as backup and reverse light;
- Easy installation with high quality durable oval rubber grommet, hardwired with 4-wire connection system for ground, reverse, brake light and running light: white wire - ground / red wire - brake light / yellow wire - reverse light / brown wire - running light/tail light
- Universal compatibility for vehicles equipped with dc12-24v power source supply, can be used in any truck, rv, trailers, trucks,camper, utes, utvs, caravans etc.
SHOWview product -
Product Highlights
- 【easy to use】take away the dirty brake fluid from the tank; put in the new fluid back; start the car and connect the hose between the equipment and the brake branch pump; twist the screw to be loose, but not completely. then open valve to start siphoning the fluid out.please turn off the valve after screwing when it finish.
- 【including】 brake flush kit includes : 2 x brake fluid change tool; 2 x metal adapters; 4 x plastic adapter; 1 x hose.our tool fit for universal cars, you can use the tapered spout which is offered in the package avoid air leaking; please lift the tool over the brake pump to ensure it work properly. (refer to vehicle manual for correct type)
- 【feature】1l vacuum brake fluid bleeder features a convenient hanging hook and locking trigger that allows for hands free operation. it will hold the bottle upright while you focus on other aspects of the job.
- 【application】brake jobs are some of the most common vehicle maintenance jobs that can be done at home; this brake fluid bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess; rather than waiting hours for gravity to bleed your brakes, get this simple brake fluid tool to bleed your brakes in minutes.
- 【transparency】the transparent drain hose allows you to visually inspect the old fluid during the draining process. you can easily flush your entire disc or drum brake system with this brake fluid bleeder!
SHOWview product -
Product Highlights
- Quick installation: first, successively install the rubber grommet, oval taillight with 3-prong plug onto the bracket. then align the bracket hole with the hole on vehicle, screw goes through the hole, and then tighten the nut. last connect the 3 wires to the corresponding wires on vehicles. round hole diameter is 0.39”.
- Ready for the weather: the oval taillight is highly silicone sealed, ip65 waterproof rating, always be ready for different kinds of weather attack. the mounting bracket is a durable metal coated with high-quality black powder. it is not easy to lose paint and rust.
- Awesome brightness: each tail light has 10pcs high-quality 3030 led chips to output super bright red light, high brightness of turn/brake light, low brightness for taillight, improving visibility and ensuring you a safer night.
- Upgraded unique design: nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. these help the light and grommet fit perfectly and firmly on mounting bracket, and the 3-prong plug attaches tightly on the light. shake proof, there will be no worries of loosing light or...
- Extensive application: universal fit for dc 12v system, function as turn/brake light and tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump truck, boat, special vehicle, etc. just make sure the hole size before you purchase. 2 years warranty honored by nilight.
SHOWview product -
Product Highlights
- 【ip67 waterproof】 the led taillights consist of durable pc lens and rubber outer ring, durable, waterproof, anti vibration, working well even in a rainy day.
- 【universal fit】 this round led brake lights can be used as backup lights, turn signals for dc10-30v vehicles, such as truck, trailer, bus, boat, lorry, van, caravan, etc.
- 【16led chips, high bright】 the trailer tail lights built with 16pcs led chips(10pcs red and 6pcs yellow), extremely bright! light up the rear of your vehicle, keep safe at night and in foggy or stormy weather.
- 【wiring】 black wire for negative; green wire for low beam and running light; red wire for high beam and brake light. dual color mode: red/white light
- 【package】 2x round trailer tail lights. if there is any issue about our tailights, please feel free to contact us!
SHOWview product -
Product Highlights
- 【brightness & safety】each light use 16pcs quality leds to output excellent bright light. also adopt specially designed polycarbonate lens to reflect back direct light, ensure a better visibility and safety at night
- 【easy to wire & install】just mount the grommet firstly on the pre-cut or existing holes, pop in the marker lights, and then connect to power to make it work,black wire- ground, red wire- break light, yellow wire- turn signal light, brown wire- running light
- 【multi functions】triple lighting brightness functions, 10 led red outer ring for brake or running light and another 6 leds inner circle, amber beam for turn signal light. note: this tail light is not compatible with the four-wire model at the rear of your vehicle (that is, the brake wire harness is shared with the steering wire)
- 【ready for the weather】 360° edge full coverage of rubber, not easy to fall off, protect taillights, completely sealed outlet, eliminating all possibility of moisture, ip67 waterproof rating, always be ready for different kinds of weather attack
- 【wide application】work on 12v dc system, function as brake, running, turn signal light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump truck, forklift, snowplow,excavator, rv, etc. 2 years warranty honored by nilight
SHOWview product -
Product Highlights
- Unique anti loosening design: nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, make the grommet and light tightly connected. at the same time, the 3-prong plug and socket on the back are also tightly attached, so there is no need to worry about falling off
- Sealed ip67 waterproof: ultrasonic combined with lens and housing to form a strict sealing and waterproof design. after inserting the back plug, it can also hinder water from entering. the tail light can be perfectly applied in severe weather
- Quality led: 24pcs ultra bright white/red smd leds output two levels of brightness, high brightness is for brake/turn signal/reverse light and low brightness is for tail light. clear brightness changes help to alert vehicles behind. combined with lenses, the lighting effect becomes better
- Easy flush mount: prepare a suitable hole, install grommets and lights in sequence. then attach the 3-prong plug and connect the 3 wires lead. hole size for mount: 6.69”x2.5”x1.75”
- Wide application: fit for 12v dc trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump truck, special vehicle, boats etc. function as stop brake/turn signal/back up reverse/tail light. 2 years warranty honored by nilight
SHOWview product -
Product Highlights
- Outer diameter: 7.4"; inner diameter: 6.3"; drill hole: 6.5"; led quantity: 23 led (inner white 7 led + outer red 16 led); ip65 waterproof light fixture; reccessed mount with grommet; the inner miro-flex faceted reflector design provides increased light output with a contemporary appearance
- Bright lights with durable feature,great for replacing your old led tail lights or side; each individual diode has a round pearl-shaped reflector giving the light a clean,custom look and superior light distribution
- 6.3 inch oval red/white light serves as brake light,stop light,tail light, running light, backup light and reverse light: outer ring of leds comes with dual modes(high low beam) and function as tail brake lights; center clear/white leds act as backup and reverse light;
- Easy installation with high quality durable oval rubber grommet, hardwired with 4-wire connection system for ground, reverse, brake light and running light: black wire - ground / red wire - brake light / yellow wire - reverse light / white wire - running light/tail light
- Universal compatibility for vehicles equipped with dc12-24v power source supply, can be used in any truck, rv, trailers, trucks,camper, utes, utvs, boat, caravans etc.
SHOWview product -
Product Highlights
- Safe brake bleeder pump kit: our brake bleeding kit's components are tight fitting to prevent caustic brake fluid from leaking onto your vehicle’s parts; the brake bleeder bottle safely collects brake fluid for easy recycling or disposal
- Holds vacuum effectively: apply slow, even strokes on the vacuum hand pump to create pressure; pumps approximately 1 cubic inch per stroke of the vacuum pump bleeder; identify line leaks by examining how the hand operated vacuum pump holds pressure
- Vacuum brake bleeder: this precision-made vacuum tester automotive pump and brake bleed kit easily flushes your brake fluid; vacuum pump holds up to 25" (62cm) of mercury; the vacuum gauge is measured in inches and centimeters for easy reading
- Wide applications: easily diagnose vacuum and pressure-related systems, from the egr to brake bleeding to cooling systems on today's complex vehicles; use the vacuum bleeder on a variety of automotive fluid systems, windshield repair, and more
- Variety of adapters: this handheld vacuum pump comes with (2) near-universal bleed screw rubber cap adapters for effective brake bleeding; (8) tapered adapters; (2) 2 ft lengths of 1/4" tubing; cap the 4.5oz reservoir with a transfer or storage lid
SHOWview product -
Product Highlights
- Convenience: our 1l vacuum brake fluid bleeder features a convenient hanging hook and locking trigger that allows for hands free operation, so you won't need to rely on an extra set of hands while bleeding your brakes.
- Reliable | effective | efficient: users trust ares to be quality tools. you are backed by our performance assurance. if you have any issues with your ares 1l vacuum brake fluid bleeder, simply contact customer service for troubleshooting help, parts, replacement, or refund. need a manual? download it for free on our website!
- Item specifications: this 1l vacuum brake fluid bleeder uses a standard workshop air supply and features a working pressure of 71-113 psi with a maximum pressure of 113 psi.
- Transparency: the transparent drain hose allows you to visually inspect the old fluid during the draining process. you can easily flush your entire disc or drum brake system with this brake fluid bleeder!
- Aspca business ambassador: we are proud to be part of the aspca business ambassador program. if you have a pet, you realize they are more than a pet, they are part of the family. with your support, we’re proud to help this great organization.
SHOWview product
Coupon copied
