10 Best
Capacitance Testers
-
Product Highlights- 💖 using this theory, we can measure the capacitor is bad/ damaged or good in condition.
- 💖 dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed esr table for fast check.
- 💖 it is a series resistor inside capacitor, using 100khz to remove the impedance 1/(2*pi*f*c). the impedance become small, and we can then measure the true series resistor value.
- 💖 our esr meter only applies less than 15mv dc or peak to peak on a good capacitor, as a result we can use it as in circuit test.
- 💖 during repairing tv, lcd, audio board, etc. we can in circuit testing the capacitor is good or not.
SHOWview product -
Product Highlights
- Easy to carry: our meter is light weight and easy to carry, so you can carry it with you at any moment when you need to measure.
- Dc measurement: this meter can do dc measurement, so it can be used to determine the short circuit fault of electrolytic capacitors.
- Automatic adjustment: our meter can do automatic 0 adjustment at power on, and also do automatic 0 adjustment when switching between esr and dcr. the lcd displays the esr value and also the probe compensation value, so it is easy for users to adjust the 0 at the right time.
- High accuracy: our meter is made of abs material with exquisite craftsmanship and high accuracy, which can achieve long term use.
- Smart shutdown: this meter has a smart shutdown function, which will automatically shut down after about 5 minutes of your non operation, which will greatly extend the battery life.
SHOWview product -
-
Product Highlights
- 2.large lcd screen: the device is equipped with a large lcd screen that ensures easy reading of measurement results. the prominent display enhances user experience by providing clear and readable information.
- 4.compact and lightweight design: the capacitance meter features a compact and lightweight design, making it highly portable and easy to carry anywhere. its small size enhances convenience for users on the go.
- 1.high precise and low power consumption: this meter is designed for high precise in capacitance measurement while maintaining low power consumption. users can expect accurate readings without sacrificing energy efficiency.
- 3.wide measurement range: with a massive measurement range spanning from 0.1pf to 20000uf, the capacitor tester accommodates a broad spectrum of capacitance values. this versatility makes it suitable for a variety of professional capacitor applications.
- 5.brand new and high quality: the capacitance meter is offered as a brand new, high-quality product. this assurance of quality ensures that users receive a reliable and durable testing tool for professional capacitor applications.
SHOWview product -
Product Highlights
- [--] [backlight display] the voltage tester is designed with a backlight display that can show data clearly and accurately, so you can read it easily even in a dark place. the meter has the largest display of 6000 counts; the measuring dc voltage range is 0.8-700v; the measuring ac voltage range is 0.8-1000v; the capacitance range is 10nf-60mf.
- [--] [with led flashlight] the electrical tester has an led flashlight which is convenient to find the line in a dim environment and is beneficial to see the screen value. it can be used as a lighting fixture in an emergency. the multimeter is powered by 1x aaa battery (not included). please prepare the battery before using it.
- [--] [durable material] the digital multimeter is made of plastic and metal components, flame retardant and high temperature resistant, safe to use, strong and durable, wear-resistant and anti-fall, and can be used for a long time. you can use the multimeter with confidence without worrying about fire and electric shock.
- [--] [multifunctional meter] the digital multimeter has the function of measuring ac and dc voltage, resistance, capacitance, continuity, diode and frequency, live detection, and ncv detection. you can measure various parameters with only one tool, a good helper for troubleshooting, is more convenient.
- [--] [wide application] the electric tester is designed to measure the performance of electrical components or circuits, and it helps you accurately troubleshoot vehicle or internal electrical problems in a very short time, widely used in industry, lab, field, automotive repair and maintenance, shop, and household applications.
SHOWview product -
Product Highlights
- Large & clear lcd digital display: this amazing detector adopts 1.8" tft color lcd screen with high-resolution. besides, different parameter is shown with different color, convenient and simple for you to check the parameter.
- Battery powered: this monitor is powered by dc9v battery (not included).
- Wide application: this multifunctional capacitance meter can be used to test triode, field-effect tube(fet), diode, resistor, capacitor, inductor, mos, scr, which is available for various electric transistor testing.
- Automatical identification: drok intelligent transistor checker is able to detect npn and pnp transistors, n-channel and p-channel mosfet, diodes, thyristors, resistors, capacitors or other devices automatically.
- Auto shut-down function: our advanced electronic transistor tester owns auto shut-down function. there is shutdown countdown displayed on the monitor and the shutdown countdown time can be extended to 40s.
SHOWview product -
Product Highlights
- 【large backlit lcd display】 auto polarity display, easy to read large backlit lcd display, back-light makes a real difference in low light areas
- 【nice protective orange shell with stand built】 the case with our multimeter is some kind of non slip, slightly soft plastic that will help with drop protection, the stand places the device at a 45 degree angle and makes the screen easy to see hands free
- 【neoteck 2000 counts 8233d pro pocket digital multimeter】 2000μf capacitance and 200khz frequency measurement, accurately measures current, voltage, resistance, and more, maximum reading over time, auto-ranging and continuity buzzer
- 【ce rated digital mulimeter with over load protection】 designed to safely and accurately troubleshoot a variety of automotive and household electrical
- 【included 9v volt battery】the compartment lid at the back is secured by one cross head screw, not difficult to remove at all; also, included 2 x test leads and 2 x banana plug to alligator clip cable
SHOWview product -
Product Highlights
- [triple-mode alarm]: the mini circuit tester backlight flashes, lcd display analog bar and continuous beeping sounds when detecting ac voltage.
- [smart mode]: the smart digital multimeter can automatically test voltage, resistance, and continuity with the best resolution. with this digital voltmeter, you can solve electronic maintenance, industrial, vehicle and household electrical problems, etc.
- [red/green backlight]: the pocket ac voltage tester has a large lcd display, with red/green backlight, very easy to read.
- [pen type multimeter]: the low voltage tester also can be as a pen-type multimeter, it can accurately measure ac/dc voltage, resistance, continuity, capacitance, diode, v-alert and live wire.
- [upgraded flashlight]: the electrical voltage tester has a flashlight, which let you test efficiently and comfortably anywhere, indoors and outdoors, day and light.
SHOWview product -
Product Highlights
- Ma levelac/dc resolution: 100a 1ma high resolution, it can test small current, multi-function fast response.
- Small and exquisite: you can put it in your pocket for easy carrying.
- Multimeter function: it's not only a clamp meter, but also with multimeter function, you can test ac dc current/voltage, resistance, capacitance, diode.
- Ncv test: it with noncontact electric field measure if you want to measure whether there is ac voltage or electromagnetic filed, you can chose range.
- Vfc function: can reduce the interference of high-frequency signals on the measurement results.
SHOWview product -
Product Highlights
- 【multi-function】digtal backlit lcd display - led flashlight, temperature measurement for liquids and air conditioning ports, low battery indication, data hold, true-rms, zero, automatic range, sel fuction, auto power off after 10 minutes inactivity, non-contact ac voltage detection,full-range overload protection.
- 【ncv defection function】non-contact voltage (ncv) detector can easily and quickly determine whether there is a voltage.the ncv non-contact ac voltage detection function can be switched by short pressing the ncv button in any gear. powered by 2 x aaa 1.5v battery (batteries not included).
- 【true-rms high accuracy clamp meter】this digital clamp meter multimeter can accurately measure max 600a dc / ac current, 600v dc / ac voltage, resistance, capacitance, continuity, temperature, diode and frequency (hz).a perfect troubleshooting tool that will help you solve electrical problems in the car, industrial or at home quickly and safely.
- 【easy to read】the ac/dc clamp meter has a backlit screen and led flashlight so you can see the readings when working in dim or low-light conditions,like electrical closets, under buildings, behind appliances, and in other enclosed spaces,convenient led flashlight illuminates a dimly lit area. note: when the screen backlight and the flashlight is turned on at the same ti...
- 【safety first& customer service】 iec rated cat.iii 600v, ce and rohs certified, and it has overload protection on all ranges. double insulation protection. intendvision offers 36-month warranty and friendly customer service. if you have any questions, please contact us through amazon internal information. we attach great importance to the buyer experience and will solve...
SHOWview product
Coupon copied
