9 Best
Capri Tools Calipers
-
Product Highlights- These xzn/triple square bits are great for working with bmw, mercedes, vw, audi, porsche, and most other european vehicles
- Designed for breaker bars, torque wrenches and ratchets
- Drop-forged, heat-treated s2 steel bit set that will last longer than any others in its class
- Meets and exceeds ansi standards
- Sizes: 1/4-in: 4, 5, 6 mm - 3/8-in: 8, 9, 10 mm - 1/2-in: 12, 14, 16, 18 mm
SHOWview product -
Product Highlights
- 【firmly fixed 】- firm joint calipers use friction at the joint to hold the legs not move.
- 【ceramic measuring pottery tools set】 - the lightweight and nonslip design allows you to handle them with ease.
- 【wide application】 - a caliper set is great for you to measure the dimensions of an object, such as a sculpture, potter, clay, tube, hole, and so on.
- 【stainless steel caliper】 - the specially designed clay sculpture tool is for pottery clay sculpture measuring.
- 【practical tool set】 - a useful measurement transfer tool when working with round stock or shaped materials and then transferring that measurement to a ruler.
SHOWview product -
Product Highlights
- Dual direction: one for tightening and the other for loosening
- Ergonomic slip-resistant handle with double-layer hand protection protecting your hand from hammer strikes
- Turn simple hammer strikes into a powerful and consistent force to securely tighten or quickly loosen stubborn nuts and bolts, perfect for applications such as replacing brake calipers
- All steel go-through construction transfers striking force efficiently onto the fastener
SHOWview product -
Product Highlights
- 4 in 1 tool fits your vehicle: disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads; use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool; this versatile caliper piston compressor tool is ...
- Easily reset your brake calipers and pistons: drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly; retract brake caliper press plates to fit inside the caliper cavity; begin ratcheting slowly and steadily until the pistons have retracted completely; retract compression plates to re...
- Brake caliper piston tool: use the abn ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers; disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; it is suggested t...
- Ratcheting action: brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; reverse tool ...
- Built to last: constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability; thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency; brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates; larger plate...
SHOWview product -
Product Highlights
- 📐how to use: center the pistons on both sides of the push plate so that both sides of the push plate are stressed at the same time (press both sides to assist in starting until the push plate presses the piston), swing the handle until the push plate presses the piston to the appropriate position, and finally adjust switch and retract the push plate to remove the spreader.
- 📢size reference: two sets of push plate sizes: 7.01x2.36 inches and 4.53x2.17 inches; telescopic range: fully retracted: 1.88”, fully extended: 3.03”. please allow slight size differences due to manual measurement differences.
- 🔧function: the disc brake pad expander tool easily resets your brake calipers and pistons, compressing and aligning the pistons to provide enough space for new pads and other braking work
- 🔨quick and effective: ratchet technology enables 360-degree full swing, allowing the spreader to be placed in any position. the extended reversing lever allows for easy changes from deployment to retraction.
- 🔎high quality: made of high-quality #steel material, high strength and durable. economical and practical, long service life. comfortable to hold.
SHOWview product -
Product Highlights
- 【wide application】-- brake caliper press ratchet applicable to all kinds of single, double and four piston calipers.360 degree ratchet swing is allowed at any angle.easy to install, easy to remove. suitable for most large trucks and commercial vehicles
- 【size】--brake caliper: two groups of push boards: 2-3/8" to 4-5/8" and 2-3/8" to 7". brake caliper hangers: total length: 19.7cm/7.7inch
- 【function】-- disc brake piston expander provides space for installation of new brake pads; with two groups of push boards for single,double and four piston calipers.come with 4pcs brake caliper hanger fits for a variety of automotive work.
- 【material】-- solid steel
- 【package】-- 1pcs brake piston caliper, 4pcs brake caliper hanger
SHOWview product -
Product Highlights
- A money-saving tool: save hundreds of dollars on brake pad replacements
- Durable: designed for repeated use with high quality materials
- Ideal for mechanics: 12-piece pad and caliper wind back set to replace brake pads and rotate pistons back into the caliper
- Universal design: fits most makes of vehicles of domestic, european, japanese and other vehicles
- Includes case: includes a hard plastic impact resistant case for carrying and easy storage
SHOWview product -
Product Highlights
- Convenient disk brake spreader tool: work in tight areas where c-clamps can’t and easy on the hand unlike channellocks; our brake spreader tool features a large knob that is easily torqued to compress the caliper piston on your braking system
- Durable design: made with high carbon steel and corrosion resistant chrome vanadium steel; the brake piston tool's fine-threaded driver, compression plate, and foot on our caliper piston compressor tool won’t break or bend while resetting the caliper piston
- Ideal brake pad tools: get a safe and accurate caliper piston compression with our caliper reset tool; compress inner brake pads and reset pistons on domestic cars, as well as import cars and light trucks with our disk brake spreader
- Fast and easy: compressing inner brake pads and resetting pistons for pad replacement is much more efficient with our brake piston compressor tool; replace brake pads in no time with our brake pad spreader tool's maximum threaded length of 3-1/2”
- Reset caliper pistons: great for single or dual caliper pistons; our disc pad spreader can compress your caliper piston for brake pad removal and replacement easily; compress dual pistons one at a time evenly with our inner brake pads spreader
SHOWview product -
Product Highlights
- Made of superior-quality carbon steel mixed with chrome vanadium steel for optimal durability. features heavy duty center screw and pressure plate for extended use.
- Hand tighten with built-in comfort knob or use a socket wrench with a 10 mm socket adapter.
- Use this disc brake pad spreader to quickly and easily compress or push the brake caliper pistons back into place when replacing brake pads.
- The solid steel swivel joint(29.9mm) at the tip enables you to apply even and precise compression force for a faster and easier job.
- For installing pads on most domestic and import cars and light trucks.
SHOWview product
Coupon copied
