10 Best
Clamp Ammeters
-
Product Highlights- [infrared thermometer]: the digital clamp multimeter can also be used as infrared temperature gun. perfect for checking the heating status of high-voltage terminals, which could judge the wire connection status, such as power distribution box, electricity room.
- [rechargeable batteries]: the digital multimeter tester comes with rechargeable batteries, you will never about power problem. it also support 2 alkaline batteries.
- [current & voltage both measurement]: the dc ac clamp ammeter can check both current and voltage measurements at the same time when troubleshooting motors, pumps, or other equipment.
- [vfc function]: smart digital voltmeter with vfc function, which can measure the output voltage or current of inverters and motors.
- [open jaw design]: digital multimeter tester with fork type design for easy and accurate current measurement where a standard clamp can't close. especially for reaching into a tight or narrow space.
SHOWview product -
Product Highlights
- Conform to the iec-61010-1, iec-61010-2-030, iec-61010-2-032, iec-61010-2-033 standards.
- Measure frequency, temperature, resistance, continuity and capacitance.
- Dual line display can show both ac voltage/current and frequency or celsius and fahrenheit on the screen.
- Auto range, auto power off, data hold, low battery indication with backlight.
- Low impedance (loz) mode for identifying and eliminating ghost or stray voltages.
SHOWview product -
Product Highlights
- Easy to use: connect the 4 mm plug to a multimeter with mv ac function and the a ac measured value is displayed as a mv ac reading
- Batteries: powered by 2 x 1.5 v aaa batteries (included) with power led and status indicator
- Safety: en-61010-1; cat iii 1000v / cat iv 600v
- Practical flex current pliers: suitable for cable diameters of up to max. 160 mm
- Conversion factors: 30a = 100mv/a; 300a = 10mv/a; 3000a = 1mv/a
- Frequency range and accuracy: true rms 50 - 400 hz; +/- 3% + 3mv
SHOWview product -
Product Highlights
- 4. jaw opening: 28mm 5. 600v dc ac voltage measurement 6. 600a ac current measurement 7. temperature measurement
- 11. low pass filter measurement (ut202bt only) 12. bright backlight / flashlight 13. non-contact voltage (ncv) 14. cat iii 600v
- Key features: 1. button-design current clamp meter 2. one-handed operation and easy to use 3. 9999 counts
- 8. dual display: v+hz and a+hz 9. bluetooth 5.0 (ut202bt only) 10. inrush current measurement (ut202bt only)
SHOWview product -
Product Highlights
- Multimeter--can provide convenience for circuit board and electrical maintenance, and help you perform your work better.
- Testing multimeter--easy to operate, can better help you save time and energy, digital display screen, easy to read.
- Handy clamp meter--lightweight and compact size, easy to carry and store, with enough testing tools to use.
- Digital clamp meter--the clamp multimeter will automatically shut down when not in use within 15 minutes after it is turned on.
- Clamp multimeter--designed with flashlight, even in the dark environment can clearly see the measurement location.
SHOWview product -
Product Highlights
- Digital clamp ammeter: lightweight and compact size, easy to carry and store, with enough testing tools to use.
- Handy clamp meter: suitable for line continuity test, diode test, capacitance test, temperature test, frequency test, etc.
- Volt meters and: suitable for measuring ac voltage, dc voltage, current, resistance, capacitance, diode, etc.
- Current tester: high-definition display screen for reading the data, clear handwriting and can keep the data.
- Clamp multimeter: the clamp multimeter will automatically shut down when not in use within 15 minutes after it is turned on.
SHOWview product -
Product Highlights
- [0.1ma ac resolution]: delivers 0.1ma ac resolution and sensitivity.
- [dual line display]: dual line display can show both ac voltage/current and frequency on the screen.
- [low current test]: the latest clamp meter engineered by bside, now more steady and accurate when test low current, especially super low current.
- [1ma resolution]: delivers 1ma resolution and sensitivity, which make it a great a tool for measuring such as parasitic draws.
- [back clip]: back clip make it more portable, hang on your belt or pocket.
SHOWview product -
Product Highlights
- ⚡【remote display via bluetooth】：scan the qr code and download the app first.the wireless bluetooth digital clamp multi-tester will auto connect with your smart phone in the ailink app(within 15m).which convenient for you to monitor,log and analyze the max/min/current of volt amp ohm in real time.
- ⚡【easy to operation】：the true-rms voltmeter ammeter with large backlight display,you can read and record the value easily in darkness.feature with data hold,low battery indication,auto range function.press “rel” will show the relative testing and zeroing the clamp tester to obtain more accurate measurement.
- ⚡【ac/dc clamp meter】: the highly sensitive ac dc volt amp clamp multimeter feature with trms 6000 counts auto-ranging, be able to accurately measure ac/dc voltage,ac/dc current to 1000a,resistance,capacitance,diode,temperature(℃/℉),hz,continuity buzzer test,etc.
- ⚡【safety & protection】：the amperage meter with rubber sheeve to protect your volt meter from being broken by fallen. overload protection is up to standard of catⅱ1000v or catⅲ600v in all range.non-contact voltage(ncv) function can detect voltage without touching any wires and avoid electric shock .
- ⚡【accurate current meter】the ac dc current measurement（600a/1000a）has high resolution of up to 1a.when you test ac current,you must separate the live wire,otherwise the degree will always be zero.infurider provide 365-day quality guarantee and lifetime tech support.welcome to contact us if you have any question with the product.
SHOWview product -
Product Highlights
- ✅ data hold: hold the measured data for conveniently checking or observing data.
- ✅ 28mm jaw opening: jaw opening of 28mm to measure current without touching or interrupting the circuit.
- ✅ multifunctional clamp meter: can be used to measure ac current, ac/dc voltage, resistance, tance, relative value, max/min value, frequency/duty cycle, live test, continuity test, and diode test.
- ✅ measuring range: 600a ac current, 600v ac/dc voltage, 60mω resistance, 60mf tance, 10hz~10mhz frequency, and -40~1000℃ temperature.
- ✅ backlight function: 1.6-inch lcd screen with backlight on/off switchable for display data clearly.
SHOWview product -
Product Highlights
- 📌【auto range digital clamp meter】this trms digital clamp meter can accurately measure ac and dc current up to 1000a with 0.1a sensitivity by clip-on clamp. the auto-ranging clamp meter can also measure ac and dc voltage, resistance, capacitance, frequency, temperature, diode and continuity test, etc.
- 📌【high precision clamp ammeter】the clamp ammeter has high resolution up to 1a, you can use the clamp meter to measure dc and ac current. the hp-570t-app ammeter can be used to check battery chargers, solar panels, inverters and auto mechanics etc. easy to use and perfect for safely resolving your automotive or electrical issues.
- 📌【bluetooth clamp ammeter】install the "intelligent meter" app on your mobile phone/tablet to connect easily and automatically. the app displays volts amperes ohms measurements on a current clamp meter. in addition to continuously monitoring readings using bluetooth functionality, you can log data at programmable intervals, export data and graphs.
- 📌【multifunctional ac dc ammeter】voltmeter current clamp has multiple functions. this ac/dc current clamp meter has a large lcd backlit display for easy reading even in the dark; data hold function; low battery indication; temperature measurement (°c/°f); high and low voltage alarm settings; data is zeroed for accurate readings.
- 📌【ac current measurement & safety first】you cannot use the ac clamp on any meter to bypass the entire wire, but you must bypass one of the 3 wires inside. otherwise, the ac ammeter will show a reading of zero amps. this clamp current ammeter conforms to the safety standard cat ⅱ 1000v or cat ⅲ 600v, and the full range has overload protection. aftersale service provided.
SHOWview product
Coupon copied
