10 Best
Digital Thermostats
-
Product Highlights- 【m2 tc+timer mode for day night temperature control】 this mode is used for different temperature control for two periods of the day. if you want to keep the temperature of the reptile terrarium at 22~25 degrees from 10:00 to 17:00, and 22~26 degrees from 17:00 to 10:00 the next day, this kt3200pro thermostat timer plug outlet is exactly what you need.
- 【m3 timer mode】 this mode is used to turn on and off the device in two time periods of 24 hours. for example, if you only want to turn on the heater from 19:00 to 22:00, and turn it off at other times, this kt3200pro thermostat plug with day night timer can help you, just set time 1 on=19:00, time 2 off=22:00.
- 【high performance】 plug-and-play design, large lcd screen with wide viewing angle for easy reading. 3 modes are available: m1 temperature control mode, m2 temperature control with timer mode and m3 timer mode. temperature control range:-40℃~120℃/-40℉~248℉. time set: 0-24h/daily cycle.
- 【m1 tc mode for temperature control】 this mode is used for temperature control without time period. just set start temperature and stop temperature, this temperature controller plug will work in heating or cooling mode as programmed. (start temperature > stop temperature, cooling; start temperature < stop temperature, heating).
- 【more features】 3m ntc 10k temperature sensor probe. temperature calibration. reset function. all settings will be saved after power failure (clock data will be saved for 2 weeks, other settings can be saved permanently). this thermostat timer plug socket can be used for greenhouse, reptile, incubator, freezer, refrigerator, heater, homebrew, fermentation, and other areas.
SHOWview product -
Product Highlights
- ※[dual relay output] dual relay output, which can connect heating and cooling device at the same time.
- ※[convenient design] plug-n-play, easy to use. support ℃/℉reading and temperature calibration.
- ※[wifi & app] wifi smart controller supports both ios & android，wifi supports 2.4ghz wi-fi router, free app “inkbirdsmart” which is able to monitor temperature at any time.
- ※[alarm for safe] high/low temperature limit setting alarm.
- ※[long warranty] the controller itself has 2 years warranty while the temperature sensor has 1 year warranty. maximum output load: 2200(220v)2400w(240v).
SHOWview product -
Product Highlights
- Anywhere & anytime smart - control the temperature of your home from anywhere and anytime with the kasa smart app. set schedules to automate your heating that suits your daily routines.
- Room-by-room comfort - adjust the perfect temperature in each room individually. save your preferred scenario for further use.
- Ultra-long standby time - uses energy-saving wireless technologies that promise longer battery life.
- Smart heating and compatibility: this starter kit is suitable for getting started with the smart control of your heating system. you can also buy ke100 to extend it to more rooms. fits most existing radiator valves (m30 x 1.5mm) with 3 supplied adapters to maximise compatibility.
- One for all - each hub can connect and control up to 32 radiators, with the kasa app you can summarise and control all radiators. all rooms under control
- Easy installation - simply replace your old radiator valve with kasa and follow the step-by-step instructions in the app for installation. you can do all this yourself without any difficulty.
SHOWview product -
Product Highlights
- 【temperature control function】 temperature control range:-40℃~120℃, temperature control accuracy: ±1%. this digital temperature controller plug is easy to program. set start temperature and stop temperature, it will work in heating or cooling mode as programmed. (start temperature > stop temperature, cooling; start temperature < stop temperature, heating). this thermost...
- 【more functions】 ntc 10k temperature sensor probe. large lcd display without backlight. temperature calibration. reset function. data storage function that all parameters set can be saved after power off.
- 【relay output】 plug-and-play design, relay output. easy to program and safe to use. this thermostat plug outlet can be displayed in celsius or fahrenheit. temperature control range:-40℃~120℃/-72℉~176℉. power supply: 100~250v ac 50/60hz. output: max 16a
- 【timing function】 f01~f04 modes for cycle timing and countdown: f01 cycle timer mode; f02 countdown on mode, f03 countdown off mode, f04 countdown on and countdown off mode. you can choose f01 mode to control the device to work in cycles, or choose f02~f04 modes to countdown to turn on or turn off the device. set range: 0~99 hours 59 minutes. please note that this therm...
- 【wide range of application】this temperature controller thermostat plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. it can also be used as a timer for cycle timing and countdown.
SHOWview product -
Product Highlights
- 🌻【dual relay output]】dual relay output, which can connect heating and cooling device at the same time.
- 🌻【convenient design】plug-n-play, easy to use. support ℃/℉reading and temperature calibration.
- 🌻【wifi & app】wifi smart controller supports both android & ios（applicable to ios13 and above），wifi supports 2.4ghz wi-fi router, free app “inkbirdsmart” which is able to monitor
- 🌻【alarm for safe】high/low temperature limit setting alarm.
- 🌻【long warranty】the controller itself has 2 years warranty while the temperature sensor has 1 year warranty. maximum output load: 2200w/2400w(220/240v).
SHOWview product -
Product Highlights
- 【easy to program】 just set start temperature and stop temperature, this plug in thermostat will work in heating or cooling mode. temperature control range:-40℃~120℃(-40℉~248℉), temperature control accuracy: ±1%. celsius and fahrenheit can be converted. this digital temeprature controller also supports temperature calibration if needed.
- 【timing function】 f01 cycle timer mode; f02 countdown on mode, f03 countdown off mode, f04 countdown on and countdown off mode. set range: 0~99 hours 59 minutes. please note that temperature control function and timing function cannot be used at the same time.
- 【easy to use】 plug-and-play design, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed.supports °c/°f display; relay output
- 【dual display window】displays measured temperature and set temperature at the same time.temperature calibration. reset function. data storage function that all parameters set can be saved after power off.
- 【wide range of application】this temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. it can also be used as a timer for cycle timing and countdown.
SHOWview product -
Product Highlights
- [easy installation & operation]-no installation or wiring, easy plug and play unit. temperature control range:40℉~248℉(-40℃~120℃), accurate temperature control of ±1℃ for consistent comfort. choice of ℉ or ℃ temperature display on lcd.
- [timing function]- f01 cycle timer mode; f02 countdown on mode, f03 countdown off mode, f04 countdown on and countdown off mode. you can choose f01 mode to control the device to work in cycles, or choose f02~f04 modes to countdown to turn on or turn off the device. set range: 0~99 hours 59 minutes. please note that temperature control function and timing function cannot...
- [smart thermostat]-heating & cooling mode, 1.7m ntc 10k temprature sensor probe, automatically turn on/off heating devices or cooling devices through your preset target temperature. maintains stable room temperature and provides comfort and energy saving.
- [wide effiective application]- digital thermostat suitable for most heating & cooling devices, such as greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew.it can also be used as a timer for cycle timing and countdown.
SHOWview product -
Product Highlights
- 5-2 day programmable - set different schedules for weekdays and weekends
- Precise temperature control of plus/minus 1 degree f
- Easy-to-read display with backlight
- Compatible with single-stage heating, cooling and heat pump (without aux) systems
- Battery-powered for maximum compatibility - two aaa batteries included for your convenience
SHOWview product -
Product Highlights
- Precise temperature control: precise temperature control of +/- 1 degree fahrenheit
- Easy installation: easy to install yourself and basic operation keeps programming simple
- Set point retention: set point is retained in memory in the event of a power outage
- Override options: permanent and temporary override capability
- Does not work with electric baseboard heat (120-240 v), heat pumps with backup, or multi-stage heating/cooling
- One week programming: set one program for the entire week with four program periods per day including wake, leave, arrive and sleep
SHOWview product -
Product Highlights
- Backlit display shows current room temperature and set point temperature simultaneously
- Auto change from heat to cool
- Straight forward display and basic buttons keep operation simple
- +/- 1 f temperature control
- Includes change reminders for low batteries.program is retained in memory in the event of a power outage.requires 2 aa batteries (not included).includes uwp mounting system, mounting hardware and quick install guide
SHOWview product
Coupon copied
