4 Best
E Bike Torque Sensors
-
Product Highlights- Power: the controller for 36v or 48v batteries offers a rated power of 500w at 9a. the maximum current is 11a with a maximum peak power of 500w. the power at the light output is 3 w (100 ma, voltage corresponds to battery voltage).
- Connections: our torque professional controller has two connectors for lights with an output voltage of 36v, three connections for the motor, one port for the thumb gas, two connections for the battery (+ and -), a port for the display, a port for hall sensor and speed sensor, two connectors for the brake and a connector for pas (pedal assist systems).
- Function: this device is a controller with dual mode trapezoidal commutation to control all the functions of your e-bike. the controller switches devices such as the motor and the lights on/off, and the information from the pas sensor, brake sensors and hall sensor is processed and transmitted to the display. the controller can be perfectly attached to the bike using th...
- Compatibility: the control unit is also functional with all standard windmeile motors with or without hall sensor. the controller has been specially designed for compatibility with our 500w bafang motors. if the hall sensor of your engine is defective, the controller still works, only starting is slightly less round. the controller must be used with kt series display. t...
- Accessories: for easy installation and best compatibility, we recommend matching accessories, such as our controller box to protect against environmental influences and the perfect attachment of the controller to the bike, or the thumb throttle from windmeile, can be found either in the amazon store or on our website with ideal advice and instructions on our products, f...
SHOWview product -
Product Highlights
- Power: the controller for 36 v batteries offers a rated power of 250 w at 7 a. the maximum current is 14a. not compatible with 500 w bafang motors, operation of these motors with this 500 w kt controller is at your own risk and under the exclusion of any liability/warranty claims. a compatible controller for 500 w bafang motors with lower current can be found in our shop.
- Connections: our torque waterproof controller has two ports for lights, a connector for the motor, a connector for the thumb throttle, two connections for the battery (+ and -), a connector for pas (pedal assist systems) and a connector for the 1t4 wiring harness, for connecting the brake sensors, throttle grip and display.
- Function: this device is a controller with dual mode trapezoidal commutation to control all the functions of your e-bike. the controller switches devices such as the motor and the lights on/off, and the information from the pas sensor, brake sensors and hall sensor is processed and transmitted to the display. the controller can be perfectly attached to the bike using th...
- Compatibility: the control unit is also functional with all standard windmeile motors with or without hall sensor. if the hall sensor of your engine is defective, the controller still works, only starting is slightly less round. the controller must be used with a kt series display. the compatible displays can be found in our store. dimensions: 94 x 49 x 29 mm.
- Accessories: for easy installation and best compatibility, we recommend matching accessories, such as our 1t4 wiring harness or our kt displays, either in the amazon store or on our website with ideal advice and instructions on our products, for your special e-bike or pedelec experience.
SHOWview product -
Product Highlights
- Power: the controller for 48v batteries offers a rated power of 1000w at 13a. the maximum current is 26a. the power at the light output is 3 w (100 ma, voltage corresponds to battery voltage).
- Connections: our torque professional controller has two connectors for lights with an output voltage of 36v, three connections for the motor, one port for the thumb gas, two connections for the battery (+ and -), a port for the display, a port for hall sensor and speed sensor, two connectors for the brake and a connector for pas (pedal assist systems).
- Function: this controller with dual mode trapezoidal commutation from windmeile is a device for controlling all the functions of your e-bike or pedelec. the controller switches devices such as the motor and lights on/off, and the information from the pas sensor, brake sensors, hall sensor and thumb gas are processed and sent to the display. the controller can be perfect...
- Compatibility: the control unit is also functional with all standard windmeile motors with or without hall sensor. if the hall sensor of your engine is defective, the controller still works, only starting is slightly less round. the controller must be used with a kt series display. the compatible displays can be found in our store. dimensions: 191 x 83 x 42 mm.
- Accessories: for easy installation and best compatibility, we recommend matching accessories, such as our controller box to protect against environmental influences and secure attachment of the controller to the bike, or the thumb throttle from windmeile, can be found either in the amazon store or on our website with ideal advice and instructions on our products, for yo...
SHOWview product -
Product Highlights
- Compatibility the chainring is designed for the sr pa01.32.st1601. it is compatible with 3/32 inch chains.
- Accessories: for easy installation and best compatibility, we recommend matching accessories, such as bafang controllers or motors at windmile, either in the amazon store or on our website with detailed advice and instructions on all products, for your special e-bike or pedelec experience.
- Function: the bafang chainring sr pa01.32.st1601 is installed in combination with the torque sensor sr pa211.32.st. the normal chainrings are not compatible. the chainring has 44 teeth and a 68.5 mm chain line. it is made of spcc steel, this steel is particularly hard and resistant due to the cold rolling process. the spider is made of aluminium 6061 to keep the weight ...
- Installation: the chainring is pushed onto the crank axis of the sensor. after that, the fixing nut must be pushed on and tightened using the tl-un65 or tl-un66 and 35 nm. the tl-un66 is available in our shop.
SHOWview product
Coupon copied
