10 Best
Engine Oil Extractors
-
Product Highlights- 【easy installation】: first connect the hose's inlet and outlet to the oil inlet and outlet, and then connect the power clip with a red positive link and a black negative link to the car battery. clamp the conductive clip, and press the button again. the operation of the oil transfer pump is very simple, and you can run your engine smoothly by yourself.
- 【full accessories】: the set of motor oil diesel fluid transfer pump contains an 8 x 7 x 4 inch, 1 pound oil change pump along with the following accessories: a 1.5 meter outlet hose, a 1.2 meter inlet hose, 2 hose locks, and 2 battery clamps.
- 【efficient equipment】: this 12v, 8 "l x 7" w x 4 "h oil pump has a powerful force of 60w. drawing 5a of current, its motor delivers 0.8-1.0 liters/min flow rate while operating steadily and silently. it’s very portable and can be used anywhere without location limits, empowering convenient oil changes wherever desired.
- 【usage guide】: before using the oil pump extractor, you need to start the motor to warm the oil to 104°f-140°f. then shut down the motor before pumping. it cannot be used for gasoline/petrol, water, gearbox oil, or flammable liquids (fuel, gasoline, etc.). before use, please pay attention to whether the inlet and outlet directions correspond correctly to the hoses and p...
- 【wide application】:this 12v transfer change oil pump doesn’t have complex workflows, and can easily remove oil scavenged in the tube from cars, motorcycles, rvs, boats,trucks, quad bikes, and lawn equipment at any time. it is also an excellent choice for changing the oil in scooters, ships, marine trucks, tractors, truck forklifts ,and more.
SHOWview product -
Product Highlights
- 【buy with comfidence】from the purchase of for raw materials to the factory inspection of products, we will conduct inspections at each stage, buy with confidence.
- 【excellent performance】 the oil pump is used for oil extraction. this oil change equipment is perfect and the efficiency is high. the extraction can be completed by one person. it is equipped with 3 thick hoses, and the entire extraction process can be clearly seen. it is a practical and safe tool.
- 【vevitts 100w oil extractor pump】lightweight and portable-compact size for easy storage anywhere and transport.
- 【high-quality materials】 vevitts oil extractor pump is made of high-quality aluminum alloy and plastic pipes, which is corrosion-resistant, durable, wear-resistant, corrosion-resistant, and durable.
- 【easy to use】 oil fluid extractor is easy to install, easy to use, small in size, light and portable, easy to store and carry to any place you want. no special tools required, needn't warm engine oil up. just fix the two clips on the battery power supply, connect 2 inlet hoses(6mm,8mm) by adapter, fix outlet hose(10mm) on the outlet by yellow clamp, and turn the power on.
SHOWview product -
Product Highlights
- 【installation steps】step 1:inlet tube connect to the pump by straight push connectors and outlet tube connect to the pump and fix it with clamp丨step 2:pump connect to the power by battery jumper cable clamps丨 step 3:insert the inlet tube into oil tank, and insert the outlet tube into the waste oil bucket丨step 4:push the on/off switch,let the pump start working
- 【widely application】this product suit for motorcycles，atv，trucks，car，rv，boat and lawn mowers etc.
- 【high quality and professional performance】made of pure copper motor with aluminum housing,it is durable and stable. 2 size（6mm,8mm）inlet tube for choice.100w self-priming pump provide 1-4l（0.26-1.05 gal)/min flow.
- 【package include】1x oil change pump丨1x 6mmx800mm inlet pu tube丨1x 8mmx100mm inlet pu tube丨 1x 10mmx1000mm outlet pu tube丨2x screws丨2x straight push connectors丨1x clamp丨1x instruction
- 【warranty】for any reason, if you are not satisfied with your purchase, contact us directly. we offer a 6-month warranty, 100% satisfaction guarantee.
SHOWview product -
Product Highlights
- Easy to set up; simple, convenient and easy to use. lightweight and portable-compact size for easy storage anywhere and transport
- Simple connection-two battery clamps directly attached to battery source, and no need specialized tools
- 12v, 100w nuzamas oil pump, comes with inlet and outlet tube, ready to use
- Clean and fast-two clear thicker and flexible hoses can keep looking at the fluid extraction process
- Can be used as a fuel supply device for field-working vehicles like engineering vehicles, excavators, bulldozers, road rollers, cement mixers, lifters, trucks, fuel compressors, mining machinery and farming machinery. also ideal for filling or emptying diesel and oil storage tanks.
SHOWview product -
Product Highlights
- 【safe operation】- except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. before use, be sure to heat the car engine to 104 ° f-140 ° f, avoid clogging the oil pump due to oil solidification.
- 【accessories & precautions】- the oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*oil-proof gloves, 2*battery clips, 1*user's manual. please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. the suction power of the micro suction pump is limited. please do not connect other extension tu...
- If the oil cannot be pumped after the oil change pump is started, please do not start it all the time to prevent overheating from damaging the oil change pump. please use the product according to the instructions
- 【engine oil change made easy】 - dc 12v 100w has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.7l / m, oil flow 0.35l / m).
- 【warning】: this product is not suitable for gasoline/petrol. do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc) if there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result.
SHOWview product -
Product Highlights
- Specifications: fluid temperature range: 35°f- 200°f/1°- 95°c; polypropylene hose diameter: 4mm / 6mm / 8mm / 10mm (0.157"/0.236"/0.315"/0.393"); tank capacity: 7l; actual capacity 6.5l; working pressure: 70-170 psi.
- Wide application: the 7 liter oil extractor is constructed from composite materials and suitable for the extraction of all types of engine and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. the oil extractor pump is also suitable for low viscosity fluids such as water.
- Complete fluid extraction solution: the vacuum fluid extractor is equipped with four tubes of varying diameters that can easily reach the bottom of the oil pan. this versatile fluid extractor allows for the efficient removal of fluids ranging from engine oil to brake fluids. with its generous 7l reservoir and additional hoses, you can effectively access the deepest part...
- Easy operation: simplify the process of changing engine oil and transmission fluid with the convenience of the oil extractor. simply open the hook, insert a suitable hose into the oil pan, and let the oil extractor pump do the work for you. not limited to places, change oil anytime, anywhere.
- Package included: 1 x 7l oil extractor 1 x φ10mm nylon hose 1 x φ8mm nylon hose 1 x φ6mm nylon hose 1 x φ4mm nylon hose 1 x instruction manual. note: if you think the length of the hose is too short, these 4 hoses can be connected to each other and used together, wrapped with tape to avoid leakage.
SHOWview product -
Product Highlights
- 【easy installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. this process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- 【package included】: 1 x pump; 1 x outlet hose; 1 x inlet hose; 4 x hose clamps; 2 x battery clamps
- 【specificaiton】: input voltage: dc 12v; wattage: 60w; current: 5a;motor oil (40-60 degrees) flow rate: approx. 1l / min
- 【 ideal equipment for 】: extracting motor oil from your vehicle without mess & specialised tools extract the oil from your car, motorcyle, scooter, quad bike, truck, boat, forklift, generator, tractor, ride on mower etc siphon & transfer diesel to cars, trucks, ships, boats, tractors, farm machinery, plant equipment etc.
- 【warning】: this product is not suitable for gasoline/petrol. do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
SHOWview product -
Product Highlights
- 【pneumatic fluid extractor】this tool serves as an automotive car fluid pneumatic filler and automotive transmission oil filler, making it a versatile addition to your automotive tools, essential tool for vehicle maintenance.
- 【wide application】ideal for use in workshop production lines, oil change centers, steel factories, automotive manufacturing, wheel bearings, 4s shops, auto repair factories, and auto beauty automatic engine manufacturers.
- 【5l large capacity】 5l gear oil filler tank providing ample space for storing oil, reducing the need for frequent refills, practical vehicle transmission transfer gear oil fluid air pump tool. soft hose with pressure gauge, easy to use.
- 【easy to use】equipped with a funnel device, this product ensures a clean and convenient oil filling process. it allows for immediate stop and use, offering a clean and quick solution.
- 【versatility】automatic transmission fluid refill system provides an efficient and convenient solution for automatic transmission fluid, transmission fluid, gear oil refilling and changing. also suitable for heavy machinery lubrication, automotive engine oil, thin oil water, and other liquids.
SHOWview product -
Product Highlights
- 4x fluid extractor hoses: the manual fluid extractor comes with four suction hoses to change different sizes for various conditions. along with the adapter, the hose can reach the very bottom of the reservoir and suck up every drop of motor oil.
- Wide application: the fluid extractor is widely used to extract the engine oil, brake fluid, atf fluid, and other non-corrosive and non-thick fluid of motorcycles and vehicles. it is perfect for working on cars in the garage or automobile repair shops.
- 9l oil extractor: the manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. its capacity can reach 9l, which allows you to store more oil and avoid frequent recycling waste oil.
- Easy to use: you can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan. with the oil extractor pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward.
- Specificaiton: color: white; fluid extractor capacity: 9 liters; fluid temperature range: 35°f- 200°f/1°- 95°c; polypropylene hose diameter: 4mm / 6mm / 8mm (0.157"/0.236"/0.315"); tank capacity: 9l; working pressure: 70-170 psi
SHOWview product
Coupon copied
