10 Best
Externally Threaded Inserts
-
Product Highlights- - all in 1 box with large quality, total 240 pcs from m4 to m10 sizes in different length, suiting your different purposes
- - higher torque & clamping force, the hex socket means the screw has six stress-bearing sides, it allows you to use fewer socket screws than you'd have to install if using other traditional screws
- - nuzamas 240 pieces zinc alloy screw-in type hex drive threaded insert nuts assortment. durable & reliable, made by high quality grade 4.8 carbon steel with zinc plating resistance to rust or corrosion, the zinc plating is increasing the life-span of the underlying metal, suitable for long time uses
- - come with clear plastic storage box, it’s a harder plastic, and the nuts can be classified correctly, and easy to storage without mess
- - wide range of uses, it is suitable for various fastening fields, widely use in the assembly of electric mechanical and light industrial products such as automobiles, elevators, switches, instruments, furniture and decoration etc.
SHOWview product -
Product Highlights
- Easy to operate they are multi-purpose threaded insert nuts, which you can easily drive with them, easy to use.
- Assorted kit: there are 6 different sizes insert nuts (please see the detail size in the description or the photos), so you can handle your project for free.
- Great quality: these insert nuts are made of galvanised carbon steel, which provides high strength and provides good corrosion resistance in many environments.
- Feature: press-in nuts are advantageous over cylinder nuts and t-grooves because they can be installed from one side of the workpiece.
- Note: the pre-drilled hole must be as deep as the length of the press-in nut plus a part of the bolt that can be screwed over the end of the nut in the workpiece
SHOWview product -
Product Highlights
- 💯 38pcs carbon steel black hex drive socket cap bolts ---- including 6 sizes: m6x30mm; m6x50mm; m6x70mm. every barrel bolt is precision mechanical thread, made of high-quality carbon steel material, black powder coating, anti-rust. those have the performance of high hardness and good toughness, the screw thread is clear and not easy to loose. which make the kit more stu...
- 💯 20pcs t nuts 4 pronged tee blind nuts ------ the t nuts made from high quality black zinc, surface is zinc-plated for good rust resistance and good performance. t nut use on sheet metal and wood; for household appliances, office equipment, toys, electrical aappliances, furniture, etc.
- 💯 what you get ------ in this kit, you will get 38pcs carbon steel black hex drive socket cap bolts with 1pcs allen wrench, including m6x30mm: 15pcs; m6x50mm: 15pcs; m6x70mm: 8pcs. m6x15mm threaded inserts: 25pcs; m6x10mm t nuts: 20pcs; m6 flat washers: 38pcs; allen wrench: 1pcs; storagre box: 1pcs. intotal 123pcs can meet all your needs.
- 💯 25pcs inserts nut assortment kit ------ threaded inserts for wood are used for pre-embedded connectors for wood furniture. standard hex socket head, smooth & flat, features flanged thread texture, stable structure and easy installation.
- 💯 38pcs black zinc plated flat washers -------- flat washers are commonly used to prevent nuts from loosening. our flat washers are well made, with smooth and shiny surface, highly compatible with screws, nuts and bolts of same sizes and feature solid bearing surface to prevent nut/bolt head from tearing through material.
SHOWview product -
Product Highlights
- Install with standard tools – c12l14 carbon steel threaded inserts. install with standard tools. no special drills, taps, or special installation tools are needed.
- For use with applications – the threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc.
- Threaded inserts for metal – e-z lok thread inserts for metal. solid threaded inserts that are strong, easy to install, and self-locking. for optimal holding power in metal.
- Quickly repair damaged threads – quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts.
- Strong threads made easy – simply drill the hole with a standard drill. tap the hole with a standard tap. turn in the insert with a screwdriver, bolt/jam nut, or an e-z lok drive tool.
SHOWview product -
Product Highlights
- Size:m10;hex shank 1/4inch.thread pitch 1.5mm.male thread.
- Widely used in mold manufacturing, pneumatic air batch, diy, auto repair and other professional machine maintenance, etc.
- Material:chrome vanadium steel;protect against rust and corrosion.
- Strong applicability:the hex bit socket set uses a universal hexagonal shank, which can be used for various chucks, various screwdriver bits and drill bits.
- Package contents:1pcs hex shank screwdriver socket.
SHOWview product -
Product Highlights
- 【 wide application】------ suitable for soft woods of pine, plywood, fiberboard, etc, work ferfectly on the furniture combination. pieces pack of furniture screws threaded inserts for wood furniture.
- 【 usage steps 】------ pre-drill a proper hole (suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use our internal hex wrench to screw in. tip: if the furniture wood is with high-hardness, please enlarge the hole.
- 【 perfect inserts nut assortment kit 】------ threaded inserts for wood are used for pre-embedded connectors for wood furniture. standard hex socket head, smooth & flat, features flanged thread texture, stable structure and easy installation.
- 【 high quality material】 ------ high quality carbon steel with high hardness. these furniture screws are wear-resistant and very durable to use. standard internal hex socket type without burr and non-slip design. yellow zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical.
- 【 what you get】------ in this kit, you will get 220pcs screw-in nuts and wrench are organized in a durable box. internal thread insert type: 1/4"-20 and 5/16"-18, external diameter: 10.5mm/0.41inch. 4 sizes: 1/4"-20x10mm 20pcs; 1/4"-20x15mm 20pcs; 1/4"-20x20mm 20pcs; 1/4"-20x25mm 20pcs. internal thread size: 5/16"-18, nut external diameter: 12mm, length: 25mm.4 sizes: 5...
SHOWview product -
Product Highlights
- Size: internal thread insert type: m6; external diameter: 0.41”/10.5mm; total length: 15mm. (m6x15mm)
- Usage: pre-drill /drill a well-sized hole (suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use a proper 6mm internal hex tool to screw in. tip: if the furniture wood is with high-hardness, please enlarge the screw hole.
- 100 pieces pack of m6 furniture screws threaded inserts for wood furniture.comes with hex spanner & twist drill.
- Material: high quality carbon steel with high hardness. these furniture screws are wear-resistant and very durable to use. standard internal hex socket type without burr and non-slip design.
- Applications:these furniture screws are suitable for furniture hardwood/ solid wood, for furniture combinations.
SHOWview product -
Product Highlights
- High quality: all the inserts nuts are made of high quality carbon steel and with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, non-slip flanged design.
- Easy to use: first use the bit to pre-drill a well-sized hole, which depth is 1-2 mm longer than furniture screw, then use the internal hex wrench to screw in. please note that if the furniture wood is with high hardness, please enlarge the screw hole.
- What you get: in this inserts nuts set, you will get 120 pieces 1/4 inch - 20, 5/16 inch - 18 threaded nuts assorted kit for your wood furniture. which are constructed with standard hex socket head, smooth and flat, features flanged thread texture. along with 2 hex wrenches to help your installation more fast and convenient.
- Product size: 80 pieces nut which internal thread insert type is 1/4 inch - 20, external diameter is 10.5 mm / 0.41 inch. 4 sizes of 1/4"-20x10mm, 1/4"-20x15mm, 1/4"-20x20mm, 1/4"-20x25mm; 40pcs nut which internal thread insert type is 5/16"-18, external diameter is 14mm/0.55inch. 4 sizes of 5/16"-18x12mm, 5/16"-18x15mm, 5/16"-18x20mm, 5/16"-18x25mm, with m6 m8 hex wren...
- Wide application: these inserts nuts are strong and durable will work good for soft woods of pine, plywood, fibreboard; also great used for hard wood, such as solid wood, have a good effect in the advanced furniture combination.
SHOWview product -
Product Highlights
- ① style a function: used for assisting in the placement of shaft. put piercing bar in the end of the pin, then push it though.pin will come out of the hole and piercing bar will be in. great for changing jewelry. groove at the end helps prevent slipped and cover external thread to avoid injuries while insert.protect skin from external threads scratch. ② style b function...
- Tips: ① go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② push piercing bar through slowly to allow time to adjust. ③ can be autoclaved and reused as steel taper more comfortable and durable.④ why no thread inside the hole? as your external thread bar isn't made from our shop,i'm not sure if both end threads match,so holding bar ...
- Size: 14ga(1.6mm) thickness,2.4'' length(60mm). one package contains 2 insertion pins. ① style a: a hollow at the end, ( "no thread inside" will not screw onto your externally threaded jewelry,just holding). ② style b: no hollow,just stretch piercing hole to 14g(1.6mm) thickness.
- Advantage: ① more safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② painless and safe when piercing bar push into hole as the large end cover external thread. ③ doesn’t irritate as our taper grow from small to large gradually.④ reinsert/reopen a piercing hole that had shrunk "a bit" or begin to close up,actually don't need go back to pierce...
- 316l implant grade stainless steel material. insertion taper's option with 20g/18g/16g/14g/12g/10g/8g,please choose the size that suits you best.
SHOWview product -
Product Highlights
- One order includes 2 different styles: 1pc threadless piercing taper, 1pc external thread piercing taper, which can fit two different types of piercing jewelry.
- Piercing changing tool: ① external thread piercing taper: guage: 16g(1.2mm); bar length: 28.5mm; thin pin in the top: guage: 0.9mm. ② threadless piercing taper: guage: 16g(1.2mm); bar length: 30mm/35mm; thin pin in the top: guage: 0.48mm, length: 4.5-4.8mm. please choose the suitable size for you before placing.
- Material: piercing insertion tapers are made of g23 titanium. nickel-free, lead-free, completely non-corrosive. no harm to sensitive skin and comfortable for daily use.
- Function: ① enlarge your piercing hole's size to 16g(1.2mm). make you stretch piercing hole easily and smoothly. don't hurting skin. ② used for assisting in the placement of piercing jewelry. put a piercing stud into the top of the piercing taper, then push it through totally your piercing hole, take the taper out of the hole and let the piercing jewelry stay
- Using instructions: step 1: put a piercing bar into the top of the taper, step 2: then slowly push piercing taper completely into your ear/lip/nose hole. step 3. after through your ear/lip/nose hole, reomve the taper piercing tool from the hole and let the bar stay. step 4. screw the piercing top. more details, you can check the using instruction picture.
SHOWview product
Coupon copied
