10 Best
Heat Shrink Tubings
-
Product Highlights- With good heat resistance, fast shrinking, you can use them for a long time
- Including 12 different sizes(1mm,1.5mm, 2.0mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 7mm, 10mm, 13mm) and 5 different colors(black, red, green, blue, yellow), you can use the size and color as you need
- These heat shrink tubing are made of high quality polyolefin material, with 2:1 retraction ratio, will shrink to 1/2 of its supplied diameter
- Easy to use, you can cut this heat shrink tubing by scissors or sharp knife
- This heat shrink tubing can be widely applied for electrical insulation, wire bundling, color coding, mechanical protection, wire connection and daily repairs etc
SHOWview product -
Product Highlights
- With good heat resistance, fast shrinking, you can use them for a long time
- Including 12 different sizes(1mm,1.5mm, 2.0mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 7mm, 10mm, 13mm) and 5 different colors(black, red, green, blue, yellow), you can use the size and color as you need
- These heat shrink tubing are made of high quality polyolefin material, with 2:1 retraction ratio, will shrink to 1/2 of its supplied diameter
- Easy to use, you can cut this heat shrink tubing by scissors or sharp knife
- This heat shrink tubing can be widely applied for electrical insulation, wire bundling, color coding, mechanical protection, wire connection and daily repairs etc
SHOWview product -
Product Highlights
- {better material}:better material:the outer layer is made of high-quality and soft cross-linked polyolefin material(also call:po) and the inner layer is made of hot melt adhesive. low density, good processability, economic and environmental protection.the outer layer material has the advantages of insulation, corrosion prevention and wear resistance, while the inner lay...
- {tighter fit}:there is a layer of nice adhesive inside the heat shrink tube.you can clearly see that once the heat shrink tube is heated and shrunk onto the wire, the adhesive will slightly exude from the end.360° tight fit, very firm, no looseness or falling off,form a strong and wear-resistant waterproof, dust-proof, insulated and sealed space.
- {4:1 higher ratio}:the high shrinkage heat shrinkable tube can shrink to 25 % (1/4 )of its original size.it can shrink more tightly and be more firmly.
- {suit for oversize components}:large diameter and high shrinkage are especially suitable for some oversized or irregular components.specially designed for cables, connectors with special inner diameters, the high shrinkage ratio can protect the insulation of components or cable plugs with large size differences in different parts, and connect and wrap them.the over-expa...
- {where can you use it}:perfect for particularly large connectors,electrical automotive marine wire cable insulation,wire cable repair arrange and protect,seals bunding cable harness hose, wrap irregular surface,daily repairs(like usb,phone,glasses,cable plug),the anti-corrosion protection of metal pipelines and water pump and so on...
SHOWview product -
Product Highlights
- Total 164pcs ratio 2:1 heat shrink tubes，5 colors (black, yellow, blue, green, red), 10 sizes.length: 80mm each，item shape:round/flat
- Fully shrunk internal diameter: φ0.5mm,φ1.0mm,φ1.5mm,φ2.0mm,φ3.0mm,φ4.0mm,φ5.0mm,φ7.0mm,φ10mm,φ15mm
- Material:made of polyolefin, shrinkage ratio:2:1
- Supplied internal diameter: φ1.0mm,φ2.0mm,φ3.0mm,φ4.0mm,φ6.0mm,φ8.0mm,φ10.0mm,φ14.0mm,φ20mm,φ30mm
- Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and repairs etc.also works well for protecting headphones and phone cables，fast shrinkage, it is more simple and convenient to use with the heat gun
SHOWview product -
-
Product Highlights
- Handy diy tool-- handhold size 9x2inch, 230g, the 1/2 inch precision nozzle provides a small area of work on local heat without damaging other vital parts of your works. au plug with 59inch/150cm long cabl, quite sufficient for your projects. besides, the package comes with additional 127 pcs heat shrink tube.
- Ideal for embossing, shrink wrapping,fast-drying paint/gule/ diy handmade soap or candle, removing adhesive labels, fixing shape like as clay crafts, which will be firmer and brighter after using this heat tool.
- Heat up quickly-- it can reach at 200°c within a few seconds. the body is made of abs plastic outside and stainless steel inside for purpose of high temperature resistant.rated voltage 230v
- Safe and durable-- clear safety shield and metal fold stand designed to cover and stabilize the hot metal nozzle. at the heat gun tail, the heat vents in both sides designed to reduce internal temperature and extend its using life.
- Be aware of keep 5 cm distance from your project and to heat it at about a 45 degree angle to avoid heat suck.do not direct the hot air against people or animals
SHOWview product -
Product Highlights
- Safety material: heat shrink tubing are made of thick polyolefin material, thick wall, used for metal wire, insulation and protection, safe and reliable.
- Five colors (red, black, dark blue, dark green and yellow), used to distinguish between different specifications, easy to use. small size, light weight, easy to carry and store.
- 2 : 1 heat shrink ratio: supplied internal diameter: 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, fully shrunk internal diameter: 0.75mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm. each is 45mm length.
- Transparent plastic box is divided into 12 compartments, corresponding to different specifications and colors of the heat shrink tubing, clean and tidy. the bottom of the box is attached with a simple description, it is more convenient, a side of box has ring.
- Valuehall heat shrink tubing is ideal protection tube for protecting wire, cable, can be used to protect metal wire or fix the broken wires, electrical insulation, mechanical protection, wire connection, wire ends process, wire / cable junctions, daily repairs, etc.
SHOWview product -
Product Highlights
- 【professional 164 pieces heat shrink tubing】manufactured from high quality thermoplastic polyolefin and offer excellent electrical properties. 8 sizes 5 colors, shrink ratio: 2:1. suitable for electrical insulation, splicing electrical cables, cable protection, prevent metal corrosion, color coding, wire/cable repairs, etc. heat shrink tubing in various sizes to meet yo...
- 【diy widely used】au plug 300w mini heat gun can be used for crafts, epoxy resin supplies, shrink packaging, candle making, embossing, watercolor drying, shrink tubing, diy craft embossing, watercolor dryer, drying paint, paper, diy cup turner spinner cellphone etc. if you like diy, it's a great tool for creating your own handmade work.
- 【mini heat gun】at just 8.8 inches in length and 1.8 inches in width, you can easily operate this heat gun in one hand, the heat gun's textured abs plastic body provides a better grip. this size of the heat gun not only meets people's daily needs, but also is easy to carry and store. it also with 85cm wire and plug will allow wide coverage on canvases.
- 【high efficiency working】300 watts, nozzle temperature can quickly reach 200℃. the vent at the rear can reduce the internal high temperature and prolong the service life. mini heat gun tool can quickly reach 200°c/392°f in seconds, when you work at the places which not easy to reach, the mini heat gun is especially suitable for heating the object there; the heat gun can...
- 【high quality and durable】mini craft heat gun for epoxy resin adopts anti-scalding non-slip handles on the outside, independent switch buttons, and high-quality stainless steel air outlets and stainless steel brackets inside, making the use process safer.
SHOWview product -
-
Product Highlights
- Heat activated adhesive lining- the adhesive that coats inside of the heat shrink tube is actually the outstanding feature! the adhesive lining can not only completely seal out any joints from air and dust, but also comes out the ends slightly and creating waterproof and long-lasting insulation.
- A wide range of applications- fix a damaged wire, seal out moisture, or provide enhanced strain relief, anti-rust and anti-corrosion protection of solder joints, wire harnesses organize, electronics protection & insulation treatment, seal your electrical needs and so on....
- 3:1 shrink ratio - it is a 3:1 heat shrink ratio and will shrink maximally to the original 1/3.
- Multiple protection functions - heat-shrinkable tube is made of safe and environmental friendly material(halogen-free, low smoke, non-toxic), has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. anti-aging, flexibility and tough.
- Easy and fast simply slide heat shrink tube over your connection point and apply heat. professional connections made in seconds.
SHOWview product
Coupon copied
