10 Best
Hose Floats
-
Product Highlights- Stop that daily chore of filling and cleaning your dogs water bowl with this easy to clean auto filling water bowl
- The easy-clean auto-fill water bowl is an automatic filling water bowl for all sized animals. they work great for dogs and cats up to livestock and horses.
- This water bowl has a compact float valve in it that keeps the bowl filled at all times even for large dogs and many dogs sharing it.
SHOWview product -
Product Highlights
- Flotation device would control the water level and auto-fill water, float valve can shut off water flow when it is full. as soon as your pet drinks and the level drops, the float drops and more water flows into the bowl. holding 0.53 gallons (2 l) water, suitable for dogs, cats, birds, chicken, ducks, rabbits or other small farm animals.
- Need to purchase and connect a 1/2-inch female screw thread hose or screwed conduit, if it is just a water pipe or garden hose you had, need to add a female-male thread adapter. fits with australian standard hose.
- It is an automatic water bowl without heating function, which made by top-quality bpa free plastic material and safety for pets, farm animals. durable plastic would great for outdoor use and not easy to fade and broken. uv resistant plastic would prevent fading when used outdoor.
- This pet water dish can be fixed on flat ground by a nail or screw to prevent the active pet from overturning it. teflon tape provided, you can use the plumber's tape to stop the leak around the fittings when hose hook up from water faucet to water bowl inlet, it will work perfectly.
- Check this dog water dispenser working condition regularly, the float valve can be replaced to remove bad tastes and keep water fresh after long-period use.
SHOWview product -
Product Highlights
- [function] work on pool cleaner hose, allows the hose to stay afloat and not sink, to better absorb dirt.
- [material] made of high quality material, much harder, not easy to break or corrode, longer work time.
- [package] includes 4 snap on floats, numbered #896584000-280. check the quantity after receiving.
- [fits for] compatible with 4 wheel pressure pool cleaner, 2 wheel suction pool cleaner, 4 wheel suction pool cleaner.
- [note] easy to use, cost-effective cleaner part. ask us if you still have any questions.
SHOWview product -
Product Highlights
- Brass float valve: the brass float valve is made of high quality brass and plastic, rubber washer ensures a tight, no leak. stronger and more durable than plastic float ball valve.
- Automatic water supply: use the principle of floating the water level of the float to control the water inlet and outlet switches to achieve a constant water level effect, you can adjust the water level by rotating the metal wing nut or the green float.
- Durable material: this automatic water bowl is made of 304 stainless steel, durable, no rust, easy to clean. bowl size: 10"l x 10.6"w x 4.7"h. hose size: 1/2" id, 31.5" in length.
- With drain hole: there is a drain hole at the bottom of the water bowls, which is convenient for you to clean the drinking bowl and discharge sewage, providing a clean drinking environment for animals.
- Widely used: this stainless steel water bowl can be used for dogs, cattle, calf, sheep, goats, horses, pig and so on. large capacity enough to meet the drinking water needs of animal.
SHOWview product -
Product Highlights
- -material and size: high-quality 304 stainless steel, strong and durable, will not rust all year round. the extended hose can meet your length requirements. large capacity: maximum capacity of 2.5l to satisfy your pet's drinking water demand.
- -easy to install : not only can be placed directly on the ground, but also the water bowl can be fixed on the wall with expansion bolts, which is easy to operate.(rear 2 screw fixing holes, easy to fix ) there is a drainage hole at the bottom to release residual water
- -package included: 1pcs stainless steel waterer bowl (with drainage hole) +1m hose +1 pcs plastic water level controller (if you have any questions about the product, you can contact us directly)
- -automatic and convenient: it use of float water level floating principle control the inlet and outlet water switch, to achieve a constant water level effect, keeps enough water and always clean water since the plastic water level controller will be bitten by pets， we fix the cover so that the pet cannot open it.
- -smooth edge polished： to avoid traumatic infection the caused by scratching
SHOWview product -
Product Highlights
- No additional float switch needed: it's an all-in-one submersible marine bilge pump with a built-in float switch for boat bilge pump; also, the 3 wires can be set up for automatic (brown/white wire), manual (brown wire), or even both
- Easy to install and clean/service: our boat sump pump with float switch is equipped with a 1-1/8" hose outlet and snap-lock strainer base for easy installation and maintenance; also, our 12 volt water pump for boats runs in silence without vibrating
- Enjoy added peace on the water: this 1100 gph 12v boat bilge pump with float switch will minimize the risk of emergencies or damage; it'll automatically remove unwanted water, so your boat stays buoyant and stable, even while you’re away
- Built sea-tough and ultra-reliable: the 12v submersible water pump is engineered to withstand the harshest marine conditions; it features a water-tight, impact-resistant housing with a stainless steel shaft and blocked marine boat wiring
- Comes with 2 years of coverage: we're proud of the design and quality of our boat bilge pumps; we're confident they'll perform as advertised and back each one with a 2 year replacement promise because we stand firmly behind our products
SHOWview product -
Product Highlights
- ✅ high compatibility: this modern design hose float for your pool cleaner isn’t designed for a single design, but it is designed for multiple designs. excellent pool cleaner compatibility. perfect compatibility with polaris pool cleaner models 180, 280, 380, 3900.
- ✅ top grade materials: a superior quality that will guarantee you better service. this d10 hose float is made of high-quality material which is of heavy duty and well-tested by the manufacturer.
- ✅ ultimate pack: we deliver the best count in every single pack. every pack has 3 feed hose floats d10. get more than enough supply for the best cost and will last you long before going back to the market.
- ✅ superb quality: after replacement, this hose float will last long before the next replacement and you will experience fewer defects. top class performance is enhanced by its one of its kind design. say bye to regular replacement of your hose float for your pressure pool cleaner.
- ✅ 𝟏𝟎𝟎% 𝐋𝐈𝐅𝐄𝐓𝐈𝐌𝐄 𝐖𝐀𝐑𝐑𝐀𝐍𝐓𝐘: customer satisfaction is our priority. if for any reason you're not completely satisfied, we will compensate you and offer extra benefits to ensure your rights. buy with confidence!
SHOWview product -
-
Product Highlights
- Designed for use with polaris 180, 280, 380, 480, and 3900 model pool cleaners
- Manufacturer suggest to put feed hose floats every 3 feet apart
- Fits and replace polaris feed hose float d10
- Hose floats help the cleaner lift by giving the hose buoyancy
- This feed hose float is not compatible with polaris 360 model
SHOWview product -
Product Highlights
- Ideal replacement: bluestars d10 pool cleaner feed hose float is designed for both above-ground and in-ground pools, it offers reliable support in various pool setups. our feed hose is perfectly compatible with polaris pool cleaner models 180, 280, 380, and 3900. please check the compatibility with your previous part and appliance model before ordering this replacement,...
- Premium quality: bluestars d10 hose float is made of sturdy and wear-resistant abs plastic materials that are well-tested by the manufacturer to boost the high performance of your pool cleaner.
- Replace your failure hose float: if you notice any signs of wear, cracking, or loss of buoyancy, your pool cleaner's movement becomes uneven or it tangles frequently, it might be a sign that the float is no longer functioning effectively. bluestars d10 pool cleaner feed hose float replacement part will fix those symptoms and help ensure consistent and efficient pool cle...
- Keep the feed hose afloat: bluestars d10 pool cleaner feed hose float serves as a buoyancy accessory that helps keep your pool cleaner’s feed hose afloat on the water surface. this prevents the hose from sinking and getting entangled, ensuring an effective pool cleaning.
- Easy to use: this float can be easily attached to the feed hose, providing hassle-free setup and improved pool cleaning performance. you just need to gently detach the old float from the pool cleaner’s feed hose by sliding it off the hose then slide the new d10 pool cleaner feed hose float in the same position as the old one. please ensure the float is positioned proper...
SHOWview product
![[Upgraded] Ultra Durable D10 Pool Cleaner Feed Hose Float Replacement Part by Blue](https://m.media-amazon.com/images/I/41kvRidEzdS._SL500_.jpg)
Coupon copied
