10 Best
Hot Knife Foam Cutter Home Depots
-
Product Highlights- [black blades & temp control] gonytia hot knife foam cutter has chosen a brand new blade manufacturing material. the black blade heats up faster and cuts through the foam more smoothly. the gonytia hot knife can heat up to the working temperature in seconds. there are 16 levels of adjustment to control temperature and power. it ensures proper temperature for any job.
- [wide application] gonytia hot knife foam cutter is suitable for lightweight foam, kt board, pink foam, polyurethane, polyethylene, expanded polystyrene (eps) and extruded polystyrene (xps), styrofoam, polyester foam, sponge, rubber, etc.
- [three 6 inch blades] the package comes with three 6" (15cm) blades. no need to buy extra blades again. plus 6" is always the perfect length for foam cutter; a 4"(10cm) blade is a bit short and may not be able to cut through thick foam, 8"(20cm) may be long enough but can be bent too easily due to its length.
- [clean and smooth without mess] gonytia hot knife foam cutter is a professional hand tool for cutting foam plastic and similar materials for packaging, construction, sculpture... it seals the edges cleanly, leaves no trace of debris. you can cut the foam board at any angle and make it into the shape you want.
- [convenient accessory] the package also includes 1 piece of scraper for cleaning the blades after use, l-shaped wrench for easy blade replacement.
SHOWview product -
-
Product Highlights
- Cuts foam, eifs, icf, nylon rope, webbing, synthetic fabric, and plastic
- Dual-use cutting blade for line and groove cutting
- The 5-1/2 in. blade on this hot knife quickly heats to 975° f to make fast, clean cuts in foam and plastic materials. the hot knife comes with a depth adjusting sled to make repeat cuts or long cuts at a precise depth.
- Easy push-button activation, auto-off for safety
- Flat edge shapes candles, foam and other craft materials
SHOWview product -
Product Highlights
- Changeable cutting pin shape: bend the div cutter arbitrarily (see the usage method below otherwise it can be easily damaged).
- Overload shut-off function: the overheat protection device automatically reduces performance.
- Save electricity: a power supply can be applied to 5 types of cutting pins.
- Long heating time: support continuous heating for 8 hours until work. suitable for drilling, grooving, cutting, carving and modelling.
- Foam pen appropriate temperature: 5 cm ≥ 450 ℃, 10 cm ≥ 400 ℃, 15 cm ≥ 350 ℃, 20 cm ≥ 350 ℃, 25 cm ≤ 350 ℃, to use different blades for different materials (see "note")
SHOWview product -
Product Highlights
- 【wide application】minova rotatable hot knife foam cutter suitable for lightweight foam, kt board, pink foam, polyurethane, polyethylene, expanded polystyrene (eps) and extruded polystyrene (xps), styrofoam, polyester foam, sponge, rubber, etc.
- 【rotatable hot knife】minova foam cutter tool can be rotated from 90° to 180°, which can cut foam from multiple angles.
- 【easy to use】quick heating and easy operation. minova foam cutting tool includes a temperature control dial on the handle. there are 16 steps adjustment to control temperature and power. it ensure the proper temperature for any job.
SHOWview product -
Product Highlights
- ✅【wide application】minova rotatable hot knife foam cutter suitable for lightweight foam, kt board, pink foam, polyurethane, polyethylene, expanded polystyrene (eps) and extruded polystyrene (xps), styrofoam, polyester foam, sponge, rubber, etc.
- ✅【packing list】includes minova heat cutter, heavy duty case, one 8" blade, 6" blade, 12" ribbon blade, 6" u-type blade, steel brush, hex allen wrench, pincer, scraper. ideal for use in architectural modelling, design and diy projects.
- ✅【rotatable hot knife】minova foam cutter tool can be rotated from 90° to 180°, which can cut foam from multiple angles.
- ✅【efficiency & air cooling】the foam cutter is 200w which can heat up quickly and cuts smoothly. you can easily adjust the temperature and power using a knob on bottom of foam cutting tool. air cooling part can ensure that it does not stop working due to excessive temperature, and keep electronic components in good condition, as well as improving work efficiency.
- ✅【customer first】 minova are committed to providing you with the best customer support. once any product defects are found, you can immediately contact us who will provide you a satifying solution, which can also improve our product and provide customers with a better user experience.
SHOWview product -
Product Highlights
- 【smooth operation】: there is a pure copper induction coil inside the heated knife, which adopts innovative circuit design to heat fast and evenly. heated knife can give you the same experience as cutting butter and bread. the cutting process is very smooth, sealing the edges with minimum of smoke and no burned edges.
- 【nickel-chromium alloy blade】：rope cutter adopts high-quality nickel-chromium alloy blades, which is not afraid of high temperatures and has a long service life. blade temperature can come up to 1000°f in 7s. double protection of thermostat from over-heat. (notice: if you prefer the high temperature to make the foam smell, use the mask when you use it).
- , sponge, rubber, nylon, canvas, synthetic, fabric, bands, awnings, filter cloth, belt, rope, cord, wallpaper, etc.
- 【adjustable temperature】: the adjustment knob on the top of the fabric cutter has 16 positions to adjust temperature and power. the wide adjustment range can meet the needs of most industries and jobs. the wider the scale on the knob, the greater the power and heat. if you can't master the temperature control temporarily, we suggest you practice several times on the clo...
- 【spring-loaded safety trigger switch】: because rubber cutter can reach the working temperature in a few seconds, the spring-loaded safety trigger switch can effectively avoid the danger caused by too high temperature. in order to improve the service life, we do not recommend working for a long time (notice: take a break after continuous use for more than 1 min).
SHOWview product -
Product Highlights
- High-quality engineering plastic shell.
- Multifunctional knife holder, pure brass made high thermal conductivity.
- Hot wire foam cutter with 3 tips
- 10-second heat up time，fast heating, heating can be completed in 10 seconds and working
- Ergonomic design.
- High temperature resistance and shatterproof.
SHOWview product -
Product Highlights
- Package includes: total of 19 pieces including - 30w handle - 1 upgraded hot knife nozzle , 11 hot knife nozzles - 1 safety stand - 2 chuck sleeves - 2 chucks - 1 user manual. please do not apply much strength not to have the head nozzle broken
- Heat resistant handle: whk-0005 comes equipped with a mechanism of cooling system which prevents the handle from heating up despite the nozzles being heated up to 530 °f/250 °c
- Versatility: product has a number of blade nozzles with different shapes that allows it to use on a variety of materials and occasions
- Testing: while the free hand method empowers you to bring your artistic ideas into reality, we recommend testing on a sample of foam or plastic you’ll be using to acquire hands on practice. the tool is suitable for low density foams and thin plastic sheets with up to 3 mm thickness
- Customer support: we offer 6 months money-back warranty for any pertinent issue reported and a 24/7 customer support for our valuable customers
SHOWview product
Coupon copied
