10 Best
Jet Table Saws
-
-
Product Highlights
- Outstanding performance: the motor maximum rotating speed is up to 10000rpm, providing ultra-reliable cutting power but low noise. high-concentricity alloy saw blade & 29 mm; the maximum cutting thickness is easy and suitable to use at home.
- Precision cutting: four rubber shock-absorbing pads to prevent slip and shock during work. diy multifunctional mini bench joiner, compact, and easy to carry.
- Premium quality: aluminum alloy panel design matches with the all-metal workbench, solid & durable. power: 350w, model: t5, cutting depth: 26-29 mm (1.02-1.14 inch), cutting width: 100 mm (3.94 inch), speed: 0-10000 rpm, clamping range: 0.3-4 mm (0.01-0.16 inch), push feet angle: 0-90°.
- 【precision cutting】- equipped with the ruler & backer in the cutting table for easier & more precise cutting. the push-foot angle can be adjusted to 90 degrees, 45 degrees inside, 45 degrees outside.
- Wide application: designed for planing old, weathered, rough, and worn wood, giving it an exceptionally smooth finish. the joint planer can be used for planning wood, bamboo, etc. note: the height of this blade is fixed and cannot be adjusted, and it cannot cut too long objects.
SHOWview product -
-
-
Product Highlights
- Measures: 14" x 4-1/8" x
- Eliminates dangerous gap around blade where thin off-cuts can get wedged
- Fits: jet proshop saw: jps-10ts, 708490, 708491, 708493, 708494, 708495, laguna fusion 1.75hp 10" table saw, baleigh ts-1044h, general international 50-090r m1
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Installation instructions included
SHOWview product -
-
Product Highlights
- Laguna fusion 1.75hp 10" table saw, baleigh ts-1044h, general international 50-090r m1
- Eliminates dangerous gap around blade where thin off-cuts can get wedged
- Fits: jet proshop saw: jps-10ts
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Measures: 14" x 4-1/8" x installation instructions included
SHOWview product -
Product Highlights
- If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. this can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. zero clearances help minimize this situation from happening since there is no gap between the...
- Zero clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. you can also use zero clearance inserts with dado blade sets. the reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. we recommend that you use separate zer...
- Measure your factory insert and compare size before you order. zero clearance inserts are table saw specific. since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. also be aware of the shape of your current insert of whether it...
- Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. this is especially true when cutting plywood. zero clearance inserts help prevent tear out by essentially enveloping the blade on...
- This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. the insert features two snug fit sand-able side tabs that allow you to remove a little material at a time for a perfect fit if necessary. the insert also features a top and a side snug fit screw for a tight fit to you saw with no...
SHOWview product -
Product Highlights
- The perfect fit - the tire makes an excellent replacement for your band saw blades for wood and metal cutting; fit saws that require a 14 x 1 x 0.095-inch tire
- Easy to install - easily install the traction bands for power wheels without adhesive. stretch the tires to ensure a tight fit on your wheel. note: soak the tires in warm water before installing
- Bandsaw replacement parts - upgrade and replace old tires on your saw with impresa’s urethane bandsaw tires. comes with 2 tires to protect your wheel so your saws run smoother and quieter
- Strong and efficient - our orange 14-inch tires for bandsaw blades are made of heavy-duty, professional-grade urethane that outlasts standard rubber and plastic tires, increasing efficiency and life expectancy
- Wide range of compatibility - our tires are compatible with jet bandsaw parts and powermatic bandsaws. fits jet jwbs-14dxpro, jwbs-14cs, jwbs14os, fits grizzly g0457 g0555 g0555p g0555x g0580 t21005 g1019 g1019z, & fits powermatic pwbs-14, pwbs-14cs
SHOWview product
Coupon copied
