10 Best
Liquid Coolings
-
Product Highlights- Dynamic multi-zone rgb pump head and fans: 29 total individually addressable rgb leds (13x on the pump cap, 16x on the fans) light up to produce stunning, customizable lighting effects to match your build.
- Flexible motherboard +5v argb support: convenient control of your lighting through compatible motherboards.
- Cool cpu, with cooler lighting: 240mm all-in-one cpu cooling that gives your pc build dramatic colour with 2x 120mm corsair sp rgb elite pwm fans generating great airflow and vibrant rgb lighting.
- Concentrated cooling with airguide: fan speeds run up to 1,500 rpm, bolstered by airguide technology that channels concentrated airflow where it’s needed.
- Tap into the icue software ecosystem: corsair icue software lets you control and sync your cooler’s rgb lighting with select icue compatible devices (requires a corsair icue rgb controller, sold separately).
SHOWview product -
Product Highlights
- There are 4 places in total of 4 places to pass through the water supply tube
- Type: exclusive undershirt
- Double layer of fabric on the chest for better water retention and lasting cooling
- Mesh fabric is placed on the underarms that make it easy to sweat so it is highly breathable and quick drying
SHOWview product -
Product Highlights
- 3rd gen. dual-chamber pump - the copper plate heat exchanger anchors cooler master’s 3rd gen. dual-chamber pump, which features greater water volume capacity, improved flow rate between chambers, and triple industrial-grade epdm rubber gaskets.
- Advanced sickleflow 120 rgb fans - with their ultra-quiet rifle bearing, the translucent 7-blade air balance 2.0 fans provide higher air pressure (2.5 mmh2o) with less noise (27 dba). the new frames feature a screw hole spine which improves overall structural durability.
- Quietly improved v2 rbg - with more vivid rgb lighting, enhanced cooling and significantly quieter performance, the ml240l v2 rgb sets the bar even higher for quality mainstream liquid coolers.
- Radiator surface area increased by 25% - the 277 x 119.6 x 27.2 mm radiator uses fins which are significantly deeper than its predecessor, leading to highly-efficient heat dissipation along the wider water channels
- Rgb motherboard sync or wired controller - can be synchronised to rgb compatible motherboard systems (4-pin) or assigned manually via a wired controller and 3-to-1 splitter (included).
SHOWview product -
Product Highlights
- 【unique pump head】 the octagonal shaped cold pump head adopts the exclusive frame of the 4th generation water pump, the swirling rectangle design and the argb halo under the logo luminous marking creates a colourful visual experience, and the life of the cold pump head is up to 40,000 hours with a rotation speed of up to 3,300 rpm ± 10%, which ensures that the cpu is pr...
- 【fan parameters】equipped with dual-fan tl-c12b-s v2 fan, speed:1500rpm±10%, size: 120*120*25mm, noise≤23dba, power supply interface: 4pin pwm, light interface: 5v/3pin argb, airflow: 66.17cfm(max), with pwm and argb function, can automatically adjust the speed according to the cpu temperature, provide strong airflow and lower noise, argb light colour can be manually adj...
- 【better cooling】 the cooler adopts the fourth generation pump head + 240 cold row size black aluminium fin heat sink plate + protective preparation mesh water pipe + standard configuration 120mm argb fan, to create a low vibration, high heat dissipation, low evaporation, high life span of the one-piece water-cooled cooler area unit.
- 【excellent led lighting effect】fan and water-cooling header argb sync with 5v 3pin on the motherboard to achieve light sync, 1600w colour soft light effect, efficient cooling while providing rich light effect, support light effect series and motherboard sync to avoid insufficient light interface.
- 【convenient installation】 aio cooler compatibility, support amd & intel slots, support amd: am4/am5, intel: lga1150/1151/1155/1156/1200/2011/2066/1700, comes with accessories that can be installed on the corresponding platforms, the installation is simple, can be installed according to the instructions and tutorials.
SHOWview product -
Product Highlights
- Three pwm fans: the speed of three pwm fans can be auto adjusted accronding to cpu temperature, provide the better airflow and lower noise. (note: the pwm mode must be set in bois before liquid cooler operation, otherwise the fan will run at a fixed speed of full speed or low speed)
- Controller included: the controller included in the accessory bag, you can achieve argb sync and pwm with it. max. air flow: 52cfm; noise level: 30.8db(a), fan speed: 800-1800 rpm.
- Addressable rgb sync: the addressabe rgb lighting on the fans and pump can sync with motherboard via 5v 3pin interface, provide even and rich illumination.
- Better cooling performance: with a more efficient cold plate, spraying copper bottom, proprietary pump and fans optimized for static pressure to make sure the excellent heat transfer from cpu.
- Wide compatibility: intel lga 1700/1200/2066/2011-3/2011/1156/1155/1151/1150, amd am4/am3+/am3/am2+/am2/fm2+/fm2/fm1. (note: no amd backplate in the package, the amd must be installed with the original bracket of motherboard)
SHOWview product -
Product Highlights
- Universal size: length-adjustable magic stickers on the sides and shoulders make it suitable for people weighing between 50kg and 250kg.
- Convenient to carry: the package includes a cooling vest, ice packs, bubble bags, and a large-capacity insulated carrying bag. additional ice packs can be carried to extend the cooling time.
- Multi-angle cooling: 6 insulated pockets wrap around the body and can provide continuous cooling for 6-8 hours.
- High comfort: made of 400dpvc material, which prevents water from penetrating the skin while being comfortable and breathable.
- Quality guarantee: customers can contact us for exchange or resolution of any problems within one year.
SHOWview product -
Product Highlights
- Th v2 argb snow was given an industrial look to freshen up the 360-degree rotational cap. adding infinity mirror lighting to this series can bring more diverse visual effects to the build and gives more depth than it looks.
- The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin pwm and 3-pin argb ports on your motherboard and shortens the cable length between the fans. we’ve also included one pwm cable and one argb cable for you to easily manage your cables while assembling your build; you might have experienced easily detache...
- The th v2 argb snow series is now ready for all types of builds; the series has three 120mm fan models, including the th 120/ 240/ 360 v2 argb snow, and two 140mm fan models, including th 280/ 420 v2 argb snow.
- Utilizing the ct120 argb white fans on this model, not only you can match up to some of our chassis’ pre-installed fans, but you can unify your fans with your build! the ct120 argb white provides an 57.05 cfm air flow with 2.23 mm-h2o static pressure while maintaining 25.8 db-a noise level; the th v2 argb snow series has a 27mm slim radiator with a thickened 20mm copper...
- The high-performance copper base plate accelerates heat conductivity. the high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. the low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required; the package includes brackets for the latest intel and amd cpu sockets to be compatibl...
SHOWview product
Coupon copied
