10 Best
Monopod With Tripod Mounts
-
Product Highlights- 【arca-swiss compatible qr plate】 the 38mm arca-type quick release plate ensures safe and rapid camera mounting, and the 1/4” mounting screw is compatible with a broad range of dslr cameras, mirrorless cameras, and camcorders. rubber pads protect your pricey device against scratches
- 【cnc-machined aluminum alloy】 engineered with premium cnc-machined aluminum alloy, the tripod head guarantees durability and high performance under different circumstances, indoor or outdoor. weighing only 10.9oz (310g), it offers convenient portability for photographers on the go
- 【low profile ball head】 featuring a lower center of gravity, this camera head is more stable and able to support a load up to 33lb/15kg. the 3/8” bottom thread with the 3/8” to 1/4” screw adapter fits most tripods, monopod, slider
- 【360° rotation & 90° tilt motion】 swivel the 36mm ball head at 360° or tilt it at 90° in the u-shaped notch for flexible camera positioning. the panning base with a 360° scale enables precise and fluid panorama photography. and a bubble level helps you easily keep the horizon straight
- 【easy operation with lock knobs】 three lock knob ensures an effortless setup and reliable security. loosen the knobs to freely adjust ball head angles, smoothly rotate the camera for panoramic shots, and release the quick release plate. tighten them to secure everything firmly in place
SHOWview product -
Product Highlights
- Detachable smartphone clip: the smartphone holder is detachable to use alone with 1/4-inch screw tripod mount; suitable for smartphones within c width, such as 13/13 pro/13 pro max/13 mini/12/11 pro max/x/xr,, samsung galaxy s10/10+/s9/s9+/s8/s8+/s7/s6/s6 edge, note10/10+/9/8 and android phones
- Easy adjustment: screw the 2 thumb screw knobs to adjust the phone clip's direction and width, easy to secure your phone into the mount without causing damage to your phone
- Application: mount smartphone with or without a case to a tripod, monopod, selfie stick, video slider, ring light, stabilizer, handle grip with 1/4-inch thread
- 360 degree rotation: 360 degree rotation design is perfect for rotating your phone into portrait mode (vertical) or landscape mode (horizontal) without taking the phone out of the adapter
- Durable: made of durable plastic; convenient for use and storage; note: the smartphone, tabletop tripod and hot shoe cradle head are not included
SHOWview product -
Product Highlights
- 【easy to mount】 with a 3/8" screw hole on the bottom for mounting on a tripod or monopod, coupled with a 1/4" to 3/8" screw adapter, the tripod head can easily fit all models of tripods and monopods
- 【upgraded design 】 the locking knob is located on the side of the ball head instead of the bottom of the head, which lowers the center of gravity of the ball head by a further 15%, creating a stronger locking force and better stability
- 【flexible movement with panoramic head】 featuring 360° panning scale with precise calibration and pan lock, this tripod head supports panoramic photography while securing your camera to a tripod. the swivel ball head easily tilts for different angle shooting, whether vertical, horizontal, or overhead.
- 【standard quick release plate】 the tripod ball head comes with a standard quick release plate for broad compatibility. removable qr plate with 1/4" screw on top for dslr cameras or camcorders. it is quick to mount or remove your device
- 【strong & durable】 the maximum load capacity of the tripod head is 11lb/5kg. made of aluminum alloy, the tripod head is stable and durable
SHOWview product -
Product Highlights
- Full 360-degree rotation function for the perfect viewing angle.
- Attached to any tripod, monopod, stabilizer or other filming device with a standard 1/4 inch thread interface.
- Can hold all smartphone or phablet with width between 58mm to 105mm.
- With wireless remote shutter for all iphone and android smartphones.
- Helps you filming steady video for facebook live, periscope, and other live streaming platforms.
SHOWview product -
Product Highlights
- Best design mount - an adjustable loading button in upper, press to open the clip upward. double spring-locked system in bottom, provide the strong clamping force, will secure your device steadily in place allows you fast install and remove your tablet
- Well made - ipad tripod adapter made of abs, the solid structure, thick spine and ball joint supporting pivot at the back centre make sure your ipad be held very steadily, not wobble.the four claws use high density sponge pad with more friction, they can tightly hold your thin tablet and protect it from scratch
- Ball head rotation - 360° rotation & 40° tilt supports devices in both mode landscape & portrail. 360° ball joint allows you to adjust the tablet in any angle and position
- Fit for all tablet - this ipad tripod mount suit for 3.5 - 13.5in tablet and smartphone with thick case. the maximum opening of the tablet clamp holer is 23.5cm (9.25in), and the size of the claw is 2 (0.8in), you do not need to remove your thick tablet case. fit for ipad pro 12.9" 11" 10.5" 9.7", ipad mini , ipad air and samsung tab, surface pro, nexus, kindle fire, am...
- Allows to access all ports without blocking magnetic connector, mic and power port
SHOWview product -
Product Highlights
- Free rotation ball head: upgraded design with 360 degree panoramic base with 2 twist locks which can set your camera at different angle easily and quickly tighten or loosen the ball
- Small and portable: height only 70mm/ 2.76inches, weight only 200g/0.44lbs, easy to carry
- High stability: 28mm low profile ball head design creates stronger locking force and higher stability. screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the ball head, enhance stability
- Wide compatibility: equipped with 1/4 screw, the removable arca type qr plate is suitable for most dslr cameras and camcorders. 3/8" screw hole at the bottom can be attached to tripod, monopod, slider and other stands
- Sturdy and durable: max load up to 11lb/5kg, made of aluminium alloy material, it is very strong and durable; note: camera and tripod are not included
SHOWview product -
Product Highlights
- Comes with 3/8'' bottom screw thread; you can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing
- With fine tuning damping to protect your device from sudden plunge while doing versatile angle shooting
- 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle
- 1/4" arca type qr plate; easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position
- The base with index marking to indicate more precise control. note: tripod head only; camera and tripod are not included
SHOWview product -
-
Product Highlights
- 【wide applications】 the screw adapter kit can combine two photography equipment together. it can be used to connect a wide range of photography accessories such as slr cameras， tripods， camera cages， mobile phone cages， monopods， ball heads， flash mounts， and shoulder rig camera accessories
- 【non-slip design】 the knurled surfaces on some adapters provide a secure grip and make it easy to install and remove these adapters. featuring full thread depth without burrs or raised edges， the kit is easy to use and securely attaches to any compatible device
- 【broad compatibility】 this screw adapter kit for cameras and tripods includes a variety of screw adapters to help you combine and use different photography equipment during photo shooting. the kit includes 5 pcs 1/4” male to 1/4” male adapters， 5 pcs 1/4” male to 3/8” male adapters， 5 pcs 3/8” male to 1/4” female adapters， 5 pcs 1/4” female to 3/8” female adapters， and ...
- 【durable material】 these screw adapters are made of sturdy aluminum alloy material with precision cnc machining and black anodizing treatment for enhanced durability. sturdy metal construction helps withstand daily wear and tear. great for replacing cheap plastic adapters
- Easy to carry】 lightweight and easy to carry, the kit can be used as a handy backup in your photography equipment. these replacement camera screw adapters are widely used to combine two photography equipment together
SHOWview product -
Product Highlights
- Solid built by aluminum alloy, longer longevity compared to those made of plastic.
- No more restriction! flat bottom enables tripod deck of any diameter.
- Professional plate enables quick and easy transfer among your camera and tripod. save your time and energy, lessen the potential abrasion to the bottom screw thread of your camera.
- Double lock lever deliver ensurance and safety for your camera in case accidental fall off.
- Up to four bubble lever help you better perceive your position more accurately
SHOWview product
Coupon copied
