8 Best
Most Expensive 3d Printers
-
Product Highlights- 【high flow hotend achieves 300℃ printing】all-metal hotend comes with a larger melt zone, which offers high flow up to 20-30mm³/s that greatly reduces the possibility of clogging. an extra large fan at the rear of the extruder offers triple airflows to quickly cool prints and ensures good layering for better results. it makes the high speed and high temperature possible ...
- 【planetary dual gear direct drive extruder】 with sovol's self-developed direct drive extruder that comes with planetary dual gear set, sv07 plus offers a higher drive ratio and lighter motor for precise extrusion. we also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions.
- 【customer service】sovol 3d printers come with one-year warranty and lifetime technical support. any question about sovol sv07 3d printer, just click "ask a question" through our storefront's page, report an issue through the "your orders" page. we will fast respond within 24 hours and try our best to resolve your every issue.
- 【max print speed 500mm/s】klipper firmware allows sv07 plus to speed up to 500mm/s at maximum. sv07 plus is equipped with 480x800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. klipper also offers a range of function options, including the height map and input shaper, while...
- 【larger print volume & heating faster】equipped with 600w meanwell power supply, sv07 plus brings super excellent and stable heating performance. upgraded 420w heated bed can be heated to 60℃ in 90 seconds, which is 30 seconds faster at least than most printers in the market ( all sizes ). if you own a sv07 plus, not only you own a 300x300x350mm larger print volume print...
- 【25-point bed leveling】sv07 plus features 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. this precise and smart technology makes it possible to get a fantastic first layer. note: set initial layer height to 0.3mm when slicing will help you get optimal results. if you have any adhension issue we recommend you to...
SHOWview product -
Product Highlights
- 【ultra-fast and exceptional quality】core xy up to 20000 mm/s² acceleration, maximum speed 600mm/s, the acceleration from zero to 600 mm/s takes just 0.025 seconds. from unboxing to starting printing, only 10mins, enjoy happy printing every day and great all-around quality.
- 【filament run-out sensor & power loss recovery】eliminate the problem of empty spools during printing. change filament when empty and resume. worry-free from a power cut-off, you can resume the print from where it left off.
- 【succeed with a perfect first layer】full-auto one-click leveling calibrates and levels the bed properly, making you a perfect first layer for every 3d print. it provides accurate and smooth surface to achieve quality printing performance.
- 【vibration compensation&less waiting time】vibration compensation, eliminating ghosting in prints. nozzle with a flow of 32mm³/s, 50w heating power, 200℃ heating up in 35 seconds. precise and consistent extrusion for smooth and no-blur prints.
- 【robust designs for superior quality】open 3d printer, suitable for use in open and, well-ventilated environments, flexible removable pei steel plate support pla/petg/tpu (0.4mm nozzle) and pla-cf/petg-cf (0.6mm nozzle).
SHOWview product -
Product Highlights
- Massive build volume: with a spacious build volume of 420x420x480mm³, our printer allows you to bring your ambitious designs to life, whether for large models or multiple smaller objects, this generous build volume provides ample space for your creations.
- 300°c high-temp nozzle kit: our printer features a high-temp nozzle kit capable of reaching up to 300°c. the extended hot end design, along with the 60w ceramic heating element and brass heating block ensure fast and uniform filament melting and extrusion. automatic calibration of nozzle pid parameters further improves temperature control stability.
- Effective cooling performance: the print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for comprehensive and efficient heat dissipation. two additional 6025 ball-bearing blower fans behind the print head quickly cool down the newly deposited hot filaments, preventing warping or deformation for better overhang and bridge ...
- Pre-installed klipper firmware: the neptune 4 max comes with the powerful klipper firmware, enabling impressive printing speeds of up to 500mm/s (default 250mm/s) and up to 8000mm/s accelerations, supporting advanced features such as input shaping and pressure advancing. equipped with acceleration sensors on the x and y axes for automatic calibration and improved print ...
- Dual-gear direct extruder: our printer boasts a dual-gear direct extruder with a 5.2:1 reduction ratio for reliable filament feeding and optimal extrusion. the full titanium alloy throat pipe enhances heat dissipation, reducing filament clogs and maintaining consistent printing performance.
- Auto bed leveling + auxiliary leveling: enjoy hassle-free bed leveling with the 121 (11x11) points auto bed leveling system! additionally, auxiliary leveling by hand-twist knobs allows further fine-tuning, ensuring that your first-layer printing comes out perfectly every time.
SHOWview product -
Product Highlights
- ✅ 1，durable and more temperature-resistant extruder with the maximum printing temperature up to 260℃；2，its direct drive extruder can print tpu 95a flexible filament.the heating temperature up to 260℃ achieves smoother filament feeding；3，it supports printing tpu 95a / pla / abs / hips / petg / petg pro filaments, etc. it also supports printing third-party filaments, offe...
- ✅ finder 3.0 retains the classic red and black color scheme of finder 2.0, and features integrated structure design. with no assembly required, it is easy to use in seconds after being unpacked; smaller equipment size and larger build volume for higher volume utilization.
- ✅【190×195×200mm build volume】:the 200mm vertical z-axis height meets the printing needs of most users. let your imagination run wild!
- ✅ 1，finder 3.0 can save the printing status in the event of an unexpected power failure and continue printing after the power is restored；2，when the filament is used up or accidentally broken, finder 3.0 will alarm and pause printing, and then continue printing after the filament is replenished or replaced.
- ✅ the removable glass platform and pei magnetic steel plate platform are available for options. easy platform removal and replacement to meet diversified printing needs.
SHOWview product -
Product Highlights
- 【300℃ high temp printing】all-metal hotend setup comes with a larger melt zone, which makes sv07 could print at 300℃. an extra large fan at the rear of the extruder offers sv07 triple airflows to quickly cool prints and achieves good layering for better results. no more ptfe replacements or firmware flashes needed to print with different materials easily, like abs, nylon...
- 【25-point bed leveling】sv07 uses 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. this precise and smart technology makes it possible to get a fantastic first layer. note: set initial layer height to 0.3mm when slicing will help you get optimal results.
- 【more practical, more convenient】sv07 boasts several optimizations, including leds around the nozzle, tool drawer and high quality belt. added led bars under the extruder helps to observe the prints at night and capture beautiful prints pictures so that you could share with your friends on social media. the high strength belt with anti-slip design ensures stable transmi...
- 【customer service】sovol 3d printers come with one-year warranty and lifetime technical support. any question about sovol sv07 3d printer, just click "ask a question" through our storefront's page, report an issue through the "your orders" page. we will fast respond within 24 hours and try our best to resolve your every issue.
- 【klipper makes print speed up to 500mm/s】sv07 is equipped with 480x800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. klipper firmware allows the high-speed printing of sv07 up to 500mm/s. we recommend you to choose 250mm/s for optimal results. klipper also offers a range ...
- 【planetary dual gear direct drive】 with sovol's self-developed all metal direct drive extruder that comes with planetary dual gear set, sv07 offers a higher drive ratio and lighter motor for precise extrusion. we also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions.
SHOWview product -
Product Highlights
- ➡️with a core xy structure enabling speeds of up to max 600mm/s and rapid acceleration of up to 20000 mm/s², this printer excels in efficiency and quality. equipped with quick-change nozzles, filament detection, and power recovery features, it operates intelligently for seamless, uninterrupted printing. from unboxing to printing in just 10 minutes, enjoy fast, high-qual...
- ➡️open 3d printer, suitable for use in open and, well-ventilated environments, flexible removable pei steel plate support pla/petg/tpu (0.4mm nozzle) and pla-cf/petg-cf (0.6mm nozzle). choose from various nozzle diameter options (0.25/0.4/0.6/0.8 mm) for high precision or high efficiency modes. whether you're a novice or an expert, maintenance is a breeze with this smar...
- ➡️featuring a fully automatic one-click leveling system, this cutting-edge printer eliminates the need for manual calibration of the z-axis, ensuring a perfect first layer every time. with consistent adhesion and smooth surface finish, achieving impeccable print quality has never been easier. step into the future of printing with effortless bed leveling and superior res...
- ➡️experience rapid nozzle changes in just 3 seconds with this high-performance 3d printer featuring a high-flow 32mm³/s nozzle for stable high-speed printing. with a swift 35-second warm-up to 200°c and a dual-sided pei platform for effortless removal, this printer offers versatility with multiple platform options. say goodbye to ghosting with vibration compensation, en...
- ➡️comprehensive after-sales assistance, we are committed to providing exceptional support for all our 3d printers. enjoy a one-month hassle-free return and exchange policy, lifetime access to technical assistance, a one-year warranty, and prompt 12-hour response service.
SHOWview product -
Product Highlights
- 【dual platform options for individual needs】glass platform provides a strong adhesion, so the printing model will not easily become warped. pei magnetic steel plate platform, gold pei plate, anti-warping edge, magnetic sticker owns a strong magnetic force to make sure it is durable. both plate can be easily removed and replaced to meet diversified printing needs.
- 【compatible with multi-types filaments】its direct drive extruder design and the heating temperature up to 260℃ achieve smoother filament feeding. finder 3 not only supports printing abs/hips/petg/petg pro filaments but also meets the printing requirements of tpu 95a flexible filament and third-party filaments. it offers stronger compatibility and a wider application range.
- 【continuation of the classic】finder 3 retains the classic red and black color scheme of finder 2.0 and features an integrated structure design. with no assembly required, it's easy to use in a second after being unpacked; smaller equipment size and large volume for higher volume utilization.
- 【intelligent sensor technology】newly added functions of power loss recovery and filament run-out detection: in the event of an unexpected power failure, it can save the printing status and continue printing after the power is restored. when the filament is used up or accidentally broken, it will alarm and pause printing, and then continue printing after the filament is ...
- 【what you get】flashforge 3d printer finder 3,12 months warranty, lifetime technical assistance and 24 hours professional customer service.
SHOWview product -
Product Highlights
- 【360° all-round exposure】the post-curing station adopts 2 l-shape light bars (each built-in 14 uv led lights), and added 4 uv led beads beneath the turntable. work with 360°auto-rotating turntable and a handheld uv lamp that cures the nooks and crannies and interior of 3d prints, so that the entire model is cured thoroughly without dead ends.
- 【easy and intuitive operation】with a single knob, just press and hold to turn on the machine, then rotate the knob to set an appropriate time for washing or curing, and your models will be ready in a short time. the uv cover can block 99.9% of ultraviolet rays and protect your eyesight during post-curing.
- 【large washing volume】with an 7000ml large capacity sealed water tank, you can directly wash large models printed by elegoo saturn and mars 3, or clean parts in batches, which offers substantial time savings and improves your productivity.
- 【dual function of washing and curing】 elegoo mercury xs contains 1 washing station and 1 post-curing station, with the dual function of cleaning and curing to remove uncured resin of 3d printed models and optimized your print quality, making your post-processing simple and efficient.
SHOWview product
Coupon copied
