10 Best
Pellet Stove Heats
-
Product Highlights- ◎overheating protection: the fireplace fan has a built-in bimetal strip at the base, which protects the motor and thermoelectric module from overheating. the fan base and blades are made of anodized aluminum, which has good thermal conductivity and is rust-resistant and wear-resistant.
- ◎quiet motor: enhances warmth circulation quietly, while cutting wood consumption for the stove and increasing overall comfort. the stable build reduces noise for a safer experience.
- ◎environmentally friendly operation: utilize the heat from your stove with our fireplace fan for an energy efficient and eco-conscious heating solution. widely used in wood and pellet burning stoves, it maximizes heat distribution throughout the room without requiring any batteries or electricity.
- ◎easy to use: achieve warmth faster with this fireplace fan that requires no setup. place it on top of a stove or log burner and it starts spinning automatically at 50c. mounts on any log burner for fuss-free use, distributing heat evenly. perfect for quick and easy heating.
- ◎temperature range recommended: please move the blades gently (no direct hand contact) in case the fan stops operating. compatible with recommended surface temperatures between 122f - 644f (50c - 370c).
SHOWview product -
Product Highlights
- Eco friendly- heat powered, the stove fan generates its own energy by the heat from the stove surface, and no batteries or electricity required.
- Silent and quiet- the noise is less than 25db, you even do not know the fan is there, but you will still feel the warmth.
- Upgrade version- produces more warm air than the old version, circulates about 230cfm.
- Easy operation- no assembly needed, just put on the top of stove, the fan will spin with the temperature getting higher.
- Overall size: 8.3x 4.9x 8.3. operation temperature: 85c - 350c(185f - 660f). good stove safety practice includes the use of a stove thermometer.
SHOWview product -
Product Highlights
- 【no operating cost】the fireplace fan circulates warm air at a high cfm rate (cubic feet per minute), producing energy through heat to operate! when the furnace surface temperature reaches 158-230 degrees fahrenheit (depending on chimney type), the furnace fan will run automatically, without batteries or electricity. enjoy the warmth of your room.
- 【low noise】newly designed blades for more airflow and less noise. the movable part is the blade assembly, so the working noise is less than 45db, and you can enjoy the warm air in a quiet and comfortable environment. this economical and environmentally friendly fireplace fan is suitable for daily use.
- 【6-blade wood stove fan】the 6-blade wood stove fan has faster speed and greater airflow, simply place it over a burning stove and it will absorb the heat generated by the chimney or fireplace to generate electricity and send it to the fan base to drive the blades, effectively circulating warm air throughout the room.
- 【high temperature resistant material and safe design】made of high quality anodized aluminum, the heat fan has excellent temperature resistance, high rigidity and durability to withstand temperatures up to 400°c (752°f). when the surface temperature exceeds 300°c, a safety device raises the front of the fan slightly to protect the teg and motor.
- 【application range】this 6-blade fireplace fan can quickly raise the temperature and keep your space warm. the maximum distance of hot air transmission is 3 meters / 117.9 inches. the fireplace fan is perfect for use in chimneys, houses, winters, etc.
SHOWview product -
Product Highlights
- ♊【rapid warming room】6 blades can generate more warm air than common 5 blade stove fans, provide greater airflow and heat diffusion, warm rooms quickly, circulate hot air efficiently, reduce wood consumption and save oil costs.
- ♊【high temperature protection】our heat activated fans have high-temperature protection device. when the appearance temperature rises to around 340c, it gently lifts the front of the thermoelectric fan to protect the teg and motor.
- ♊【non-electric heating】stove fan is an eco-friendly fireplace fan for wood burning stoves. it is powered by thermoelectric technology, and the furnace fan spins automatically as the temperature rises, requiring no batteries or electricity.
- ♊【super quiet】the only moving part of the furnace fan is the blade assembly, so the working noise is less than 25 decibels, very quiet. you don't even know the stove fan is there, but you'll feel the warmth nicely.
- ♊【durable and high-quality】the wood stove fan is made of durable high-quality anodized aluminum and steel, which is rust-proof and has good thermal conductivity. widely used in wood-burning stoves, air stoves, pellet stoves, wood-burning stoves, wood-burning stoves, fireplaces, etc.
SHOWview product -
Product Highlights
- No batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan's motor. the fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
- Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module. the stove fan can withstand 65-350 ℃(149-660℉) and keep working
- The stove fan can be fixed on the chimney pipe of wood/log burner/fireplace, this new design heat activated fan is suitable for the uneven surface of fireplace and won't take up more space. improve hot air circulation for greater comfort , and reduce 30% wood costs
- Silent operation, spread heat around room and increase temperature with low noise. the moving part is the blades assembly, so the working noise is below 32db. it will not interrupt your reading, work, and other activities. more stable and environmental protection
- When the temperature reaches 212°f, woodstove fans works great cfm: 160-220. if the fan doesn't run in time after reaching the temperature, please move the blade slightly (please do not touch it directly with your hands). please test the temperature of the fireplace before purchase and pay attention to monitoring the temperature change during use
SHOWview product -
Product Highlights
- No batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan's motor. the fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
- Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module
- Upgraded 5-blade will provide larger air volume, diverting the warm air horizontally all around your house but not give you the hot wind directly. the way making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more
- Silent operation, spread heat around room and increase temperature with low noise, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. more stable and environmental protection
- Recommended surface temperature is between 140°f - 644°f (60°c - 340°c). if the fan doesn't run in time after reaching the temperature, please move the blade slightly (do not touch it directly with your hands. the maximum temperature that the product can withstand is 350-400 degrees. exceeding this temperature may damage the motor. please test the temperature of the fir...
SHOWview product -
Product Highlights
- ♥【ensure warmth】stove fan rotates automatically between 50c (122f)-340c (644f). the hotter the stove and the faster the fan spins, the warmer the air your home gets. the included electromagnetic thermometer monitors the temperature of the furnace.
- ♥【high temperature protection】our heat activated fans have high-temperature protection device. when the appearance temperature rises to around 340c, it gently lifts the front of the thermoelectric fan to protect the teg and motor.
- ♥【non-electric heating】stove fan is an eco-friendly fireplace fan for wood burning stoves. it is powered by thermoelectric technology, and the furnace fan spins automatically as the temperature rises, requiring no batteries or electricity.
- ♥【whispering quiet】the newly designed blades have larger air volume and lower noise. you don't even know the stove fan is there, but you will feel the warmth! you will enjoy the warm air in a quiet and comfortable environment.
- ♥【evenly distributes heat】you just need to put this wood stove fan on the flat appearance of the stove. the dual motor design distributes heat more evenly.
SHOWview product -
Product Highlights
- ≹【rapid warming room】6 blades can generate more warm air than common 5 blade stove fans, provide greater airflow and heat diffusion, warm rooms quickly, circulate hot air efficiently, reduce wood consumption and save oil costs.
- ≹【safe design】the furnace fan bracket is made of anodized aluminum, which can resist high temperatures up to 644f (340c), and will not deform and discolor even after working in high temperatures for a long time.
- ≹【thermal power】fireplace fans are powered by the heat provided by your fireplace or wood-burning stove, no electricity is required, for greater comfort, and use 28% less wood for the stove. distributes heat more efficiently and saves oil, environmentally friendly.
- ≹【low noise operation】the fan noise of this thermal power stove is less than 25 decibels, providing a quiet and comfortable environment. coal, pellet or wood fired stoves use stove fans to enjoy warm air circulation in winter.
- ≹【good thermal conductivity】the fireplace fan with dual motor design has good thermal conductivity and distributes heat more evenly. widely used in wood burning stoves, air stoves, and pellet stoves.
SHOWview product -
Product Highlights
- 【2】the working temperature range is approximately: 60°c~350°c, the higher the temperature, the faster it starts to rotate.
- 【4】upgrade 6 blades fireplace fan – 6 blades heat powered stove fan will provide larger and wider air volume, more efficiency diverting the warm air horizontally all-around your house.
- 【1】this stove fan supplies power by converting the transition into energy without using any batteries or electricity. save money, save energy.
- 【3】low noise operation – this fan comes with larger air volume but lower noise, even you will not feel its presence when the fan is working. the fireplace fan will not disturb you. you can enjoy the warm air in a quiet and comfortable environment.
- 【5】overheating protection for safe: when using stove fans, the temperature cannot exceed 350°c. we have a thermometer to monitor the furnace temperature and we have a heat shield to isolate the real fire from the fan, which will prolong the service life of the fan.
SHOWview product -
Product Highlights
- Whisper-quiet operation: experience warmth in silence! with noise levels less than 45db, our heat-powered fan operates almost silently, even at top speed. you won't even notice it's there, but you'll definitely feel the comforting warmth it provides. enjoy the cozy atmosphere without any disturbances.
- Eco-friendly and energy efficient: our wood stove fan heat powered operates on an eco-friendly principle. it harnesses its energy directly from the heat emanating from your stove surface, making it entirely self-sufficient. with this innovative design, no batteries or electricity are required, reducing your environmental impact while providing efficient heat distributio...
- Heat-resistant and durable: made from heat-resistant materials, our wood stove fan is built to withstand high temperatures up to 345 ° c (653 ° f), ensuring long-lasting durability. the robust construction guarantees that it can handle the heat from your stove without any issues, providing you with a reliable and efficient heating solution.
- Protection structure: the heat fan is equipped with a bimetallic device to protect the fan base. if the surface temperature rises above 250 ℃, please carefully lift the front of the fan to protect the teg and motor. when the surface cool down, the stove fan automatically returns. this not only ensures the safety of users, but also avoids improper usage behavior, thereby...
- Dual motors for powerful heat circulation: equipped with dual motors, this fireplace fan delivers a powerful performance, pushing more warm air than a standard 4-leaves wood stove fan. with a circulation capacity of about 80-170cfm, it's perfect for heating small spaces. the dual motors ensure a broad thermal current, dispersing heat from the stove more efficiently and ...
SHOWview product
Coupon copied
