10 Best
Pex Tubing For Radiant Heats
-
Product Highlights- [visual flow meter]:the water inlet branch is equipped with a visual flow meter type shut-off valve, which can accurately adjust the water flow of each channel and prevent the branch from grabbing water. just open the red cap and turn the red base to adjust the water volume of each channel to 0-5 liters/min. effectively ensure the hydraulic balance of each road.
- [all-copper nickel-plated hexagonal lower joint]: all-copper material, nickel-plated treatment, anti-corrosion and durable, standard 6-point thread, 1/2 adapter, suitable for pert pexd and other floor heating pipes with an inner diameter of 12mm and an outer diameter of 16mm, professional thread sealant, reinforcement + double seal to lock water
- [product parameter]:6 loops,heat can be transmitted 60-90 square meters.1" npt supply and return shut-off ball valves,sus 304 stainless steel cold forming, corrosion resistance, no rust, better sealing, more precise control, the main tube is not demagnetized as a whole, longer life than demagnetization tubes, and higher hardness.
- [auto exhaust valve]:automatic exhaust valve, in a continuous automatic manner, eliminates the air inside when the system is filled with water and during operation.a hygroscopic vent cap prevents accidental drips.
- [easy to disassemble]:each part can be replaced and disassembled separately, the stainless steel body can be used for a long time, the internal space is large, and the flow is sufficient. it is a cost-effective water distributor, which is widely used in floor radiant heating systems, but not suitable for drinking water applications.
SHOWview product -
Product Highlights
- 【all in one】each radiant heat manifold includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valve/manual wheel for supply and return trunks. 1/2 in adapters not included.
- 【product parameter】2 loops with 1 extra drain and cap, 1” fpt supply and return, up to 1.6 gpm high flow meter. compatible with 1/2" tubing outlets, great for radiant floor heat systems.
- 【premium quality】wisewater pex radiant manifolds are made of durable stainless steel material, which is corrosion-resistant and pressure-resistant and has higher thermal conductivity, faster heating and insertion into plastic pipes.
- 【easy for installation】heavy duty stainless steel mounting bracket is included makes it attachable to any wall easily. no pex tools required，just use regular pliers or adjustable wrench to connect pex tubing to the manifold. pressure tested and pre-assembled. simply mount the manifold on brackets and connect valves and pex tubing.
- 【100% satisfaction service】we provide premium quality as well as 100% satisfaction service, please feel free to contact us if you have any question about out product.
SHOWview product -
Product Highlights
- 【high quality】abst pex radiant manifold is made of high-quality 304 stainless steel material, which is wear-resistant, anti-corrosion, pressure-resistant,and has a higher thermal conductivity,transmitting heat more effectively.
- 【auto drain exhaust】there is more gas in central heating,and the use of automatic exhaust and drain valves can effectively remove the gas in the pipe, increase the flow, and improve the heating effect.
- 【product parameter】3 loops,1" npt supply and return shut-off ball valves,up to 1.4gpm high flow meter,1/2" adapters included(6 pcs),compatible with 1/2" pex pipes.
- 【easy to install】the floor heating manifold kit is equipped with a stainless steel mounting bracket, which can fix the water distributor on the wall or the box.simply use regular pliers to install the main on the bracket and connect the inlet and outlet main valves to the automatic exhaust and drain valves. pressure tested and pre-assembled for peace of mind.
- 【pex radiant heat manifold kit】each kit includes flow meter，auto exhaust &drain valve，1/2”adapters，temperature control handwheel，centigrade fahrenheit integrated temperature gauge，inlet&return water valve.
SHOWview product -
Product Highlights
- 【great compatibility】- these radiant heat transfer plates are compatible with most type of 1/2" pex tubing(5/8" od). suit for most brands' pex, pex-al-pex or evoh coated 'oxygen barrier' pipes.
- 【thickness & notice】- 0.016" standard thickness, can be stapled by hand or stapler. straight-shaped design, reduce thermal voids that occur from gaps between plates & tubes.
- 【premium plates kit】- amount: 100pcs; material: aluminum; length: 4ft; width: 4"; good quality product to provide better heat transfer function for radiant floor system.
- 【effortless install】- typically installed in radiant system of under-floor (between joist) type, sandwich type, above sub-floor(sleeper), wall & ceiling. leave 1-2" spacing between plates when assembling. cuttable design to meet different needs.
- 【wide application】- perfect to improve heat transfer of the system and lower the needed water supply temperature. power-saving product to use at home, apartment, hotel etc.
SHOWview product -
Product Highlights
- Versatile compatibility: these 4x0.3 ft (1200x100 mm) heat transfer plates are suitable for 3/4'' (19.05 mm) pex pipes, including pex-a, pex-b, pex-al-pex pipes, with an id of 0.681'' and od of 0.685''. before purchasing, make sure to check the dimensions of your plumbing pipes.
- Durable quality: these heat transfer plates are made of 0.016'' (0.4mm) thick pure aluminum, which is waterproof, corrosion-resistant, and provides efficient heat transfer. they remain unaltered and can last up to 20 years.
- Even heat distribution: tired of the winter chill? this unique u-shaped heat transfer plate is designed to snugly fit with pex pipes, ensuring even heat distribution across the entire radiant floor. it can reduce heat loss by 30%-40%, maintaining a stable room temperature for your comfort throughout the winter.
- Easy installation: choose from two installation methods based on your floor structure. remember to wear gloves and remove the protective film from the heat transfer plate surface before installation to ensure optimal heat transfer. leave a 1-2 inch gap between two heat transfer plates for long-term stability. you can also trim the plates to your desired length for effor...
- Wide applications: you can install these pex heat transfer plates in various radiant heating systems, including between floor joists, sandwiched between layers, or above subflooring (over sleepers). they are suitable for use in living rooms, bedrooms, study spaces, and other wooden-framed or wooden-floored homes with plumbing pipes.
SHOWview product -
Product Highlights
- Versatile compatibility: these 2x0.3 ft (600x100 mm) heat transfer plates are suitable for 3/4'' (19.05 mm) pex pipes, including pex-a, pex-b, pex-al-pex pipes, with an id of 0.681'' and od of 0.685''. before purchasing, make sure to check the dimensions of your plumbing pipes.
- Durable quality: these heat transfer plates are made of 0.016'' (0.4mm) thick pure aluminum, which is waterproof, corrosion-resistant, and provides efficient heat transfer. they remain unaltered and can last up to 20 years.
- Even heat distribution: tired of the winter chill? this unique u-shaped heat transfer plate is designed to snugly fit with pex pipes, ensuring even heat distribution across the entire radiant floor. it can reduce heat loss by 30%-40%, maintaining a stable room temperature for your comfort throughout the winter.
- Easy installation: choose from two installation methods based on your floor structure. remember to wear gloves and remove the protective film from the heat transfer plate surface before installation to ensure optimal heat transfer. leave a 1-2 inch gap between two heat transfer plates for long-term stability. you can also trim the plates to your desired length for effor...
- Wide applications: you can install these pex heat transfer plates in various radiant heating systems, including between floor joists, sandwiched between layers, or above subflooring (over sleepers). they are suitable for use in living rooms, bedrooms, study spaces, and other wooden-framed or wooden-floored homes with plumbing pipes.
SHOWview product -
Product Highlights
- Helps distribute the heat evenly throughout your radiant heat flooring
- All of the heat plates are proudly made in the u.s.a. manufactured with high quality aluminum.
- Compatible with all types and brands of 1/2" pex tubing (5/8" od) pex-a, pex-b, pex-c
- Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills.
- High grade aluminum plates
SHOWview product -
Product Highlights
- Great compatibility: these radiant heat transfer plates are compatible with most type of 1/2" pex tubing(5/8" od). suit for most brands' pex, pex-al-pex or evoh coated 'oxygen barrier' pipes.
- Thickness & notice: 0.016" standard thickness, can be stapled by hand or stapler. u-shaped design, reduce thermal voids that occur from gaps between plates & tubes.
- Premium plates kit: amount: 200pcs; material: aluminum; length: 2ft; width: 4.25"; good quality product to provide better heat transfer function for radiant floor system.
- Effortless installtion: typically installed in radiant system of under-floor (between joist) type, sandwich type, above sub-floor(sleeper), wall & ceiling. leave 1-2" spacing between plates when assembling. cuttable design to meet different needs.
- Wide application: perfect to improve heat transfer of the system and lower the needed water supply temperature. power-saving product to use at home, apartment, hotel etc. number of plates = square footage x 1.30 / length of plates. example: 1000 square footage: area multiply by 1.30 = 1300ft of plates. (650 plates of the 2ft version or 325 plates of the 4 ft version)
SHOWview product -
Product Highlights
- Flexible pex pipe: line expands and contracts with temperature changes and is freeze resistant; ideal for hot and cold potable water distribution, fire protection and municipal water service lines
- Certified: soft pex tubing is certified to meet astm f2023 oxidative-resistance requirements for continuous hot water recirculation; approved for water service lines and burial applications including being buried under concrete
- Pex tubing: flex pipe plumbing provides a faster installation time compared to rigid pipe, and is flexible enough to bend pipe around corners; pex pipe roll is chlorine and uv resistant
- Versatile: pex piping is compatible with sharkbite evopex fittings, sharkbite universal push to connect fittings (asse 1061), plastic barb fittings (astm f2159) and brass barb fittings (astm f1807)
- Specs: plumbing supplies feature a minimum working temperature of 33 degrees f at160 psi, and a maximum working temperature of 200 degrees f at 80 psi; maximum working pressure of 160 psi at 33 degrees f to 70 degrees f
SHOWview product -
Product Highlights
- Unmatched compatibility & weatherproof : with a compatibility range from -40°f to 203°f (-40°c to 95°c), our al pex tubing can handle extreme temperatures, ensuring secure use in both scorching heat and freezing cold. it can be easily installed with different connection systems, making it compatible with a wide range of residential and commercial applications.rust our p...
- Get ready in 3 simple steps: installing our aluminum-plastic composite pipe is a breeze, and you'll have it up and running in no time! step 1: prepare your tools. step 2: attach nuts and snap ring connector. step 3: tighten the nuts, please note that hardware is not included. you don't need to be a plumbing expert to install our pex-al-pex tube. just follow these 3 simp...
- High-quality materials, lasting performance: when it comes to durability and reliability, our al pex tube is second to none! crafted from top-notch pex and aluminum materials, our pipe can withstand cracking, leaks, and corrosion. it's built to last, ensuring long-lasting and dependable performance. say goodbye to frequent maintenance!
- Handle any surface with ease: designed with a 5/8''(16 mm) exterior diameter and 0.08'' (2 mm) wall thickness, our al pex pipe has a exceptional bend radius and smooth inner wall for excellent elasticity and high-pressure resistance, which adapts to different ground conditions, avoiding pipe breakage or cracking. its flexibility makes it easy to bend, cut, and even inst...
- Versatility at its best: our al pex radiant heat tubing has a total length of 656 ft/200 m, can be used with tee fittings for installation with different connection systems and floor types, such as hot and cold water plumbing systems, indoor gas piping systems, and solar air conditioning piping systems. ideal for both residential and commercial purposes, such as radiant...
SHOWview product
Coupon copied
