10 Best
Plasma Arc Cutting Equipment
-
Product Highlights- Plasma cutting torch consumables are made of metal +glass fiber , durable and not easy to wear
- Package including:10pcs electrodes ,10pcs nozzles(tips) ,1pcs shield cups,1pcs brackets,1pcs swirl ring
- The ipt65 consumables suitable for ipt65 plasma cutting torch,ideal for cut60dn and etc plasma cutter
- Non-hf pilot arc plasma cutting torch consumables
- Timely replacement of accessories will help you maintain the machine and ensure the cutting performance
SHOWview product -
Product Highlights
- Applicable this accessory kit is suitable for wp17 wp18 wp26 welding torch, can directly the old ones, with good compatibility.stable and performance, practical, easy to operate and use, a long service life.
- Compatibility: welding consumables are suitable for wp17 wp18 wp26 , can directly the old ones, good compatibility.
- Material: these are made of copper, ceramic and other materials, with good conductivity.
- These are made of copper, ceramic and other materials, with good conductivity, corrosion resistance and wear resistance.
- Size with fine workmanship, these welding consumables are of reasonable size, easy to install and replace, and easy to operate. it only takes a few steps to the work.
SHOWview product -
Product Highlights
- [digital screen display]: the screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. if plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
- [cutting thickness]: adopting advanced igbt inverter technology, 50/60hz high-frequency pilot arc plasma, dual voltage 110/220v, 60% duty cycle. current display at 110v is 15-35a, under 220v current display is 15-50a, the maximum cutting thickness is recommended to be 12mm @ 35a 110v, 50psi; 16mm@50a 220v, 60 psi.
- [pilot arc function]: btc500dp 7th plasma cutter has the pilot arc function. it is a high frequency non-touch arc starting mode. the torch head does not need to touch the metal plate. added pa adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
- [sensor of air pressure & air compressor]: inside of machine have sensor of air pressure, user can adjust the air pressure through the regulator. the air filter is installed at the rear of the machine with a quick air connector 1/4 npt, which can be used after opening the box. users can use it after connecting to the air compressor. recommended air compressor air pressu...
- [pt/2t/4t/pa function]: post time function, with an adjustment range of 3-15 seconds. adjust the cooling time of the torch head to extend the service life of consumables. generally speaking, we recommend a cooling time of 4-8 seconds. 2t/4t automatic cutting release your finger. 2t is semi-automatic cutting control, and 4t is automatic cutting control. pa adjust the tim...
SHOWview product -
Product Highlights
- All safety no heat: the unique air channel design increases the heat dissipation of the power device. the igbt inverter will greatly improve the performance of the plasma cutting machine. the outstanding 30%@104 °f, 50a; 60%@104 °f, 33a; 100%@104 °f, 25a duty cycle can also ensure long-time cutting.
- Sharper than sharp: the gastight air filter regulator allows you to quickly connect to your air compressor. it can lower or maintain air pressure to reach effective cutting. and you can cut through rough, painted, and rusty surfaces while producing minimal slag without any air leakage.
- Non-touch pilot arc: pilot arc technology allows you to cut without touching the tip of the metal. this plasma cutter pilot arc delivers a consistent and precise current to the cutting surface with better cutting quality and longer consumable life. ideal clean cut: 1/2"(12 mm). maximum severance cut: 5/8"(16 mm).
- 50amp premium cutter: use non-hazardous compressed air to cut aluminum, stainless steel, mild steel, copper, and other metals. suitable for a wide range of applications, including sheet metal fabrication, light industrial, automotive repair, plumbing work, and other maintenance services. you'll be prepared to take on any challenge!
- More than you expected: the extra long 16.4' plasma torch and 6.56' ground clamp with cable offers maximum convenience by extending your working area. quit wasting time searching for an extension cord and adapter. the kit also includes an air regulator, air hose, 4 hose clamps, 2 cable racks, and some consumables.
SHOWview product -
Product Highlights
- Portable & easy set up - due to the compact size, shape, ergonomically friendly handle, and lightweight (8kg) nature of this plasma cutting machine, you are able to create your very own art work and use it virtually anywhere. can be widely used in repairing work, metal processing, site work, etc., and also suit for the home diy hobby, workshop to the industrial shipyards.
- Ce certified & security - pilot arc ignition plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation. automatically adapts to 220v±15% input power, capable of operating when the external air pressure is too high, uses non-hazardous compressed air to cut.
- Non touch pilot arc ignition plasma cutter - with stable and mature igbt inverter technology, energy-saving 50%, 60% high duty circle, max 50amp output current, lcd digital display to easy control of voltage and current for effective operation.allowing cutting without the tip touching the metal, extending the life of consumable parts.
- Cutting technic - this plasma cutter cuts with ideal clean cut 10mm, maximum 15mm severance thickness, cut steel plate, alloy steel, mild steel, copper, aluminum and its alloys, and cast iron with a smooth cutting surface and the pilot arc cutting torch effectively cuts rough, painted, and rusty surfaces and creates minimal slag.
- Customer support - 90-day money-back guarantee, which will not cause you any loss. giving the power to create your very work, this plasma cutter will save both time and money. please feel free to contact us, our professional customer support is always here for you!
SHOWview product -
-
-
Product Highlights
- 【non-touch pilot arc】plasma cutters easily cut rough, rusty surfaces without touching the metal, produce minimal slag and cut more efficiently by eliminating the need to cut from the edge.
- 【cutting technology】the plasma cutter ideals cut cleanliness of 10mm, maximum 16mm severance thickness. widely cut stainless steel, carbon steel, aluminum, copper, titanium and other metal materials with fast cutting speeds and smooth cutting surfaces.
- 【buy with confidence】package includes aic45 plasma, xt45 non-hf cutting gun, ground clamp, air filter and pressure regulator accessories, xt45 consumables. aixzglobal provides 2 years warranty for our brand products, if there are any questions, please feel free to contact us.
- 【non high frequency start】aic45 cutter is equipped with xts45 low-frequency cutting gun, which is easier to start the arc, higher cutting success rate, no interference with the power supply and harmless to human health.
- 【igbt & 2t/4t】this plasma cutting machine adopts stable and mature igbt inverter technology, dc output current 20-45a, 50/60hz, duty cycle 60%, lcd digital display can easily control current and 2t/4t mode through the display to meet your needs and choices.
- 【lightweight & applicable】our upgraded compact plasma cutting equipment is easy to carry with a handle. weight 5kg. dimensions: 28x12x25 cm. it is suitable for home diy hobbies, repair work, metal fabrication, fieldwork and more.
SHOWview product -
Product Highlights
- Ptm60 plasma torch standard cable length:20ft
- 60amps ptm60 ideal for cut60dn plasma cutter,use ipt60(ptm60) consumables.
- Ptm60 (iptm60) non-hf pilot arc straight torch body replacement.recommended post flow: 55sec;duty cycle: 60%
- The blow back plasma cutter torch head work with cnc,1+4 link for pilot arc; 3+5 for torch switch; 8+9 for shield cup in place(torch protect).
- Ptm60 plasma cutting torch with 4 pin male adaptor.please make sure that your plasma cutter is central adaptor, and confirm the parameters of your plasma cutter to ensure that they are compatible.replacing the cutting torch at the appropriate time will improve the cutting effect
SHOWview product
Coupon copied
