6 Best
Powertec Miter Saws
-
Product Highlights- Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while with quick and accurate project results
- Multi-track miter fence: smooth, built-in laser engraved measuring scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex bots, 1/4” t-bolts and 5/16” t- bolts, and t-track accessories
- Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop
- High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30°and 45°and nine others, both left and right (works in standard 3/4” x 3/8” miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8” miter slots.), built-in
- Miter saw flip stop: delivers exceptional cut-length control, with a toolless locking mechanism and adjustable settings to quick change to the left or right side of the blade
SHOWview product -
Product Highlights
- The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. the positive stops are perfect for many woodworking projects as they are the angles that are typically used.to adjust the head you simply loosen the post knob handle, pull the spri...
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. the fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. the off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height m...
- The fulton miter gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.the aluminum miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. also included is a handy aluminum flip stop for repetitive angled cuts on your table sa...
- The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. standard miter slots are 3/4” x 3/8” with a 1/8” “t” slot (slight variances from brand to brand) running the length on the bottom of the slot. the steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of ...
- Both ends of the fence are cut at exactly 45 degrees. this allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. the fence comes with a flip stop that makes repetitive cuts a breeze. when not in use the flip stop can be flipped up and out of the way. also include are tw...
SHOWview product -
Product Highlights
- Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while with quick and accurate project results
- Multi-track miter fence: smooth, built-in laser engraved measuring scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex bots, 1/4” t-bolts and 5/16” t- bolts, and t-track accessories
- Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop
- High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30°and 45°and nine others, both left and right (works in standard 3/4” x 3/8” miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8” miter slots.)
- Miter saw flip stop: delivers exceptional cut-length control, with a toolless locking mechanism and adjustable settings to quick change to the left or right side of the blade
SHOWview product -
Product Highlights
- Application: a necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw
- Versatility: the top mounting holes are 3" on center, while the side mounting holes are 3” on center - providing you with a host of mounting options
- Includes: (2) jig and fixture bar with a set of 10-32 nylon adjustment screws (mounting hardware) (1) t-track flip fence stop (3 inches) with 5/16" t-bolt
- Functional design: features 6 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 6 tapped holes (10/32") on the side – all holes are clean and burr free
- Quality build: this miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability.function: creates optimized fence-top setups in your universal t-track assemblies, allowing you to set them to your desired measurement requirements and make repetitive cuts and drills without remeasuring.
SHOWview product -
Product Highlights
- Function: with this telescopic extension fence, you can achieve accurate miter cuts on the table saw or router table. fence telescopes from 17 inches to a full 34 inch length
- Versatile: accommodates a wide range of miter gauges and flip stops including powertec 71142, 71143, 71767. if using other miter gauges, please note that the fence mounts to the face of the miter gauge with t-bolts. the center line of the t-slot is 1-11/16” from the bottom of the fence. please check your miter gauge to verify that it will fit.
- Includes: (1) telescoping fence, 3”x 1- 3/8”x 17” with a 3” end that extends 17”, extendable to 34" max
- Features: the fence is equipped with a high quality 12" movable scale. calibrate the scale by using the corner edge of the flip stop (not included) to identify the alignment point. tighten the adjustment knob on the flip stop to secure in place
- Premium grade: made of solid aluminum with hardened anodized surface, making the fence strong, durable. it also provides a smooth, surface that is easy to clean
SHOWview product -
Product Highlights
- Function: provides you with an easy diy kit that includes a t-track for mounting flip stops and fixtures, a premium 3” flip stop, blade guard and hardware needed to cut boards to precise lengths while preventing measuring and cutting errors
- Premium quality: the t-track included in this kit is made of solid extruded aluminum and the miter bars are crafted with high durability, high stability hdpe (high density polyethylene)
- Includes: 24” universal t track, 19” hdpe miter bars, 3” flip stop, blade guard, flat head wood screws, hex head bolts and nuts
- 100% safe: makes crosscutting safer, more efficient and convenient, while avoiding risking your limb when crosscutting smaller pieces with a crosscut sled specifically calibrated with your table saw
- Dimensions: universal t-track (24" long) | high density polyethylene bars 19" long x 3/4" x 3/8" | 3" flip stop | flat head wood screws #6 x 1/2" | 1/4"-20 x 1/2" hex bolts | 1/4"-20 acorn hex nuts
SHOWview product
Coupon copied
