10 Best
Slow Closing Toy Box Hinges
-
Product Highlights- Keep lid stay open — the lift and up hinges will hold the lid opened until you want to close. lids will go down slowly and gently to avoid slams shut and crush the little fingers of kids. good gift fit for the kids' toy box and chest. it's widely usage as slow close hinges for toy boxes, chest hinges, also fit for overhead kitchen cupboard, cabinet hinges too.
- Easy to install important：refer to our install picture ! — the safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. keep the soft close hinges installed for 75°-105° adjustable opening angles, depending on actual situation. it can fit for most lids.
- Gentle slow close hinges — hinges for wooden box and soft close lid support. especially excellent slow close and safety solution on chest hinges, toy box hinges, locking hinges.
- Small compact design — the lid closer compact design allows for installation in tight fit areas, and the lid to open at a maximum 105 degree angle. weight capacity: 0-20lb/1pc, 0-40lb/2pcs. perfect for any lids or flaps when lid support soft close is required.
- Service guarantee — if you are not satisfied with your purchase for the toy box hinges soft close any reason,please contact us. we endeavor to uphold any exceptional services that you have come to expect from us.
SHOWview product -
Product Highlights
- Finger savers: lid support hinge can be adjusted to 0-180°with hexagonal wrench. they are soft closing with adjustable friction pressure, so that it doesn't slam closed, and weighing up to 35lbs.
- Smooth operation: works good for holding open cabinet door and toy box, and these heavy duty hinges can really hold up the lid so it will not smash fingers. it is recommended to tighten hinge to make sure it doesn't drop too fast.
- High quality material: made of high quality zinc alloy, more stronger corrosion resistance and durability, to ensure that the lid hinge has high functionality. which provides you with a long-term service.
- Easy to install: instructions were graphic with dimensions and text description, so if you measure its placement accurately, it will work fine. before again, only need to trace the points for quick installation.
- Intimatest service: customers’ satisfaction is our top priority. we provide 360 days free replacement, if you have any question about our soft close cabinet hinge, please feel free to contact us and we will reply within 4 hours.
SHOWview product -
Product Highlights
- Holds lid opengas struts heavy duty soft close lid stays will hold your lid open until you push it down. never worry again about having to prop the lid open
- Easy install instructionseasy to follow installation instructions ensure a perfect install the first time! lid stay can be installed on either the left or the right side.this gas springs chest hinges is deal for upward opening flaps, such as toy boxes and wooden boxs, vertical cabinet doors and storage box, cabinetry,vanity lids,trap door,storage chest,tool box
- Safety & soft closekeep the lid approximately suspended, making it easy to open and close even heavy duty lids, soft close lid support hinges is a safety solution for toy box lid and wooden box, lids will lower slowly and gently to avoid smashing fingers
- Heavy duty gas struts - 20n-200n heavy-duty gas struts may be supported maximum 40lbs lid and gently lowered; 2 x 200n heavy gas struts may support maximum 80 pounds of the lid.20n=4lbs
- Multipurpose lid support hingethese elegant form of support hinges are well made and designed to support the lids of small box, such as toy box,cabinet,closet,wardrobe lids,the arm with graceful body curve adds classic luxury to your furniture.
SHOWview product -
Product Highlights
- Gentle slow close hinges — hinges for wooden box and soft close lid support. especially excellent slow close and solution on chest hinges, toy box hinges, locking hinges.
- Small compact design — the lid closer compact design allows for installation in tight fit areas, and the lid to open at a maximum 105 degree angle. weight capacity: 6-12lb/1pc, 15-25lb/2pcs. perfect for any lids or flaps when lid support soft close is required.
- Keep lid stay open — the lift and up hinges will hold the lid opened until you want to close. lids will go down slowly and gently to avoid slams shut and the little fingers of kids. good gift fit for the kids' toy box and chest. it's widely usage as slow close hinges for toy boxes, chest hinges, also fit for overhead kitchen cupboard, cabinet hinges too.
- Easy to install important：refer to our install picture ! — the hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. keep the soft close hinges installed for 75°-105° adjustable opening angles, depending on actual situation. it can fit for most lids.
- Thank you for purchasing,if you have any questions, please leave message, i will reply you in time.
SHOWview product -
Product Highlights
- Durable material: heavy lid hinge, with maximum bearing capacity of 50 pounds/2 pieces. the upgraded version has the advantages of strong bearing capacity and metal connectors replacing plastic clips. made of high-quality zinc alloy, it has maximum corrosion resistance and durability. the chest slowly closes the hinge to ensure high performance.
- Adjustable tension: use an allen wrench to adjust the soft closing tension of the toy box hinge to adapt to the different weight of the lid. after installing the wooden case lid hinge, screw the mechanism into the allen key hole in the middle of the arm to set the appropriate pressure to prevent the lid from slamming.
- Keep the lid open: the soft closing hinge keeps the lid open until you want to close it. the air strut is used for similar purposes, but it will not lift itself, but stay and support the cover at the position you want. it is widely used as wooden box hinge, such as toy box hinge, box hinge, bench hinge, and also applicable to elevated kitchen cabinets. it is very suitab...
- Easy to install: the lifting hinge can be installed on the left or right side, and can also be used for side and top mounting. the door opening angle is adjustable at 75 °, 90 ° and 110 °. it works with most lids, allowing you to keep the lid at any angle. just mark the two holes and tighten each mounting bracket. no need to use the chart on the package!
- Conditional soft closing: only when the chest hinge support is less than 50 pounds and the two covers are supported under the same tension through your adjustment can the soft closing function work perfectly! the safety hinge will be lowered slowly to prevent finger injury.
SHOWview product -
Product Highlights
- ►material, zinc alloy: the 200n lid support hinges are made of high quality material--zinc alloy, it is stable, will last for years.
- ►applications: this soft close lid support hinge can be use for toy box lid support, storage box lid support, cabinet lid support, plywood box lid support. but please notice that this hinge (2 pics 200n heavy duty hinges will not fit within a 9" closed lid height, must with a 9 inch clearance.
- ►practical safe lid stay: this hinge use a safety soft close design, which will protect your and your kids finger and avoid the noise and startle caused by box lid instant shutdown. this safe lid stay hinge is very practical, providing a quiet, safe and clean home environment for your family.
- ►200n heavy-duty, 75-90 degree open angle: minimum weight support--15lb (per strut), max weight support--30lb(2pcs). the 200n heavy duty gas struts fit the box which inside depth should not be less than 9 inch. open angle is 75-90degree.
- ►easy to use: easy to install, comes with 2 pack, screws included in package for installation. and about the adjust the soft close, please tighten the mounting screw until the lid closes properly.and then gently start closing the lid and allow it to finish on its open. forcing the lid down quickly will result in the lid not closing properly. and if you have any question...
SHOWview product -
Product Highlights
- Holds lid opengas struts heavy duty soft close lid stays will hold your lid open until you push it down. never worry again about having to prop the lid open
- Easy install instructionseasy to follow installation instructions ensure a perfect install the first time! lid stay can be installed on either the left or the right side.this gas springs chest hinges is deal for upward opening flaps, such as toy boxes and wooden boxs, vertical cabinet doors and storage box, cabinetry,vanity lids,trap door,storage chest,tool box
- Safety & soft closekeep the lid approximately suspended, making it easy to open and close even heavy duty lids, soft close lid support hinges is a safety solution for toy box lid and wooden box, lids will lower slowly and gently to avoid smashing fingers
- Heavy duty gas struts - 100n heavy-duty gas struts may be supported maximum 20lbs lid and gently lowered; 2 x 100n heavy gas struts may support maximum 40 pounds of the lid.
- Multipurpose lid support hingethese elegant form of support hinges are well made and designed to support the lids of small box, such as toy box,cabinet,closet,wardrobe lids,the arm with graceful body curve adds classic luxury to your furniture.
SHOWview product -
Product Highlights
- Soft close hinges: this lid hinge can help open/close your kitchen overhead cabinets or toy box slowly to prevent from slaming or bumping.
- Applications: this gas spring lift is suitable for various kitchen cabinets, toy box, trunks and rv cabinets and so on.
- 100n gas shocks: bearing weight: 100n / 22lb (per strut), 4 struts included. length (hole center to hole center) :10.63 inch, travel length: 3.62 inch.
- Stable & rust protection: quality hinge head and better piston make lid support bracket work steadily. copper core and zinc plating prevent it from rusting. complete with fixing screws and installation diagram so you can install it with no effort.
- 1 year quality warranty: naierdi offers 1 year 100% satisfactory warranty. if there's a product quality issue or installation problems, please feel free to contact us. we will refund or replace your order to provide a best solution!
SHOWview product -
Product Highlights
- ∆【easy to install】easy to install, you just mark the location where you want to install with a pencil and then use a screwdriver or drill to twist the screws and fix the hinges in the installation location.
- ∆【package includes】you will get 2 pieces gas spring hinge with some installation screws.
- ∆【high quality】gas spring hinge is made of galvanized copper core, not easy to rust, not easy to deform, durable and practical, long service life. the gas dampers softly lower the drop-down rate of door to prevent quick and dangerous descent.
- ∆【widely used】suitable for kitchen cabinet doors, display table, cabinets, toy box or storage box and etc. pressure: 120n, load bearing: 26lb, extendable length: 0-90mm, total length (approx. ): 200mm/7.8". the maximum angle is 100 degrees.
- ∆【satisfaction guaranteed】we provide excellent customer service to all customers who purchase our products. if you receive a defective product or have any questions about our products, please do not hesitate to contact us.
SHOWview product -
Product Highlights
- Lid stay slow closing -- lid stay support built-in hydraulic dampening device. doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas. the lid hinges supports opening the lid at a maximum angle of 105 degree.
- Sturdy lid stay with soft close-- installation detail information can be downloaded in amazon page. the lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, height 18-19 inch.
- Keep lid hinge stay opening, wide usage -- never worry again about having to prop the lid open. this lid support will hold the lid open until you are ready to close. this lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
- Easy to install lid support-- easy to follow installation instructions ensure a perfect install the first time! lid stay can be installed on the left or on the right.
SHOWview product
![NAIERDI [4 Pack] Lift Support,Gas Strut,Soft Close Hinges,100N/22lb Gas Spring, Lid Support, Kitchen](https://m.media-amazon.com/images/I/41APha7+uuL._SL500_.jpg)
Coupon copied
