10 Best
Stabilizers
-
Product Highlights- Coolflex achilles pad and tongue offers comfort and breathability.
- Bilateral design so each size will fit left or right foot and low profile to fit in any type of shoe
- Stabilizing straps form a complete figure-eight to protect and support ankle. woven elastic cuff closure enhances support and secures laces and stabilizing straps
- High quality nylon boot provides superior durability and strength
- Each ankle brace is sold separately and is for single patient use only
SHOWview product -
Product Highlights
- Easy to use: continuous roll of topping allows for user-controlled piece length. place appropriate piece size on top of your design and allow guide stitch to tack it down. upon completion remove excess topping by hand. the remaining pieces will dissolve in water.
- Mutliple uses: other uses besides as a topping. can also be used as a stabilizer for washable projects requiring complete stabilizer removal. perfect when you need just a thin layer under your design - add layers for extra support.
- Professional finish: use as topping to prevent stitches from sinking and showing through design. ideal for fabrics with texture - towels, velvet, corduroy, polar fleece. etc. creates clean and visible stitching that doesn’t sink in and get lost.
- Completely dissolves: water soluble film easily and completely dissolves in water. embossed texture allows for easy handling and quicker dissolve time.
- Reduce costs: roll size offers significant savings for your projects.
SHOWview product -
Product Highlights
- 【note】this product does not include the steel wire section. suitable for single-direction steel wire adjustment and cannot solve vertical direction adjustment. the results may vary, it might not be suitable for those steel wires that are highly curved.
- 【size】steel pipe has a length of 50mm, with a diameter of 4mm.
- 【features】this product is suitable for repairing the bending of the keyboard satellite shafts steel wire, correcting the accuracy of the steel wire, and the satellite axis pad included is suitable for pcb satellite shafts and steel plate satellite shafts. it adopts poron material with soft bottom and back glue, which can be removed with tweezers and used to fill the gap.
- 【compatible】suitable for all sizes of keyboards satellite shaft steel wire.
- 【include】steel pipes (corrector) * 2 , steel wire storage box * 1, satellite shaft faux pads * 20 , anti-skid and anti-cutting protection covers * 2
SHOWview product -
Product Highlights
- Pcb-mounted: mount our screw-in stabilizers directly into your keyboard pcb with the included screws. this is the most stable mounting style because it is the most secure and offers less vibration.
- Wobble-free keys: our stabs are designed to stabilize and prevent larger keys from rattling. you can follow our detailed step-by-step assembly to help guide you on how to put in your screw-in stabilizers.
- Diy keyboard must-have: c3 equalz x the key company v3 screw-in stabilizer set comes with 5 pairs of white housing, 5 pairs of white stems, 6 silver wires, 10 screws, 10 washers, and stickers for sound dampening.
- Custom keyboard kit: keys that are larger than 2u require stabs. on a typical tenkeyless or tkl mechanical keyboard, you’ll need one for your spacebar, enter, backspace, and shift keys.
- Perfect pairing: our new soulmate stab films kit is included in every v3 keyboard stabilizer kit. it's the perfect pairing for your stabs, letting you tune to the sound profile you're looking for.
SHOWview product -
Product Highlights
- The v2 outer casing wire holding clasp made to prevent stripping of the wires, different from regular cherry pcb mount stabilizers and others.
- Polymer nylon outer casing-- higher hardness, gold-plated stainless steel wires and screws-- oxidation resistance.
- Durock v2 pcb mount stabilizers are with new non-stripping wire design, fits for mx-compatible pcbs.
- Transparent housings and the golden wires set gives your board a clear and golden edge.
- Pre-clipped insert method, no need to clip the feet. fit for 60% and 80% keyboard set. ( washers, 6.25u and 7u wire included )
SHOWview product -
Product Highlights
- ▶best used on light colored fabrics: our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. it eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. it is perfect for chest logos, pique knits, polo shirts, t shirts, infant items, micro fiber apparel, si...
- ▶tips for denser stitch designs: for heavy stitches, denser designs or thicker fabrics, you can put one layer of light weight tearaway stabilizer underneath of no show mesh stabilizer for extra stability, then hoop and stitch together. after the design is completed, the tear away stabilizer can be torn off and just leave the soft mesh against the skin.
- ▶not only cutaway stabilizer: this is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to sulky soft'n'sheer, weblon, oesd polymesh)
- ▶how to use: it is light weight no show mesh stabilizer. for the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. one layer can be strong enough to produce best “no show” results.
- ▶safe material: it is made of 100% embossed nylon which is acid free and lead-free, safe and extremely soft to use it on your skin-touch clothes (use with any woven where softness is a consideration). the unique design of embossing can add multi-directional stability for your design.
SHOWview product -
Product Highlights
- The v2 stabs stem / sliders are pre-clipped design, do not require any clipping for fast & easy set up.
- Translucent smokey v2 housings and the gold-plated wires set gives your board an elegant and golden edge.
- Durock v2 stabilizers are pcb mount screw-in stabs that feature a patent design and precision upgrade models to avoid wire drop out.
- Well selected premium polymer nylon housings, all the stainless steel wires and hardware are sourced from korea and with real gold coating.
- Durock stabilizers v2 compatible with pcbs that use "screw-in" or "pcb mount" stabilizers. ( washers, both 6.25u and 7u spacebar wire included )
SHOWview product -
-
Product Highlights
- The v3 stem/slider is pre-clipped, smaller wire gap and creative elastic support base to minimize the wire wobble and noise.
- Durock plate mounted stabilizers v3 are produced by precision molds with premium pom and pok materials to achieve the best performance.
- Durock v3 plate mount stabilizer is with innovative design on both housings and stems which makes it more stable, quiet and compatible.
- The upgrade angled snap / buckle of durock v3 housings makes it compatible with the thinnest plates up to 1.2mm.
- Durock v3 plate keyboard stabilizer kits fit for most of cherry mx style clip in plates. some customized plates may not be applicable due to different corner edge cutting technique.
SHOWview product -
Product Highlights
- Moving low angle filming -- ideal for making moving low angle videos and images.
- Stability -- great for skateboarding, rollerblading, motor racing, biking, surfing, hunting, snowboarding, skiing and any extreme sports situation where stability is essential.
- Nice gift -- ideal filming accessory for birthday party, honeymoon, home, travel, banquet to record the happy and unforgettable moments. a nice gift for your friends and family.
- Wide compatibility -- works with all cameras and camcorders with a national standard 1/4-20 thread interface.
- Lightweight and comfortable -- cushioned nbr padded handle alleviated the stress of lengthy filming.
SHOWview product
Coupon copied
