10 Best
Vacuum Oil Extractors
-
Product Highlights- All-in-one kit: pop the package and find a treasure trove of tools – a 4 gal/15l tank, a main tube, a dipstick, two extension tubes, a liquid suction hose, two sealing rings, and a user manual that gets you going. this oil extractor pump handles all sorts of fluid extractions.
- Convenient usage: think less, do more with our four-step fluid swap. grab a tube, ditch the dipstick, pump it out, and pour it off. our oil change pump is a clean, green, engine-changing dream that keeps your hands clean and your engine keen.
- Dual-mode mastery: our fluid extractor adapts to your needs with pneumatic and manual operation modes. the pneumatic mode provides higher speed for increased work efficiency, while the manual mode can function without the fuss of extra gear, which is simple to operate and convenient.
- Thorough fluid extraction: 15l vacuum fluid extractor comes with four sizes of suck-it-all-up oil extractor tubes, you're reaching the deepest depths, leaving tanks dry. main tube: 9.8" x 39.37" / 249 x 1000 mm; extension tube 1: 0.28" x 47.24" / 7 x 1200 mm; extension tube 2: 0.24" x 47.24" / 6 x 1200 mm; suction hose: 0.31" x 58.27" / 8 x 1480 mm.
- Fluid freedom: engine oil, gear oil, power steering fluid, or brake fluid – our oil pump extractor is perfect for extracting various types of liquids. wherever you are, whatever you drive, from the car, motorcycle, or yacht to the lawnmower or tractor, we're your go-to gadget for a quick fluid flip.
SHOWview product -
Product Highlights
- Suction probes: ø4, ø6, ø8, ø10,and 1pc of ø4 brass probe.fluid temperature range : 35°f- 200°f.
- With non-slip handle, portable and very handy.
- This oil suction pump has a capacity of 9 litres and with 4 probes. oil change pump is ideal for many types of non-explosive liquids such as water and soluble oil, for use on most vehicles and machines.
- This oil changer pump is ideal for other liquids such as water and soluble oil, use for most vehicles and machines.
- Package includes: 1 x suction pump; 4 x hoses(90cm length): 4/6/8/10 mm(the largest hose can be connected with any of the other hose, so you can get a 180cm long hose); 1 x measuring probe 4 m, 1 x instructions.
SHOWview product -
-
Product Highlights
- 【speedy extraction】fast extraction speed of 1.8l /min. the oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.
- 【easy to use】with four uncles oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. just simply open the hook and insert tube to change engine oil.
- 【2 way usage】pneumatic and manual mode to fit any condition. the pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
- 【no oil left】vacuum fluid extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. the fluid extractor can be used to remove fluids from engine oil to brake fluids. it has a 6.5l reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.
- 【work freely】not limited to places, change oil anytime, anywhere. perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers.
SHOWview product -
Product Highlights
- Specifications: fluid temperature range: 35°f- 200°f/1°- 95°c; polypropylene hose diameter: 4mm / 6mm / 8mm / 10mm (0.157"/0.236"/0.315"/0.393"); tank capacity: 7l; actual capacity 6.5l; working pressure: 70-170 psi.
- Wide application: the 7 liter oil extractor is constructed from composite materials and suitable for the extraction of all types of engine and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. the oil extractor pump is also suitable for low viscosity fluids such as water.
- Complete fluid extraction solution: the vacuum fluid extractor is equipped with four tubes of varying diameters that can easily reach the bottom of the oil pan. this versatile fluid extractor allows for the efficient removal of fluids ranging from engine oil to brake fluids. with its generous 7l reservoir and additional hoses, you can effectively access the deepest part...
- Easy operation: simplify the process of changing engine oil and transmission fluid with the convenience of the oil extractor. simply open the hook, insert a suitable hose into the oil pan, and let the oil extractor pump do the work for you. not limited to places, change oil anytime, anywhere.
- Package included: 1 x 7l oil extractor 1 x φ10mm nylon hose 1 x φ8mm nylon hose 1 x φ6mm nylon hose 1 x φ4mm nylon hose 1 x instruction manual. note: if you think the length of the hose is too short, these 4 hoses can be connected to each other and used together, wrapped with tape to avoid leakage.
SHOWview product -
Product Highlights
- Easy oil change: no more crawling under cars for oil changes; this topside oil extractor pump pulls oil from the dipstick tube, allowing you to stay right side up the whole time
- Longer reach: a 5 foot long flexible main suction hose connects to the improved 41 inch long dipstick hose adapter or to the 17 inch long suction hose adapter for plenty of reach
- Carefree car and boat care: easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump
- Move fluid with less mess: an automatic shutoff valve and single piece construction are the cleanliness dream team, helping you keep the fluid off your floor
- Pump for joy: the manual extraction pump quickly evacuates up to 1.4 gallons (5.3l); get fast, easy, and effective fluid extraction with no compressed air required
SHOWview product -
Product Highlights
- 7l vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid.
- Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation.
- Pneumatic mode and manual mode to fit all situation. the manual mode could be used by itself without any other equipments.the pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor.
- Fast suction speed of 1.8l/min. the oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode.
- Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.note:fluids with high volatility, high corrosion, high alkalinity and high temperature cant be used.
SHOWview product -
Product Highlights
- 6.5l vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid.
- Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation.
- Pneumatic mode and manual mode to fit all situation. the manual mode could be used by itself without any other equipments.the pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor.
- Fast suction speed of 1.8l/min. the oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode.
- Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.note:fluids with high volatility, high corrosion, high alkalinity and high temperature cant be used.
SHOWview product -
Product Highlights
- 4x fluid extractor hoses: the manual fluid extractor comes with four suction hoses to change different sizes for various conditions. along with the adapter, the hose can reach the very bottom of the reservoir and suck up every drop of motor oil.
- Wide application: the fluid extractor is widely used to extract the engine oil, brake fluid, atf fluid, and other non-corrosive and non-thick fluid of motorcycles and vehicles. it is perfect for working on cars in the garage or automobile repair shops.
- 9l oil extractor: the manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. its capacity can reach 9l, which allows you to store more oil and avoid frequent recycling waste oil.
- Easy to use: you can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan. with the oil extractor pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward.
- Specificaiton: color: white; fluid extractor capacity: 9 liters; fluid temperature range: 35°f- 200°f/1°- 95°c; polypropylene hose diameter: 4mm / 6mm / 8mm (0.157"/0.236"/0.315"); tank capacity: 9l; working pressure: 70-170 psi
SHOWview product
Coupon copied
