2 Best
Wax 3d Printers
-
Product Highlights- ✅ [25-point auto leveling]：point by point test enables level the bed precisely. compared with the manual leveling, aquila s3 equips with a 25-point calibration sensor, which can level the bed precisely and easily.
- ✅ [0.3/0.4/0.6/0.8 nozzle bundle]：aquila s3 equips with different size of nozzles. 0.3mm nozzle ensures a higher precision in model print, 0.6/0.8 mm nozzle helps to improve the print speed, and reduce the print time
- ✅ [better experience with voxelmaker]：optimized parameter settings on voxelamaker, especially for supports and extrusion. it improves the print quality of aquila s3.
- ✅ [hardened nozzle kit ]：offers a stronger wear resistance over aquila s2, and the possibility for printing carbon fiber filament.
- ✅ [pei build plate]：pei coating surface, which provides a better adhesion and an easier removal ability for models.
- ✅ [faster print speed]：aquila s3 equips with a lighter extruder compared with aquila s2 so that it offers a faster print speed which can up to 200mm/s.
SHOWview product -
Product Highlights
- 2w+ hours lifespan: the service life of the dlp projector is as long as 20,000+ hours, 10 times longer than the 2,000 hours lifespan of an lcd screen, which means you will save a lot of maintenance costs for replacing your lcd printer's screen.
- More stable structure: the z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during z-axis movement and the layer pattern of printed models for better final print results. sandblasted surface build plate with strong adhesion to improve the printing success rate.
- Purified printing environment: the usb-powered air purifier with built-in activated carbon can absorb and filter resin odor to create a refreshing printing environment. or you can choose the upcoming elegoo's first large air purifier (210*247*410mm) designed specifically for the photocuring field, which can remove formaldehyde and up to 95% of vocs.
- Brand new dlp 3d printer: elegoo mars 4 dlp 3d printer adopts ti (texas instruments) dlp technology to project the 405nm beam directly and concentratedly onto the bottom of the resin tank with up to 95% light uniformity. tempered glass replaces traditional lcd screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference. ...
- Low power & ultra-quiet printing: 12w ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of lcd printers. since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 db.
- Smart voxeldance tango slicer: three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). in dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency.
SHOWview product
Coupon copied
