10 Best
Wireless Flash Trigger For Pentaxes
-
Product Highlights- By conveying the based transmitter/receiver system, that each element can be flexibly used as a trigger or receiver.
- The frequency of 2.4 ghz wireless is suitable in most countries and guarantees stability, from distance and high speeds. in areas with high capacity, the distance of the remote control reaches up to 100 m
- The new rf-603 ii is an upgraded version of rf-603, it is a remote shutter release and a multifunctional flash trigger that can trigger synchronously, trains, heat and studio flashes.
- Only 2 aaa batteries are required as a power source for each item.
- The synchronous time can reach 1/320 depending on the situation.
SHOWview product -
Product Highlights
- Ttl autoflash and professional functions: support ttl autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, scan setting, one-shot and multi-shot setting, control of the modeling lamp, adjusting all groups' output value simultaneously, ect.
- 3.5mm sync & usb type-c port: it can work as a wireless flash trigger/ wireless shutter release trigger/ wireless speedlights trigger for pentax camera/ flash trigger with 3.5mm sync cord jack. and supports firmware upgrade via type c usb port.
- Built-in bluetooth for app control: using your / or android-based cell phone/tablets to connect this flash trigger via bluetooth after downloading the "photo" app, then you can control the flash mode, power output, the modeling light mode, the beep of flashed, and etc.
- Effectively avoid signal interference: with 5 group, 32 channels and access to 99 wireless id settings to limit the interference from other nearby systems. note: only when the channels and wireless id of the master and slave unit are same, can they be triggered.
- User-friendly design & easy to operate: lcd with clear display effect; with 5 group setting buttons, and 3 function buttons to realize quick setting; relocated control-wheel; quick lock hot-shot.
SHOWview product -
Product Highlights
- ↔the rotating transmitter can be used upright or in the low-profile down position.
- ↔used with the 3.5-3.5 cable to connect the 6.3mm sync port on the receiver to the studio light.(a 6.3mm adapter is included for studio strodes with larger ports).
- ↔compatible with all most hot shoe flashes, include canon, nikon, olympus, panasonic, pentax, fuji, samsung,sony(except sony flashes).
- ↔2.4ghz frequency, strong anti-interference, communication range up to 200m,8 channels, communication range of 200m, max sync speed of 1/250s.
- ↔package includes: 1*receiver, 1*transmitter, 1*3.5 to 3.5mm sync cable, 1*3.5mm to pc plug cable, 1*1/4" mono plug socket , 1*carrying pouch, 2*lanyards.
SHOWview product -
Product Highlights
- 【wireless system】build-in 2.4g wireless transmission with all-in-one functions and 100 meters further transmission, offers more stable signal, farther distance, wider range of application, less power consumption, less affected by the obstacle
- 【faster recycle time】 0.1-2.6s recycling time at full power (using ni-mh batteries of panasonics),the number of flashes is about 230(2500ma ni-mh battery)
- 【strong compatibility】adopts godox wireless x-system, with build-in 2.4g wireless transmission, can be used with godox ad360ii-c/ad360ii-n, tt685c/tt685n, x1t-c/x1t-n wireless control system
- Superior performance】more flash times,approx.230 full power flashes (using 2500ma ni-mh batteries), provide enough flash times for your shooting
- 【high-speed sync】 can realize high speed sync when used with godox cell-ii trigger or x1c/x1n ttl wireless trigger (sold separately), the max speed can up to 1/8000s (depend on the cameras). it’s particularly convenient when using the aperture to fill flash on portrait preferentially.please note:the tt600 can not realize hss when used on camera hot shoe
SHOWview product -
Product Highlights
- 2.4g wireless trigger transmitter: 15-channel transmitter and receiver unit with operating range of 50m (164ft). goes into rx slave flash mode, it supports wt-u trigger, equipped with 15 channels. only need to set the flash and trigger wt-u at the same channel when using. that trigger system can set multi flashes lighting application.
- Muiti flash mode: the flash will fire at the your setting of output power. the range of output power is 1/128-1/64/-1/32/-1/16-1/8-1/4-1/2-1/1. you can test the flash under any mode. when testing, the flash will flash with corresponding brightness according to the selected output power level.
- Wide compatibility: great camera flash with high guide no.33 (iso 100, 35mm), supports manual/s1/s2/multi flash mode. compatible with most canon nikon panasonic olympus pentax and other dslr cameras with standard hot shoe and sony camera with new mi hot shoe like sony a7 a7s/a7sii a7r/a7rii a7ii a6000 a6300 a6500 (not compatible with canon 1500d/2000d/4000d).
- Rotation angle and more function: vertical rotation angle: -7~90 degrees, horizontal rotation angle: 0~270 degrees, fixed zoom, provide you with a rich flash perspective. additional function: power saving mode, synchronization, external charging, over temperature protection and systematic over temperature protection fuction.
- What you get: 1 x speedlite flash built-in flip down wide angle flash diffuser and reflection panel, 1 x mini stand, 1 x 2.4g wireless flash trigger, 1 x user manual
SHOWview product -
Product Highlights
- Fully support ttl autoflash and pro functions.1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, tcm transform function, magnfication function, one-shoot & multi- shoot setting, group modeling lamp control, group zooming, adjusting all groups' output value simultaneously, etc.modeling lamp control,beep control,c.fn setting custom functions.
- Smart tcm button: long press tcm button can transform the flash value in ttl mode into the power output value in m mode; short press tcm button enables the groups to be switched between the one-group and multi-group mode.
- Outstanding design and great portability.with built-in godox 2.4g wireless x system and versatile using methods.large lcd screen slanted design，11 customizable functions,5 group buttons and 4 function buttons offer convenient manipulation,very suitable for novice learning.
- Wireless id setting:16 groups and 32 channels to wirelessly control and trigger.add 01 to 99 wireless id settings,which can only achieve triggering when the channels and wireless ids of the master and slave unit are set to the same,avoiding signal interference effectively.
- Versatile using methods: as a wireless godox flash trigger/ wireless shutter release trigger/ wireless sony speedlights trigger/ flash trigger with 2.5mm sync cord jack.
SHOWview product -
Product Highlights
- The transmitter is equipped with an advanced electrical circuit. circuit design with sleep function, low power consumption.
- A sender can synchronously control 16 receivers.
- Easy to use wireless remote control system with ultra-low voltage and battery saving mode.
- The receiver is used with alternating power, and it achieves a fast response in advanced mcu control.
- It can meet the need for synchronisation for every different shutter camera.
SHOWview product -
Product Highlights
- Fast flash: 1/300s ~ 1/20000s flash time allows excellent exposure and ensures clear and vivid images.
- Powerful function: equipped with lock synchronisation function, more flexible use, low power consumption and overheating protection.
- Flexible control: it has 8 power control levels and three flash modes that can be switched as desired (m/s1/s2) to suit different photo environments.
- 【compatibility】built-in wireless reception, supports wireless shutter release function and is widely compatible with dslr cameras with standard hot shoes such as nikon, canon, pentax, olympus, etc.
- Synchronized triggering: with the pc synchronization interface, flash and camera can be triggered synchronously; the trigger transmitter has 16 channels and has good anti-interference performance.
SHOWview product -
Product Highlights
- Yn-560iv can be used as master unit, provides 3 independent groups with controlling abiligy, realizing remote control the flas mode, flash output, and focal length of yn560iv and yn-560iii
- It can be triggered through the flash mounted on the camera, 2.4g wirless triggering system, s1 and s2 pre flash cancel mode.
- Yn560 iv = yn560iii + yn560-tx, supports wireless master function.
- One yn560 iv can receive the wireless signal from yn560 iv, yn560 tx (ii), rf-603 ii and rf-602, with optical 16 channels. when yn-560 iv and yn560tx (ii) used as transmitter, it can realize remote control and parameter settings.
- Supports setting save automatically, custom settings ( fn ). gn58@iso100, 105mm ( m / multi mode ). supports ultra-fast charging recycle system, external power supply.
SHOWview product -
Product Highlights
- With 433 mhz frequency and 16 independent channels.
- Universal hot shoe suitable for canon, nikon, olympus, pentax and other flash units with universal hot shoe.
- This kit includes 1 transmitter, 2 receivers and 1 sync cable.
- With a transmission distance of up to 30 meters, it provides strong anti-interference ability, no direction or angle limit.
- The trigger of the receiver is powered by dry batteries and provides a maximum synchronous speed of up to 1/250 seconds.
SHOWview product
Coupon copied
