10 Best
Tester With Capacitance Tests
-
-
Product Highlights
- π[designed for measuring resistance, capacitance and inductance, also can be used to test transistor.
- π[powered by a 9v battery(not included), low consumption.
- π[3 1/2 digits lcd display with white backlight.
- π[overload protection, over range and low battery indication.
- π[compact size, light weight, convenient to carry.
SHOWview product -
Product Highlights
- π using this theory, we can measure the capacitor is bad/ damaged or good in condition.
- π dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed esr table for fast check.
- π it is a series resistor inside capacitor, using 100khz to remove the impedance 1/(2*pi*f*c). the impedance become small, and we can then measure the true series resistor value.
- π our esr meter only applies less than 15mv dc or peak to peak on a good capacitor, as a result we can use it as in circuit test.
- π during repairing tv, lcd, audio board, etc. we can in circuit testing the capacitor is good or not.
SHOWview product -
Product Highlights
- [triple-mode alarm]: the mini circuit tester backlight flashes, lcd display analog bar and continuous beeping sounds when detecting ac voltage.
- [smart mode]: the smart digital multimeter can automatically test voltage, resistance, and continuity with the best resolution. with this digital voltmeter, you can solve electronic maintenance, industrial, vehicle and household electrical problems, etc.
- [red/green backlight]: the pocket ac voltage tester has a large lcd display, with red/green backlight, very easy to read.
- [pen type multimeter]: the low voltage tester also can be as a pen-type multimeter, it can accurately measure ac/dc voltage, resistance, continuity, capacitance, diode, v-alert and live wire.
- [upgraded flashlight]: the electrical voltage tester has a flashlight, which let you test efficiently and comfortably anywhere, indoors and outdoors, day and light.
SHOWview product -
Product Highlights
- Photos:the lc100-a was attached to the measurement of the large capacitor 1 uf-100 mf,parallel measured 28.7 mf, equivalent to a capacitor of 4.78 mf, the capacity of 28.7 mf is beyond capacitor of the range of the table, the test of the instrument goes directly to 100 mf!
- The type lc100-a is a test function of the electrolytic capacitor of 1 uf - 100 mf with all the characteristics, in addition to the three basic positions, all the positions have automatic range. this product has an absolute advantage in the small value of the tests with respect to sales of finished products in the market of inductance capacitance meters (such as the 624...
- The flexible calibration online allows you to always maintain the accuracy of the measurement. the instrument does not use any potentiometer adjustment. the calibration parameters are stored completely in the micro-controller. the internal flash power is not lost.
- The resolution has reached 0.01 pf, we must pay attention to the effects of the test clip, to keep the test clip without access capacitance normalized to 0 and then, as much as possible, keep the relative position of the test clip in the capacitor unchanged, this is the same for testing the small inductance.about 4 turns of wire wound test results 0.058 uh, this result ...
- The advantage of this is also the instrument.capacitor of 0.22 uf, the figures are results of very stable measurements. if you use the results of the test, overcome with great force that the stability of this capacitor is poor or has poor high-frequency characteristics, and the good capacitive screen is very stable.
SHOWview product -
Product Highlights
- [smart mode]: this digital multimeter tester can automatically measure ac & dc voltage, resistance and continuity with the best resolution.
- [pen type multimeter]: the pocket digital voltmeter can accurately measure diode, ac/dc voltage, resistance, continuity, v-alert and live wire. with this smart auto range multimeter, you can solve vehicle, household and electronic problems.
- [rechargeable]: the smart digital multimeter comes with a rechargeable battery & charging cable, ensuring that you never have to worry about running out of power during your measurements.
- [environment temperature test]: bside s5x electrial voltage tester can also be used as a temperature sensor, greatly expands the testing applications, but also let you not worry the temperature sensor consume too much space.
- [no-contact voltage detector]: the auto range digital multimeter can also be used as a professional non-contact voltage tester. the sensitivity of the ac volt tester is adjustable.
SHOWview product -
Product Highlights
- γlarge backlit lcd displayγ auto polarity display, easy to read large backlit lcd display, back-light makes a real difference in low light areas
- γnice protective orange shell with stand builtγ the case with our multimeter is some kind of non slip, slightly soft plastic that will help with drop protection, the stand places the device at a 45 degree angle and makes the screen easy to see hands free
- γneoteck 2000 counts 8233d pro pocket digital multimeterγ 2000ΞΌf capacitance and 200khz frequency measurement, accurately measures current, voltage, resistance, and more, maximum reading over time, auto-ranging and continuity buzzer
- γce rated digital mulimeter with over load protectionγ designed to safely and accurately troubleshoot a variety of automotive and household electrical
- γincluded 9v volt batteryγthe compartment lid at the back is secured by one cross head screw, not difficult to remove at all; also, included 2 x test leads and 2 x banana plug to alligator clip cable
SHOWview product -
Product Highlights
- Ncv function & lpf function: non-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. lpf function filters out the influence of high-frequency signal on the measurement results, so that the multimeter can measure more electrical parameters.
- Jaw opening: the clamp measures the ac dc current in a conductor up to 25mm without interrupting the circuit. made of high quality abs, durable enough for long term use. comes with a handy carrying pouch, perfect for use while you're on the go.
- Multifunctional clamp meter with true rms: accurate ac/dc voltage, ac/dc current, frequency, duty cycle, diode test, capacitance and resistance measurement. automatically ranging true mean squared (trms) technology for increased accuracy.
- Temperature measurement & other functions: with temperature measurement function that can be used for hvac system inspection. with large lcd backlight display and data hold function, convenient to read data in dark. additional features such as auto range, low battery indication, auto power off.
- Continuity test & over load protection: designed to safely and accurately confirm the circuit conducts electricity with low voltage indication and overload protection. it is a pocket digital clamp meter, high reliability, high accuracy and portability, a perfect tool for the laboratory, factory and home.
SHOWview product -
Product Highlights
- Ma levelac/dc resolution: 100a 1ma high resolution, it can test small current, multi-function fast response.
- Small and exquisite: you can put it in your pocket for easy carrying.
- Multimeter function: it's not only a clamp meter, but also with multimeter function, you can test ac dc current/voltage, resistance, capacitance, diode.
- Ncv test: it with noncontact electric field measure if you want to measure whether there is ac voltage or electromagnetic filed, you can chose range.
- Vfc function: can reduce the interference of high-frequency signals on the measurement results.
SHOWview product -
Product Highlights
- [infrared thermometer]: thanks to the smart multimeter with infrared thermemeter design. under any function, you could switch to temperature measurement by pressing the button once. for example, when test current or voltage, you could check the heating status of high-voltage terminals, which could judge the wire connection status.
- [vfc function]: pocket digital multimeter with vfc function, which can measure the output voltage or current of inverters and motors.
- [dc and ac current test]: bside u6 electrical tester can not only measure amps in dc, but also measure amps in ac, it can automatically measure dc current and ac current up to 600a with the open jaw.
- [measure both current & voltage]: with our open jaw clamp ammeter, you could test current with the jaw while measuring voltage with the test leads, or test volt with test leads while measuring amp with the jaw, the test results will dual line display on the screen. very convenience for troubleshooting motors, pumps, or other equipment.
- [rechargeable batteries]: the ac dc clamp meter comes with rechargeable batteries, you will never about power problem.
SHOWview product
Coupon copied
