7 Best
Bosch 3d Printers
-
Product Highlights- ✅ 1，durable and more temperature-resistant extruder with the maximum printing temperature up to 260℃；2，its direct drive extruder can print tpu 95a flexible filament.the heating temperature up to 260℃ achieves smoother filament feeding；3，it supports printing tpu 95a / pla / abs / hips / petg / petg pro filaments, etc. it also supports printing third-party filaments, offe...
- ✅ finder 3.0 retains the classic red and black color scheme of finder 2.0, and features integrated structure design. with no assembly required, it is easy to use in seconds after being unpacked; smaller equipment size and larger build volume for higher volume utilization.
- ✅【190×195×200mm build volume】:the 200mm vertical z-axis height meets the printing needs of most users. let your imagination run wild!
- ✅ 1，finder 3.0 can save the printing status in the event of an unexpected power failure and continue printing after the power is restored；2，when the filament is used up or accidentally broken, finder 3.0 will alarm and pause printing, and then continue printing after the filament is replenished or replaced.
- ✅ the removable glass platform and pei magnetic steel plate platform are available for options. easy platform removal and replacement to meet diversified printing needs.
SHOWview product -
Product Highlights
- 🏆【250mm/s max printing speed】:ender-3 v3 se features a max printing speed of 250mm/s and 2500mm/s² acceleration, which can print faster while keeping the print quality.
- 🏆【stable dual z-axis】:the rigid dual z-axis reduces z wobbling. the y-axis used a pair of 8mm thick linear shafts made of strong and wear-proof steel, able to carry the build platform steadily for a lasting time. together, they will take good care of each print.
- 🏆【auto filament loading & unloading】:tap "extrude", and the filament will flow out of the nozzle smoothly. tap "retract", and the filament will exit quickly. so, it is effortless to replace the filament.
- 🏆【compact and sleek design】:ender-3 v3 se is compact, simple, and elegant. it combines neat x, y z-axis, smooth t-shaped profiles, and low-key tensioners for a sleek look.
- 🏆【auto leveling w cr touch & strain sensor】:leveling is the basis of print quality. ender-3 v3 se features a cr touch sensor for auto leveling and a strain sensor for auto z offset. just lay back and enjoy the print success.
- 🏆【capable "sprite" direct extruder】:the "sprite" direct extruder of ender-3 v3 se works well with pla, petg, and flexible tpu, unlocking your creative potential. and the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
SHOWview product -
Product Highlights
- 【300℃ high temp printing】all-metal hotend setup comes with a larger melt zone, which makes sv07 could print at 300℃. an extra large fan at the rear of the extruder offers sv07 triple airflows to quickly cool prints and achieves good layering for better results. no more ptfe replacements or firmware flashes needed to print with different materials easily, like abs, nylon...
- 【25-point bed leveling】sv07 uses 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. this precise and smart technology makes it possible to get a fantastic first layer. note: set initial layer height to 0.3mm when slicing will help you get optimal results.
- 【more practical, more convenient】sv07 boasts several optimizations, including leds around the nozzle, tool drawer and high quality belt. added led bars under the extruder helps to observe the prints at night and capture beautiful prints pictures so that you could share with your friends on social media. the high strength belt with anti-slip design ensures stable transmi...
- 【customer service】sovol 3d printers come with one-year warranty and lifetime technical support. any question about sovol sv07 3d printer, just click "ask a question" through our storefront's page, report an issue through the "your orders" page. we will fast respond within 24 hours and try our best to resolve your every issue.
- 【klipper makes print speed up to 500mm/s】sv07 is equipped with 480x800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. klipper firmware allows the high-speed printing of sv07 up to 500mm/s. we recommend you to choose 250mm/s for optimal results. klipper also offers a range ...
- 【planetary dual gear direct drive】 with sovol's self-developed all metal direct drive extruder that comes with planetary dual gear set, sv07 offers a higher drive ratio and lighter motor for precise extrusion. we also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions.
SHOWview product -
Product Highlights
- 🏆【worry-free auto leveling w cr touch & strain sensor】:leveling is the basis of print quality. ender-3 v3 se features a cr touch sensor for auto leveling and a strain sensor for auto z offset. just lay back and enjoy the print success.
- 🏆【stable dual z-axis】:the rigid dual z-axis reduces z wobbling. the y-axis used a pair of 8mm thick linear shafts made of strong and wear-proof steel, able to carry the build platform steadily for a lasting time. together, they will take good care of each print.
- 🏆【auto filament loading & unloading】:tap "extrude", and the filament will flow out of the nozzle smoothly. tap "retract", and the filament will exit quickly. so, it is effortless to replace the filament.
- 🏆【250mm/s max printing speed】:ender-3 v3 se features a max printing speed of 250mm/s and 2500mm/s² acceleration, which can print faster while keeping the print quality.
- 🏆【capable "sprite" direct extruder】:the "sprite" direct extruder of ender-3 v3 se works well with pla, petg, and flexible tpu, unlocking your creative potential. and the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
- 🏆【y-axis dual linear shafts】:made of strong and wear-proof steel, the linear shafts ensure a lasting, steady motion of the y-axis.
SHOWview product -
Product Highlights
- Quiet printing - low-decibel operation ensured by a silent mainboard, not bothering study or work.
- Smooth feeding - full-metal extruder with greater force enables smooth feeding.
- Durable build surface - carborundum build surface effectively reduces the warping issue with even heating.
- No fear of power outage - higher success rate with the resume printing function which saves data upon power outage and then recovers printing once the power is on again.
- Accurate cr touch auto-leveling - the cr touch will take 16-point measurements of the bed surface and then adjust all movements to follow the leveling of the bed. accurate and easy to handle.
- Quick heat dissipation - corrugated heat sink enlarges the radiating area, enabling fast cooling down.
SHOWview product -
Product Highlights
- 2w+ hours lifespan: the service life of the dlp projector is as long as 20,000+ hours, 10 times longer than the 2,000 hours lifespan of an lcd screen, which means you will save a lot of maintenance costs for replacing your lcd printer's screen.
- More stable structure: the z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during z-axis movement and the layer pattern of printed models for better final print results. sandblasted surface build plate with strong adhesion to improve the printing success rate.
- Purified printing environment: the usb-powered air purifier with built-in activated carbon can absorb and filter resin odor to create a refreshing printing environment. or you can choose the upcoming elegoo's first large air purifier (210*247*410mm) designed specifically for the photocuring field, which can remove formaldehyde and up to 95% of vocs.
- Brand new dlp 3d printer: elegoo mars 4 dlp 3d printer adopts ti (texas instruments) dlp technology to project the 405nm beam directly and concentratedly onto the bottom of the resin tank with up to 95% light uniformity. tempered glass replaces traditional lcd screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference. ...
- Low power & ultra-quiet printing: 12w ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of lcd printers. since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 db.
- Smart voxeldance tango slicer: three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). in dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency.
SHOWview product -
Product Highlights
- 【ultra 8k high precision】halot-mage 3d resin printer uses an 8k(7680x4320) mono lcd featuring 29.7μm xy resolution, more refined and anti-aliasing than the 50μm of a regular 4k printer.
- 【activated carbon filter】powered and controlled via the printer directly, it includes a replaceable activated carbon filter that is 5.8 times larger than others. it absorbs irritant resin odor more efficiently. a vent hole is at its back to connect a vent tube.
- 【better slicing experience】the self-developed halot box adopts an intuitive 4-stage workflow and includes many presets. halot-mage 3d resin printer is also compatible with other slicer software. with halot-mage, you will get a 3-month vip of chitubox pro for free.
- 【larger build volume】creality halot-mage resin 3d printer has a large 10.3-inch lcd screen with the build size of 8.97x5.03x9.05 inch/228x128x230mm, about 45% larger than an 8.9"" resin printer, which leaves sufficient printing space and freedom for you to make any shapes of 3d models.
- 【ultra steady z-axis with dual linear rails】the z-axis of halot-mage resin printer features dual rigid linear rails and is driven up and down by a powerful motor. it reduces wobbling vastly and deals well with larger and heavier prints.
- 【unique "magearch" flip lid】the flip lid of halot-mage is easy to open and close with one hand and needless to place aside. it is only 1/4 taller when opened, saving more room. the orange tint is practical to block 99.89% of ambient uv light for minimal interference.
SHOWview product
Coupon copied
