10 Best
Gizmo Dorks 3d Printers
-
Product Highlights- Petg combines the benefits of abs and pla, increased strength and flexibility
- Petg filament is compatible with various 3d printers such as the monoprice maker select, lulzbot, flash forge, and many more
- Recommended nozzle temperature: 230 - 260 c
- Net weight: 5 kg / spool diameter: 11.75" / spool width: 6.25" / spool hub diameter: 1.25"
- Filament diameter - 1.75mm
SHOWview product -
Product Highlights
- Abs and pla filaments (along with many other materials) print directly on to pei surface without the need for additional adhesives, tapes, or slurry.
- Pei can be easily cut down to desired size by scoring with a utility knife. bundle includes 1x pei sheet and 5x 3m 468mp transfer adhesives that are 10" x 10" each.
- Polyetherimide 1mm thick sheet, ultem 1000 grade, installs quickly on top of existing flat build platforms (e.g. borosilicate glass).
- Remove blue protective film before using. pei can be reused an endless number of times for multiple prints. simply wipe down with isopropyl alcohol between prints.
- Pei sheet dimensions are 20" x 20" (508mm x 508mm) with a thickness of 0.04 inches (1mm). this pei sheet is made specifically for large format printers such as the creality cr-10 s5 with large build areas
SHOWview product -
Product Highlights
- ✅【patented removable extruder structure/no leveling printing】: :flashforge patented extruder structure,fully upgraded,steady filament loading,turbofan and air guide improve printing result.ready-to-use and no leveling printing preventing any printing imprecision due to improper leveling
- ✅【built-in filament cartridge/auto filament loading/unloading function】: :printer will detect filament and start loading automatically after filament has been inserted into the intake.
- ✅【small device size】: :small but compact structure,with no angular design,providing a 150*150*150mm build size.
- ✅【emovable &heatable &bendable plate】: :shape-memory material plate heats evenly,supports bending without deformation.supports heating temperature up to 100°c,supports abs filament.under 400-hour bending to test,platform remains the same.much easier to take down models,even big models.
- ✅【built-in camera function/on-line monitor printing process】: :you can check real-time printing process and result after connecting the camera to internet.
SHOWview product -
Product Highlights
- 【ultra-fast and exceptional quality】core xy up to 20000 mm/s² acceleration, maximum speed 600mm/s, the acceleration from zero to 600 mm/s takes just 0.025 seconds. from unboxing to starting printing, only 10mins, enjoy happy printing every day and great all-around quality.
- 【filament run-out sensor & power loss recovery】eliminate the problem of empty spools during printing. change filament when empty and resume. worry-free from a power cut-off, you can resume the print from where it left off.
- 【succeed with a perfect first layer】full-auto one-click leveling calibrates and levels the bed properly, making you a perfect first layer for every 3d print. it provides accurate and smooth surface to achieve quality printing performance.
- 【vibration compensation&less waiting time】vibration compensation, eliminating ghosting in prints. nozzle with a flow of 32mm³/s, 50w heating power, 200℃ heating up in 35 seconds. precise and consistent extrusion for smooth and no-blur prints.
- 【robust designs for superior quality】open 3d printer, suitable for use in open and, well-ventilated environments, flexible removable pei steel plate support pla/petg/tpu (0.4mm nozzle) and pla-cf/petg-cf (0.6mm nozzle).
SHOWview product -
Product Highlights
- Free of leveling & removable flexible build platform - fully assembled leveling-free 3d printer, you can use the printer out of the box. suitable for various 3d printer filament pla, abs, petg filament etc. even 3d printing beginners can start printing like an expert.
- Super quiet printing & build-in camera - < 45 decibels noise level, it can records 3d printing process in real-time, allows you to monitor 3d printing status through flashcloud or polarcloud anywhere, anytime.
- Detachable nozzle & fast heating - the nozzle is made of stainless steel tube material, adventurer 3 nozzles can be heated up to 240 ℃ and it can fast heated to 200°c in 50 seconds. if you want to print pc, petg and high-temperature filaments, you could install a 0.3, 0.4, 0.6mm 265℃ nozzle, simply change the nozzle in three steps.
- Load & unload filament automatically - just insert the end of the filament in the inlet and wait for loading from the nozzle. the printer suspends and reminds you on the screen interface when the filament is broken or running out. filament compatibility pla/abs. fits 0.5kg filament spools.
- Cloud storage & online slicer - share and download files on the cloud; slice models and transmit sliced files to the 3d printer via wifi connection.
SHOWview product -
Product Highlights
- Massive build volume: with a spacious build volume of 420x420x480mm³, our printer allows you to bring your ambitious designs to life, whether for large models or multiple smaller objects, this generous build volume provides ample space for your creations.
- 300°c high-temp nozzle kit: our printer features a high-temp nozzle kit capable of reaching up to 300°c. the extended hot end design, along with the 60w ceramic heating element and brass heating block ensure fast and uniform filament melting and extrusion. automatic calibration of nozzle pid parameters further improves temperature control stability.
- Effective cooling performance: the print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for comprehensive and efficient heat dissipation. two additional 6025 ball-bearing blower fans behind the print head quickly cool down the newly deposited hot filaments, preventing warping or deformation for better overhang and bridge ...
- Pre-installed klipper firmware: the neptune 4 max comes with the powerful klipper firmware, enabling impressive printing speeds of up to 500mm/s (default 250mm/s) and up to 8000mm/s accelerations, supporting advanced features such as input shaping and pressure advancing. equipped with acceleration sensors on the x and y axes for automatic calibration and improved print ...
- Dual-gear direct extruder: our printer boasts a dual-gear direct extruder with a 5.2:1 reduction ratio for reliable filament feeding and optimal extrusion. the full titanium alloy throat pipe enhances heat dissipation, reducing filament clogs and maintaining consistent printing performance.
- Auto bed leveling + auxiliary leveling: enjoy hassle-free bed leveling with the 121 (11x11) points auto bed leveling system! additionally, auxiliary leveling by hand-twist knobs allows further fine-tuning, ensuring that your first-layer printing comes out perfectly every time.
SHOWview product -
Product Highlights
- ➤capable extruder & 32-bit mainboard: the market-proven “sprite” direct drive extruder ensures smooth and consistent feeding of pla, petg, and also flexible tpu, bringing more possibilities. the 32-bit silent mainboard uses an advanced stepper motor drive to control all axes more precisely for less operation noise.
- ➤y-axis linear shafts & dual z-axis: the rigid dual z-axis lead screws reduce z wobbling effectively. the y-axis features two 8mm linear shafts made of strong and wear-proof steel, which underpins a steady and accurate motion of the build platform for a lasting time.
- ➤ easy to get started: the printer is easy to put together in 3 steps. it uses cr touch sensor for auto leveling and a strain sensor for auto z offset, saving the need for a calibration card or knob screws. so easy to achieve a perfect first layer. also, you can load or unload the filament with one tap. all set within 20 minutes.
- ➤rapid and lively printing: it can print at up to 250mm/s speed with 2500mm/s² acceleration, allowing you to complete the models efficiently. the optimized ui uses motion graphics to display the leveling process and other parameters, so you will know how the printer is doing at a glance.
- ➤easy model removal and more: it takes up less space but brings an ample build volume. the pc spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. thanks to the power loss recovery function, it can resume printing after an unexpected power failure, avoiding filament and time waste.
SHOWview product -
Product Highlights
- [high-speed printing, smooth operation] - the 3d printer prints at speeds up to 600mm/s with an acceleration of 8000mm/s², enabling print jobs to be completed in a shorter period of time.
- [upgraded sprite direct extrusion] - the 60w ceramic heater and bimetal (copper + titanium alloy) insulation around the hot end provide smooth extrusion, smooth wire feed, and no clogging, even at high flow rates.
- [algorithm for fine print quality] - printer vibration is mitigated by input shaping to minimize ringing or ghosting, and feed flow is optimized by motion advance to reduce paper clumping and bleed-through.
- [automatic leveling, perfect first layer quality] - the leveling and z-offset of the cr-10 se are fully automatic, eliminating the need for manual calibration to achieve neat, smooth, and even first-layer printing.
- [precision linear guides for x-axis and y-axis] - precision, frictionless and made of durable steel, the ball-bearing linear guides bring long-lasting accuracy and stability to the x-axis and y-axis.
- [efficient model cooling fan] - creality cr-10 se is equipped with a 12,000rpm fan that instantly cools the freshly printed model part with strong wind power to provide better bridging and overhanging effects.
SHOWview product -
Product Highlights
- Full-color fidelity: revopoint inspire’s built-in rgb camera works with a flash led to remove shadows and make an object's colors clear so users can capture vivid textures to create lifelike 3d models. that can be used for 3d printing, car modification, historical preservation, digital art, and diy projects.
- Flexible compact scanning: seamlessly swap between using inspire as a handheld and turntable 3d scanner. it's easy to switch between handheld mode for capturing stationary objects, your face, or body parts, and turntable mode for scanning small items such as car auto parts or historical artifacts using the mini auto turntable.
- High-accuracy 3d scans: with inspire’s advanced hardware delivering a crisp accuracy of up to 0.2 mm and fast 14 fps to 18 fps scanning speeds, you'll create accurate, ready-to-use 3d models in no time. capture models with inspire's 308 mm x 225 mm at 500 mm single capture range, offering a wide field of view of easy tracking of feature-rich and featureless objects.
- Unbelievably lightweight: inspire is one of the lightest 3d model scanners in the world at only 140 grams and is so compact that you can put it in your pocket. the portable 3d scanner is lightweight makes it comfortable to hold and use with ios or android devices for on-the-go mobile scanning.
- User-friendly software: go from 3d scanning beginner to master fast with the user-friendly, free, and powerful revo scan 5. it supports multiple data format outputs, obj, stl, and ply, for compatibility with most cad, 3d modeling, and 3d design software, such as fusion 360, blender, and zbrush. the affordable 3d scanner inspire is compatible with windows, macos, android...
SHOWview product -
Product Highlights
- 2w+ hours lifespan: the service life of the dlp projector is as long as 20,000+ hours, 10 times longer than the 2,000 hours lifespan of an lcd screen, which means you will save a lot of maintenance costs for replacing your lcd printer's screen.
- More stable structure: the z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during z-axis movement and the layer pattern of printed models for better final print results. sandblasted surface build plate with strong adhesion to improve the printing success rate.
- Purified printing environment: the usb-powered air purifier with built-in activated carbon can absorb and filter resin odor to create a refreshing printing environment. or you can choose the upcoming elegoo's first large air purifier (210*247*410mm) designed specifically for the photocuring field, which can remove formaldehyde and up to 95% of vocs.
- Brand new dlp 3d printer: elegoo mars 4 dlp 3d printer adopts ti (texas instruments) dlp technology to project the 405nm beam directly and concentratedly onto the bottom of the resin tank with up to 95% light uniformity. tempered glass replaces traditional lcd screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference. ...
- Low power & ultra-quiet printing: 12w ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of lcd printers. since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 db.
- Smart voxeldance tango slicer: three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). in dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency.
SHOWview product
Coupon copied
