10 Best
Valve Cover Gasket Sealants
-
Product Highlights- Tacky paste for holding cut gaskets in place during assembly; helps seal cut gaskets
- Temperature range: -65°f to 500°f (-54°c to 260°c)
- Reliable, fast-drying, all-purpose sealant dries to a highly tacky, non-brittle film; remains tacky indefinitely
- Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane; sensor-safe
- Suggested applications: valve covers, fuel pumps, carburetors, manifold gaskets; seals any rubber, cork, paper or composite gasket
SHOWview product -
Product Highlights
- 2. type two is a metal, stamped steel cover using rtv sealant as the gasket. these gaskets work on this type!
- Center hole to center hole:4-1/4" center hole to center hole: 4"
- Two types of rocker valve covers. 1. one type of cover is made of plastic and uses a o-ring to seal with. (these gaskets will not work).
- You can use atv sealant with these gaskets, or without atv. your preference. also check your metal covers with a straight edge for warping. if any warp is detected, a new cover will be required to seal. please verify you have "metal covers", not plastic, before ordering
- Packaging: 6 pack
SHOWview product -
Product Highlights
- Prevent leakage: the engine valve cover gasket has perfect sealing, can be used to directly replace the damaged one to prevent leakage.
- Reusable: this engine valve cover gasket is reusable, no sealant required. machined to meet standard specification, with strict quality control.
- Perfect fit: exquisite and careful workmanship, valve cover gasket can perfectly match with your original car, reliable to use.
- Durable material: the gasket is made of rubber and steel, heat resistance, aging resistance and oil resistance, not easy to crack.
- Fitment: valve cover gasket fits for bbc big block 396 427 454 502 engine. please confirm whether your model is applicable before buying.
SHOWview product -
Product Highlights
- Products distance: distance between the top holes is 3.66"
- Fits: these fit the 700 model engines (7000 series) with stamped steel valve covers, and these are for the stamped steel valve covers that come from the factory with sealant and no gasket.
- Products distance: distance between the top and bottom holes is 3.97"
- Products distance: distance between the lower holes is 4.26"
- Ensure: if there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem.
SHOWview product -
-
Product Highlights
- Prevent leakage: the engine valve cover gasket has perfect sealing, can be used to directly replace the damaged one to prevent leakage.
- Durable material: the gasket is made of rubber and steel, heat resistance, aging resistance and oil resistance, not easy to crack.
- Fitment: valve cover gasket fits for bbc big block 396 427 454 502 engine. please confirm whether your model is applicable before buying.
- Reusable: this engine valve cover gasket is reusable, no sealant required. machined to meet standard specification, with strict quality control.
- Perfect fit: exquisite and careful workmanship, valve cover gasket can perfectly match with your original car, reliable to use.welcome inquiries
SHOWview product -
Product Highlights
- Count on us: for more than 40 years, our products have earned a loyal following from people who take pride in their work. with each product we innovate, we continue to provide the world's strongest bond for your projects
- Versatile & dependable: ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and oven doors
- Hi temp red silicone gasket maker & sealant: is an rtv (room temperature vulcanized) silicone gasketing material, designed for use in mechanical assemblies where the existence of higher, continuous temperatures up to 550º f or 650º f intermittent might exist
- Easy to use: curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. it will not shrink or crack, resists weathering and is sensor safe
- Do it yourself: big or small, you can diy it with j-b. our heavy duty adhesives repair & restore it right the first time. jb weld delivers the legendary performance of the world's strongest bond
SHOWview product -
Product Highlights
- 🛸【compatible models】 valve cover gaskets are perfectly compatible with toyota 2002-2009 camry, 2009-2012 corolla, 2009-2013 matrix, 2001-2008 rav4, 2002-2008 solara, 2001-2007 highlander, 2005-2009 scion tc, 2008-2013 xb, lexus 2010-2012 hs250h, pontiac 2009-2010 vibe. please refer to the product description page or pictures for details.
- 🛸【tight sealing effect】 this valve cover gasket set adopts unique sealing technology and can be tightly installed between the engine cylinder head and the valve cover to prevent the invasion of impurities and oil leakage. if your car's engine oil level is always low or emits a smell of fuel, timely replacement of the head gasket sealer is the correct choice!
- 🛸【replacement part number】 this valve cover gasket set replaces oem#vs50530r, vs50362, 11213-28021, 11213-0h010, 0361639, jn2424. it comes with 4 large rings and 6 small holes inside. please check the oem/size/year/model carefully to make sure our valve cover gasket kit is what you need before placing order, thanks!
- 🛸【flexible material】 we choose premium rubber as the raw material for engine valve cover gasket, aiming to provide you with a quality assurance of flexibility, tightness, durability, perfect fit, and not easily damaged. it is very easy to install, you just need to cover this product on the valve cover correctly as shown in the picture.
- 🛸【perfect after-sales service】 we care about our valued buyers, and each of our automotive replacement valve cover gasket sets are carefully tested and inspected before delivery. if you have any questions, our customer service staff will be happy to help you. if the item is defective within 1 month, you can return it to us.
SHOWview product -
Product Highlights
- 🔥distance between the top holes is 3.66"
- 🔥distance between the top and bottom holes is 3.97"
- 🔥fits: these fit the 700 model engines (7000 series) with stamped steel valve covers, and these are for the stamped steel valve covers that come from the factory with sealant and no gasket.
- 🔥distance between the lower holes is 4.26"
- 🔥check your engine or valve cover to be sure these match your hole spacing.
SHOWview product -
Product Highlights
- 🚘【application】sbc steel core rubber valve cover gaskets compatible with sbc 283 305 327 350 383 400 rubber silicone valve cover gasket
- 🚘【note】the attachment to the valve cover must be just right-not too tight and not too loose. any of these two conditions can ruin the gasket's efficiency; consequently, the valve cover itself.
- 🚘【replace oe numbers】7484box. please check the description and compatibility chart before your purchasing. all the products have been inspected before sending out.
- 🚘【superior seal】it securely seals the valve cover so that oil leaks will be prevented each time it pools lubricant oil as it goes to the cylinder head's drain back opening. aside from oil, this gasket also helps prevent the entry of other harmful materials to the valve train.
- 🚘【warranty】12-months-warranty from the date of purchase.carefully read the list and make sure the part is compatible. if you are not sure, please contact us. we will answer you within 24 hours.
SHOWview product
Coupon copied
