9 Best
Wave Shield Arduinos
-
Product Highlights- The best mp3 shield for arduino
- Features the vs1053b codec chip - decodes ogg vorbis, mp3/mp2/mp1, mp4, aac, wma, flac, wav/pcm, midi. encodes ogg or wav/pcm
- Soldering of header pins required
- This version has stereo line/headphone output
- Speakers, headphones, sd card, and arduino not included
SHOWview product -
Product Highlights
- This nano board with already soldered pins is ideal for the beginner or the professional hobbyist who wants to program with the arduino ide!
- The header pins have been soldered for this package and the combination set brings more convenience when used with the nano expansion board.
- Ch340g replace ft232rl. (if your device can't recognize it, you just need to install the driver for the ch340g, you can find the driver here: https://sparks.gogo.co.nz/ch340.html)
- This board has 22 digital inputs and outputs and 8 analogue inputs - a module with many interfaces. it is enough for most applications.
SHOWview product -
Product Highlights
- Can very easily access the arduino device to dmx512 network.
- Equipped with high-quality neutrik 3-pin plug.
- Http://www.cqrobot.wiki/index.php/dmxshieldforarduino-cqr0260
- Do not need to buy expensive equipment for loading protocol change.
- Ensure a reliable connection with other music devices.
SHOWview product -
Product Highlights
- Clock 20mhz, flash 48kb, sram 6kb, eeprom 256byte.
- Power supply architecture based on a high efficiency dc-dc converter allows powering the board at up to 21v and to drive output peripherals with up to 950ma without overheating.
- Small (48mm x 18mm), robust and powerful board based on the atmega4809 avr processor
- Two 15 pins connectors (one on each side) that are pin to pin compatible with the original arduino nano
- Get started in minutes with thousands of sketches available in open source
SHOWview product -
Product Highlights
- Apart from the rich grove connectors, on the board you can also see an rst button, a green led to indicating power status, icsp pin, a toggle switch and four row of pinouts.
- Dimensions: 69 mm x 53 mm x 23 mm, weight: g.w 40 g
- The purpose of creating the grove? base shield is to help you get rid of bread board and jump wires. with the rich grove connectors on the base board, you can add all the grove modules to the arduino uno very conveniently!
- Arduino uno seeeduino v4.2 arduino mega / seeeduino mega seeduino lorawan arduino leonardo / seeeduino lite arduino 101 arduino due intel edison linkit one
- Note: if using base shield v2 with seeeduino v3, please solder the pads, p1 and p2.
SHOWview product -
Product Highlights
- This is compatible board with an atmega328p and a ch340g serial converter, 100% compatible with arduino uno r3.
- Friendly: the board is easy to use for arduino starter, it contains everything needed to support the microcontroller; simply connect it to a computer with a usb cable or power it with a ac-to-dc adapter or battery to get started.
- The board is a microcontroller board based on the ch340. it has 14 digital input/output pins (of which 6 can be used as pwm outputs), 6 inputs, a 16 mhz ceramic resonator, a usb connection, a power jack, an icsp header, and a reset button.
- This board has the following new features: 1.0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the reset pin, the ioref that allow the shields to adapt to the voltage provided from the board. in future, shields will be compatible with both the board that uses the avr, which operates with 5v and with the due that operate...
- We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!
SHOWview product -
Product Highlights
- Easy to use-consistent hole alignment,inser pin easily.with extension clips for simple and quick connecting with other boards. with black printed legend,color legend on distribution strips.
- Abundant experiments-the prototype breadboard is compatible with arduino and raspberry pi, led diode, screw terminal, dupont wire, connector, other electric power components or devices for various creating experiments.
- Super solderless breadboard kit -400 point and 830 point breadboards snap together easily in groups are available to meet your various experimental needs, excellent for arduino proto shield.
- Dynamic portability-white abs plastic body with self-adhesive tape on the back.features small size,sturdy and lightweight, able to be easily carried, and fixed on a platform.
- Package component-3pcs 830 tie point breadboards and 2pcs 400 tie point breadboards.
SHOWview product -
Product Highlights
- Easy operation: the chip uses cmos technology, the internal integration of spwm sine generator, dead time control circuit, the multiplier factor range, soft start circuit, protection circuit, rs232 serial communication interface and a serial lcd driver module 1602 functions.
- High performance: pin set up four kinds of pure sine wave output frequency: fixed frequency 50 hz pure sine wave; 60 hz fixed frequency pure sine wave; 0-100 hz pure sine wave frequency is adjustable; 0-400 hz pure sine wave frequency is adjustable. unipolar and bipolar modulation. comes with deadband control, pin set up 4 dead time: 300ns dead time; 500ns dead time; 1....
- Egs002: egs002 "eg8010 + ir2110" driver module + lcd pure sine wave inverter driver board. eg8010 is a digital, function very well bring their own dead-time control of pure sine wave inverter generator chip, used in two-stage dc-dc ac power conversion structure or single-stage dc-ac power frequency transformer boost architecture, an external 12mhz crystal oscillator, to...
- Description: external 12 mhz crystal oscillator; pwm carrier frequency 23.4 khz; voltage, current, real time temperature feedback; overvoltage, undervoltage, overcurrent and overheating protection; soft-start mode pin setting the response time of 1s; serial communication to set the output voltage, frequency and other parameters external; external serial port 128 x 32 lc...
- Lcd description: in the use of the lcd, connection egs002 driver board and lcd cable must use shielded cable, otherwise. inverter, high-voltage high-current environment will seriously interfere with the operation of the drive plate.
SHOWview product -
Product Highlights
- Small (45mm x 18mm), robust and powerful board; 3.3v variant of the nano family. arm cortex-m0+ microcontroller and a pre-certified esp32-based wifi and bluetooth module from u-blox
- Pre-certified module with external processor ensures maintaining rf compliance when writing application code.run directly from high voltages from lead or multi-cell lithium-ion batteries providing 3.3v power supply to peripherals at significant output current
- The ease of use of a nano board with the addition of secure iot and bt connectivity
- Clock up to 48mhz, flash 256kb, sram 32kb, secure wifi and bluetooth connectivity with a 6-axis imu, ecc608a crypto chip provides iot security. two 15 pins connectors (one on each side) that are pin to pin compatible with the original arduino nano
- On-board dc-dc power supply enables the board to be powered up to 21v maintaining high efficiency and offering a lot of current to external devices without overheating
SHOWview product
![Arduino Nano 33 IoT [ABX00027]](https://m.media-amazon.com/images/I/4141WeQ85sL._SL500_.jpg)
Coupon copied
