10 Best
Feeler Gauges
-
Product Highlights- Easy identification: each steel piece of the feeler gauge is marked with a metric and imperial scale for easy measurement, 0.04mm to 0.88mm (0.0015inch to 0.035inch), a total of 32 different sizes of measuring steel plates for your convenience
- Can be bent freely: the blades feeler gauges is thin but sturdy, can be bent freely, not easy to deform or break, so that can easy reach to narrow place or hard to reach place, making the measurement much easier
- Material: the high precision feeler gauges are made of steel, waterproof and rustproof, the edges and surfaces of the feeler gauge are polished. it's full of bright metal texture specially treated, smooth and doesn't hurt your hand
- Convenient to carry: length about 10cm/4inch, movable steel sheet that can be rotated into the steel protector without taking up space. we give two braided keychains, you can use it to hang the dynamometer in the right place
- Widely used: the feeler gauge is suitable for all applications where high precision is required, for example measuring mechanical clearances, engine valve clearances, gaps between molds, spark plugs gaps and bearing clearances
SHOWview product -
Product Highlights
- Metric and imperial dual marked: dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easy identification the feeler and choose the suitable one conveniently.
- How to use: when measuring and adjusting the gap, first select the feeler gauge that meets the gap regulations and insert it into the measured gap, then adjust and pull the feeler gauge until you feel a little resistance and tighten the lock nut, at this time, the feeler gauge marked the value is the measured gap value.
- Quality material: feeler gauge set is made of 65 manganese steel, each feeler gauge is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
- Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corrosion, bending, deformation and damage, simple and convenient.
- Use for: the feeler gauge is used to measure the gap size. when checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.it is mainly used for checking the gap value between two joint surfaces.
SHOWview product -
Product Highlights
- Built to last: constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion; each blade has sizes laser etched for easy identification; blades are bound within a blade protector to prevent loss of individual blades;
- Metric sizes (mm):-0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00 mm
- Easy to use and convenient- made of manganese steel, each measuring feeler gauge has 32 blades thickness; foldable, easy and convenient to take and store. easily measure gap widths with the abn valve offset feeler gauge. it is great for use on guitars, engines, and so much more. includes metric and inch sizes etched on each blade.
- Easy identification dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.040 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification
- Inch sizes(inch)-0.0008, 0.0012, 0.0015, 0.002, 0.0025, 0.0028, 0.003, 0.0036, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.015, 0.016, 0.018, 0.020, 0.022, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.040 inches
SHOWview product -
Product Highlights
- The feeler gauge set is ideal for use in the engine industry
- Technical details: measuring range 0.05 – 2.00 mm / 0.05-0.10-0.20-0.30-0.40-0.50-0.60-0.70-0.80-0.90-1.00-1.10-1.20-1.30-1.40-1.40-1. .50-1.5.60-1.70-1.80-1.90-2.00 mm / 21 sheets / length 100 mm
- The teaching sheets are made of hardened spring steel and are therefore very robust and durable
- Nickel-plated cover sheet with locking screw
- The measurements are shown in mm and inches on each gauge sheet
SHOWview product -
Product Highlights
- 【dual marked metric and imperial scale】 feeler gauge size measuring of 0.0015 inch to 0.035 inch (0.04mm-0.88mm). offset feeler gauge size measuring of 0.005 inch to 0.020 inch (0.127mm-0.508mm) with an increment of 0.001”. the laser-etching gauge values on the blades are neat and clear.
- 【make it your custom set】initially one blade of standard thickness is kept, if there is extra gap even after a blade is inserted then the blades of the feeler gauge can be used in various combinations as per the requirement, that is different blades having different thickness can be stacked together to obtain a gauge for a size.
- 【sturdy hand-held tool】this set of feeler gauge is made of high quality 65 manganese steel, so it is of high hardenability and hardness, also equipped with strong toughness and corrosion resistance. feeler gauges provides the user with a visual clue of how wide a gap is, it’s a great addition to your tool box.
- 【removable&adjustable blades】 knurled knob on pivot shaft allows you to release clamping pressure so the blade move easily, take the individual ones out that you want. tighten to provide stable handle using the body and the rest of the blades. complete control of the friction for any blade angle direction.
- 【wide range of application】 feeler gauges are commonly used across a wide range of industries such as aerospace, automotive, pharmaceutical, oil & gas, and general industrial machining. also good for measuring the string action (height) on guitar and bass necks and making adjustments. a nice unit for guitar work.
SHOWview product -
Product Highlights
- Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification
- Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035
- Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness; foldable feeler gauges, easy and convenient to take and store
- Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88
- Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that
SHOWview product -
Product Highlights
- ⭐【dimension】total size: 300mm x 15 x 6mm/12" x 0.6" x 0.24"(l x w x h)
- ⭐【easy to identify】 every blade has its thickness clearly on it for easy identification.
- ⭐【material】the feeler gauge is constructed from manganese steel with a lube oil coating to prevent pitting and corrosion.
- ⭐【specification】 metric sizes (mm):0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00. the feeler gauge is marked in metric. thickness ranges from 0.02mm to 1.00mm.
- ⭐【package content】1pcs x feeler gauge
SHOWview product -
Product Highlights
- 【metric and imperial dual marked】dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easy identification the feeler and choose the suitable one conveniently.
- 【anti-rust 65 manganese steel】there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, and please don't put on the humid environment.
- 【two kinds of feeler gauge 】feeler gauge set, straight feeler gauge with 32 pieces blades and 16-piece blades offset valve bent feeler gauge.
- 【 360-degree swivel design 】the feeler gauge set allows you to unfold or fold them easily and carry them with you. you could disassembled into a separate feeler gauge to use by adjusting the screw.metal fastening screws,and durable.
- 【use for】the feeler gauge is used to measure the gap size. when checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.it is mainly used for checking the gap valve between two joint surfaces.
SHOWview product -
Coupon copied
